SVENSKA NEDERLANDS DEUTSCH ITALIANO PORTUGUÊS ESPAÑOL FRANÇAIS On-Ear Headphones ENGLISH VISO HP30 РУССКИЙ ® Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS OSHA GUIDELINES FOR NOISE EXPOSURE LIMITS The Occupational Safety Health Administration (OSHA) has issued headphone usage recommendations for maximum daily exposure and sound pressure levels [measured in decibels (dB)]. A decibel is a unit of sound measurement that increases exponentially with volume. For example, conversational speech is typically around 60dB, and a rock concert in a stadium is often about 110dB.
The NAD VISO HP30 On-Ear Headphones benefits from true headphone innovation that lets you sense the music around you, feel every beat, and hear a more open soundstage. Infused with the innovative RoomFeelTM technology, soundstages are dramatically expanded, adding back warmth and open sound, without altering the audio signal. WHAT’S INSIDE THE BOX Packed with your VISO HP30 you will find: • Apple compatible tangle-free ribbon cable • Additional standard ribbon cable • Carrying case • Cable clip • 3.
IDENTIFICATION OF PARTS AND ACCESSORIES 3 AIRLINE ADAPTOR R ENGLISH 1 STANDARD HEADPHONE RIBBON CABLE FRANÇAIS • ESPAÑOL • For a complete listening experience on most devices, use the standard headphone ribbon cable. Plug the “L” (left) end of the cable into the corresponding input at the bottom of “L” (left) ear pad and “R” (right) end of the cable into the corresponding input at the bottom of the “R” (right) ear pad. Connect the other end into the 1/8” (3.5mm) stereo socket on your music player.
ENGLISH IDENTIFICATION OF PARTS AND ACCESSORIES PROCEDURE Answer or end call • Press the centre button once to answer or end a call. Decline incoming call • Press and hold the centre button for two seconds, then release. There will be two beeps to indicate successful operation. Use call waiting • To switch to an incoming call and put an in-progress call on hold, press the centre button, and then repeat to switch back to the previous call and put the new call on hold.
HANDLING AND MAINTENANCE ENGLISH EAR CUP ATTACHMENT AND REMOVAL The ear cups have been designed to be removable for cleaning and replacement purposes. The ear cups have four magnets for easier removal and attachment. Constant removal of the ear cups is not recommended. 2 Fit the ear cup to the ear pad until the magnets snap them together. Ensure fit for form and no misalignment. FRANÇAIS ESPAÑOL DETACH EAR CUP 1 Grasp and lightly pinch both sides of the ear cup that needs to be removed.
Low or no audio output. Crackling noise or intermittent audio. POSSIBLE SOLUTIONS • Audio source is powered off. • Power on audio source. • Audio volume level is set to minimum. • Set audio to medium volume level. • No connection between audio source and • ear pad. • Ensure full ribbon cable connection between ear pad and audio source. • Audio source is muted with Apple control feature. • Press center button of Apple control feature to restore audio.
www.NADelectronics.com ©2015 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.