Owner’s Manual EO3 Personal In-Ear Monitor Wireless System
Contents Introduction.............................................................................................................................. 3 Important Note......................................................................................................................... 3 EO3 Transmitter....................................................................................................................... 4 EO3 Receiver...........................................................................
Introduction Thank you for choosing the Nady EO3 Personal In Ear Monitor™ wireless system, we know you will be very pleased with its performance and features. The EO3 provides high quality, yet cost-effective in-ear monitoring to on stage performers or behind the scenes personnel. The system is designed to be very easy to use and requires no installation. The EO3 consists of one wireless transmitter (EO3-T) and one or more wireless bodypack receivers (EO3-R) on the same channel.
EO3 Transmitter The EO3 transmitter is a compact transmitter that broadcasts on one of eight channels in the 72-76 MHz band, to any number of EO3 wireless bodypack receivers on the same channel. The system provides a 300 ft.
Confirming Correct Installation The transmitter’s TX LED (6) will flash when a microphone or line level signal is broadcast by the transmitter. If “TX” does not flash, turn the audio input gain control clockwise. This will increase audio level and cause “TX” to flash along with the program source. When “TX” is flashing, the transmitter is broadcasting properly. Test the transmitter with an EO3 receiver. This procedure is explained in the receiver instructions.
EO3 Receiver The EO3 receiver is a pocket sized wireless audio receiver with an output for earbuds to provide in ear monitoring, and offers these features: • Any number of EO3 receivers can be used with a single EO3-T transmitter • Ultra compact and lightweight • Preset to one of eight channels in the 72‑76 MHz range • Loudness adjustable with volume control—provides up to 130dB in-ear monitoring • Antenna is integral with earphone cord • A pair of mini binaural EB-3 earphones included, with optional-use EM
Adjusting Ear Monitor Volume Testing Receiver Range Listen for your program source, and adjust receiver volume to a comfortable listening level. The EO3 receiver is capable of providing listening levels loud enough to be heard in use with a rock band. Many bands use on stage loudness levels that with repeated exposure could pose a threat to their hearing. Therefore, it is very important that the EO3 be used at a reasonable and comfortable listening level.
EO3 Specifications OVERALL SYSTEM PERFORMANCE Frequency Response Signal-to-Noise Ratio Total Harmonic Distortion RF Carrier Frequencies Frequency Stability Modulation Operating Range 100 Hz - 10KHz ± 3 dB 60 dB < 0.5% Eight factory preset channels between 72-76 MHz Channel AA: 72.1, BB: 72.3, CC: 72.5, DD: 72.7 EE: 72.9, FF: 75.5, GG: 75.7, HH: 75.9 Better than .
Service Information In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service Department at (510) 652-2411 to obtain a Return Authorization (R/A) Number and service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package that you are returning.
One-Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems.
6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www.nady.