IGT Installation Guide For Vendors Proprietary and Confidential
Contents Product Information .......................................................................................................................................... 3 Safety Information ............................................................................................................................................. 3 FCC .............................................................................................................................................................................
Product Information Card Reader Terminal: ◦ ◦ ◦ NFC Module: ◦ ◦ ◦ Model Number: PFAY0H Input: 15 VDC, 2 A Power Adaptor · Model: MDS-030AAC15 · Input: 100-240 VAC, 0.6-0.8 A, 50/60 Hz · Output: 15 VDC, 2 A, 30W, LPS Model Number: 142HL8 Input: 5 VDC, 0.5 A Power Adaptor · Model: PS39WR · Input: 100-240 VAC, 0.2 A, 50/60 Hz · Output: 5.25 VDC, 1A, 5W, LPS Safety Information Power PFAY0H using the power adaptor shipped with the equipment (model MDS-030AAC15).
Welcome to IGT IGT is an identity and payments solution that provides customers an effortless way to identify and pay at a variety of brick-and-mortar retail experiences. IGT associates customer identity with the transaction, feeding into existing rewards or loyalty programs, and removes friction and time spent at the checkout counter. Once set up, a first-time customer will insert their credit card into the device and hover their palm above the device to sign up.
Parts List IGT consists of five hardware components: (1) (2) (3) (4) (5) Palm Scanner Palm Scanner AC/DC Adapter Payment NFC Antenna with Mounting Plate Payment Module USB AC/DC Adapter Payment Electronic Module with Mounting Clip Proprietary and Confidential | IGT QuickStart Guide | Page 5 of 11
Tools Tools are not required unless you are mounting to a countertop. If mounting to a countertop, use the hardware recommended with the specific mounts. Installation Step 1: Attach the Payment NFC Antenna and Electronics Module The payment NFC antenna attaches to the merchant’s payment terminal and works with the electronics module to complete the payment transaction using the palm scanner.
Back and front of Electronics Module • Mount using included clip: Remove the clip from the module and place the POS cable in between the clip and the module and snap the clip back on to the module. Electronics module attached to POS cable with clip 4. Plug the USB cable from the electronics module into the AC/DC power adapter and plug it in to an outlet.
Step 2: Set up the Palm Scanner 1. 2. Insert the power plug end of the power cord through the mounted base on the table. Insert the power cord into the wall and the opposite end into the back of the scanner. The device will turn on automatically. Palm Scanner power cord connection 3. 4. Loosen the mount screw (if necessary) and place the scanner face up on the mounted base. The device screen and card reader insert needs to be facing towards the customer.
Step 3: Virtually set up the IGT Device Once IGT is installed, complete the following virtual set up steps: 1. 2. 3. 4. Search for and connect to a WiFi network. Enter your WiFi password. Set up device. This will be completed automatically – device will check for updates, install WiFi certificate, and pair with the other devices. Select OK, I got it to complete set up. IMPORTANT NOTE: Do NOT unplug the machine during the virtual set up process.
Step 4: Test the IGT Device Once the Pay with your palm page displays, the device is ready for use, no testing is required. If you want to test the device with a supported credit card, follow the sign-up process as if you were a new customer to test the sign up process and the pay for an item. NOTE: If you have signed up with a credit card before, then you can sign up with different credit card to walk through the steps or you can use your other palm to sign up again. Sign up and pay for an item: 1.
Specifications Palm Scanner Size Width:78 mm Length: 218 mm Height: 77 mm Weight 300 g Power 110/220 VAC input AC to DC adaptor provided, 15 VDC x 2 A peak output Operating Temperature 10C to 35C Working Distance 3.3 ± 1.0 inches above white light ring Display 5.0” color display, HD720 resolution, up to 400 nits brightness Touch Interface Capacitive Touch Display USB Type C, device for point-of-sale (POS) integration WiFi 802.11 ac 2x2 MIMO Blue Tooth BLE v4.
