User Guide
■
Naming
of
the
parts
T
o
p
Bottom
“Next”
and
“B
ac
k”
butt
ons
Convenient for browsing the Internet
It doesn’t support Mac
and Android.
This cannot be changed
to other functions.
Pairing button
Please see the
instructions manual
for the pairing
method.
■
Auto-speed control function (ASC)
for automatic speed adjustment
Track ball
will automatically adjust to
optimize the pointer speed.
Automatic function where the track ball adjusts the pointer
speed (resolution/dpi). It automatically adjusts between
450-1200 dpi according to the speed at which the ball moves. If
you move the ball quickly, the pointer will also move faster over
large distance. If you move it slowly, the pointer speed will
become slow and it would allow finer operation.
By pressing the SPEED button, you may switch over to the fixed mode.
Points to keep in mind when using the auto mode (For Windows
The following settings are recommended for making the best out
of this function
Go to ‘Control Panel’ > ‘Mouse properties’ > 'Pointer option’, and
uncheck ‘Improve the pointer’s accuracy’.
If this is not unchecked, it may interfere with this function.
Lamp will start blinking when the mode is changed
•
Lamp blinks once: 600dpi(fixed)
•
Lamp blinks twice: 450- l 200dpi(auto/factory default setting)
Higher is the dpi (resolution), faster will be the movement of the
pointer.
If the lamp is blinking continuously, it means the battery is low.
Replace the batteries at the earliest.
■
When using the track ball for the first time
～
Try the following until you get used to it
～
0
Reducing the pointer speed
When
it
is
moving
too
fast
because
of
which
the
pointer
doesn’t
move
the
way
you
want,
reduce
the
pointer
speed
in
the
computer
(OS)
settings.
For Windows
I
[
C
o
n
t
r
o
l
p
a
n
e
l
]
→
[
D
i
s
p
l
a
y
a
n
d
p
r
i
n
t
e
r
s
]
→
[
M
o
u
s
e
]
→
[
M
o
u
s
e
p
r
o
p
e
r
t
i
e
s
]
→
[
P
o
i
n
t
e
r
o
p
t
i
o
n
s
]
→
[
S
p
e
e
d
]
I
F
o
r
M
a
c
I
[System
Preferences]
→[Mouse]→[Tracking speed]
F
o
r
A
n
d
r
o
i
d
[
S
e
t
t
i
n
g
s
]
→
[
L
a
n
g
u
a
g
e
a
n
d
i
n
p
u
t
]
→
[
P
o
i
n
t
e
r
s
p
e
e
d
]
0
Tilt the hand
Although there is no fixed way to hold
it, if you tilt your right hand slightly to
make the thumb moveable, you can
roll the ball comfortably. The
operation stabilizes when you put the
right side of the palm on the desk.
The thumb becomes
easy to move.
,'’’’’'‘
,
’
,
‘
,
＇
1|`
‘
,
,'9999
9
'
｀
‘
,
■ C
leaning
the
track
ball
You can remove the ball from the main body by pushing it out from
the ball removal hole at the bottom. Please clean it regularly.
Please wipe off the ball with a dry cloth etc.
Remove the dust that is accumulated in the three supporting balls on
the main body with a cotton swab etc.
Supporting
balls
Laser sensor
�
When cleaning the vicinity of the
laser sensor, please be careful
not to damage the sensor.
Using a wireless device inside an aircraft or near a
medical device
The use of wireless devices in aircraft is prohibited. Please turn off the
power when carrying such devices in aircraft. Do not use this product in
places such as hospitals where the use of radio equipment is prohibited.
Radio waves may affect medical equipment. Moreover, if you are using
medical equipment such as pace maker, please consult your doctor.
Warrant provision
●This product has passed strict inspection. In the event the product malfunctions
during its normal use within the warranty period, we will give refund or exchange
it for the equivalent item without any charge in accordance with this warranty
provision. Please bring your product and warranty card to your dealer.
●However, the warranty provision will not apply in the following cases.
1. When the date of purchase is not clearly written
2. When the product has malfunctioned and damaged due to incorrect handling, or when the
product was repaired or remodeled
3. When malfunction or damage has occurred because of moving, dropping or transporting the
product after it is purchased
4. When malfunction or damage has occurred because of fire, natural disaster, or abnormal voltage
5. Malfunction and damage occurred because of defect of other devices connected to the product
or other external factors
※Warranty is valid in Japan only.
※Warranty card will not be reissued, so please preserve it carefully.
※Warranty is valid in Japan only.
※Warranty card will not be reissued, so please preserve it carefully.
Left and right
buttons
Wheel button
SPEED button
Power supply
switch
Hole for taking out
the ball
Ball
It can be easily removed
for maintenance.
Auto mode
Fixed mode
Pressing the SPEED
button will change the
mode
Put the side of
the hand on the
desk
Battery box
SPEED button