NEDERLANDS Owner’s Manual SVENSKA DEUTSCH ITALIANO ESPAÑOL FRANÇAIS Compact Disc Player ENGLISH C 545BEE РУССКИЙ ®
IMPORTANT SAFETY INSTRUCTIONS ENGLISH Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1 Read instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain instructions - The safety and operating instructions should be retained for future reference.
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS IMPORTANT INFORMATION FOR UK CUSTOMERS DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
INTRODUCTION INTRODUCTION GETTING STARTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 QUICK START. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 USING THE C 545BEE – CD 8 REMOTE CONTROL. . . . . . . . . . . . . . . . . . 12 NUMERIC KEY PAD . . . . . . . . . . . . . . . . . .
INTRODUCTION GETTING STARTED ENGLISH UNPACKING AND SETUP QUICK START WHAT’S IN THE BOX Packed with your C 545BEE you will find: • An audio cable connector • The CD 8 remote control with two AA batteries • A detachable AC power cord • This owner’s manual In case you simply cannot wait to experience the performance of your new NAD C 545BEE, we provide the following “Quick Start” instructions to get you underway.
IDENTIFICATION OF CONTROLS 12 FRANÇAIS 11 ENGLISH FRONT PANEL 3 DISC TRAY: With the disc tray open, insert a CD or other compatible media disc face down onto the tray. “No Disc” appears on the C 545BEE’s VFD if the disc is placed upside down or there is no disc loaded. NOTE This player is not designed to accommodate neither a “damping disc” placed on a CD nor two CDs stacked together. It plays audio CDs, but not discs identified as CD-V, DVD, CD-I, CD-ROM or PHOTO CD.
IDENTIFICATION OF CONTROLS FRONT PANEL ENGLISH 8 REPEAT: A particular track or file can be repeatedly played back by pressing this button. To repeat the playback of a particular track or file, press the C 545BEE’s [REPEAT] button once – a corresponding “REPEAT” icon is illuminated in the VFD. Pressing the same [REPEAT] button a second time will repeat all the tracks or files - a corresponding “REPEAT ALL” icon is illuminated in the VFD.
IDENTIFICATION OF CONTROLS ENGLISH REAR PANEL FRANÇAIS 6 1 2 3 4 5 4 +12V TRIGGER INPUT: The +12V Trigger input allows the C 545BEE to be switched remotely from standby mode to ON and vice-versa by ancillary equipment such as a preamplifier, AV processor, etc. The controlling device must be equipped with a 12V trigger output to use this feature. 2 LINE OUT: Connect to the corresponding analog audio input of an amplifier, receiver or stereo system.
IDENTIFICATION OF CONTROLS CD 8 REMOTE CONTROL ENGLISH FRANÇAIS ON: Switch ON C 545BEE. OFF: Switch OFF C 545BEE. RAND: Play tracks/files in random mode. RPT: Repeat track, file or whole disc. RPT A-B: Repeat sequence. DISP: Show playback time and other display information. PROG: Enter or exit program mode. CLEAR: Delete programmed track/file. DIM: Reduce, turn off or restore VFD brightness. FILTER: Switch between NORMAL and SLOW bandwidth. STOP: Stop playback.
OPERATION PROGRAMMING The program function enables you to store your favorite tracks from any disc in the player memory. When programming a sequence of tracks, the C 545BEE must be in STOP mode. Using the CD 8 remote control, enter your desired program sequence through the following steps 1 Press [PROG]. The display indicates “P01 T000”. The “000” in the “T000” keeps on blinking, meaning that the player is awaiting the first Program entry.
OPERATION USING THE C 545BEE – CD 8 REMOTE CONTROL ENGLISH A wireless remote control is provided with your compact disc player, enabling you to operate playback functions from the comfort of your chair or from virtually anywhere in the room. For reliable operation there should be a clear line-of-sight path from the remote control to the front of the CD player. If the player does not respond to remote commands, it may be that this line-of-sight path is obstructed by clothing, paper or furnishings.
REFERENCE FRANÇAIS STORING DISCS After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. CLEANING DISCS Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
www.NADelectronics.com ©2008 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved.