User Manual

ManualsBrandsNady ManualsAudio for VideoReference Measurement Microphone

Speciﬁcations

Transducer Type Omni-directional electret condenser

Impedance 600 Ohms

Sensitivity -40dB (0dB = 1V/Pa)

Frequency Response 20Hz-20kHz

Current Consumption <2mA

Maximum SPL >120dB

Connector Gold-plated XLR

Phantom Power 15-48V

Dimensions Diameter: 0.87” (22.22 mm)

Length: 7.5” (190 mm)

Weight 4 oz (120 g)

Speciﬁcations subject to change at any time without prior

notice for purposes of product improvement

USER GUIDE

CM-100

Condenser Measurement Microphone

Precautions and Care

• Themicrophoneshouldneverbedroppedorsubjected

to extreme shock. Store only in a padded case to protect it

duringtransport

• Keepthemicrophoneawayfromextremelyhigh

temperatures(above140˚For60˚C)andhumidityand

avoidleavingitindirectsunlightforlongperiodsoftime

• Whenusingthemicrophoneoutdoors,avoidgettingitwet

• Afteruseinahigh-moistureapplicationsuchasastage

performance,wipeoffthemicrophonewithadrycloth

andallowittoairdry

• Donotstoretheunitinaclosedspace(e.g.,aplasticbag)

untilallmoisturehasevaporated

Frequency Response / Polar Pattern

Standard Items Supplied

• CM100microphone

• Microphoneclip

• Foamwindscreen

• Instructionmanual

Optional Accessories

• SMCC-1Foampaddedplasticcarryingcase

• SMPS-148Vphantompowersupply

• MST-5Bmicrophonestand

• XC-20XLRlownoise20ft.microphonecable

ThankyouforchoosingtheNadyCM-100ultralinearclassicdiaphragmelectret

condensermicrophone.Optimallydesignedforprecisealignmentapplications

suchasroomacousticscorrections.Perfectalsoformanyrecordinguses,

bothinstrumentsandvocals.

Features

• True,symmetricomni-directionalpattern,highsensitivity,

minimalself-noise,increaseddynamicrange,high

SPLcapability,andextremelysmooth,linear15Hzto

20KHzfrequencyresponseprovideultimateprecise

measurementsandtransparentrecordings

•Perfectforusewithrealtimeanalyzersforprecise,accurate

roomacousticsalignments

•Especiallysuitedforhighlyeffective,detailedrecordingof

acousticguitarsandvocals

•Ruggedconstruction,gold-platedXLR,andinternalassembly

shockmountformaximumreliability

•Includesfoamwindscreenforoutdoorapplicationsandmic

standclip(including5/8”to3/8”adapter)

Summary of content (2 pages)

PAGE 1
USER GUIDE CM-100 Condenser Measurement Microphone Thank you for choosing the Nady CM-100 ultra linear classic diaphragm electret condenser microphone. Optimally designed for precise alignment applications such as room acoustics corrections. Perfect also for many recording uses, both instruments and vocals.
PAGE 2
Operation Connecting the CM-100 The CM 100 can be used in live or studio alignment applicatoins or studio recording. It must be powered by 48V phantom power (such as supplied by the optional Nady SMPS-1 phantom power supply or a mixing console/alignment device equipped with phantom power), and amplified by a microphone pre-amp (such as built into a mixer, or a standalone unit).