SVENSKA NEDERLANDS DEUTSCH ITALIANO PORTUGUÊS ESPAÑOL FRANÇAIS Stereo Integrated Amplifier ENGLISH C 356BEE РУССКИЙ ® Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS ENGLISH SAVE THESE INSTRUCTIONS FOR LATER USE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO EQUIPMENT. FRANÇAIS ESPAÑOL PORTUGUÊS ITALIANO DEUTSCH NEDERLANDS SVENSKA 1 Read instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain instructions - The safety and operating instructions should be retained for future reference.
FRANÇAIS THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. PORTUGUÊS ESPAÑOL THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH NOTES ON ENVIRONMENTAL PROTECTION At the end of its useful life, this product must not be disposed of with regular household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s manual and packaging, point this out. FRANÇAIS The materials can be reused in accordance with their markings.
INTRODUCTION It is especially important that sufficient ventilation be provided. If you are contemplating locating the C 356BEE within a cabinet or other furniture, consult your NAD audio/video specialist for advice on providing adequate airflow. NOTES ON INSTALLATION Your C 356BEE should be placed on a firm, level surface. Avoid placing the unit in direct sunlight or near sources of heat and damp. Allow adequate ventilation. Do not place the unit on a soft surface like a carpet.
IDENTIFICATION OF CONTROLS FRONT PANEL ENGLISH 1 2 3 4 5 6 FRANÇAIS ESPAÑOL 7 8 PORTUGUÊS 1 STANDBY BUTTON: With the rear panel POWER switch set to ON position, press this button to switch ON the C 356BEE from standby mode. The Standby LED indicator will turn from amber to blue. Pressing the STANDBY button again turns the unit back to standby mode. The C 356BEE can also be switched ON from standby mode by pressing any of the front panel buttons.
IDENTIFICATION OF CONTROLS MP (MEDIA PLAYER): Selects a line-level source connected to the MP sockets as the active input. If an external Media Player is connected to the front MP socket (using a 3.5mm stereo plug) while listening to a MP line-level source, the external Media Player will be directly selected with the MP line-level source immediately disconnected. It is recommended to mute the volume or switch to a different input before plugging/unplugging the external Media Player cable.
IDENTIFICATION OF CONTROLS REAR PANEL ENGLISH 19 FRANÇAIS ESPAÑOL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 120V Version Model Only PORTUGUÊS ATTENTION! Please make sure that the C 356BEE is powered off or unplugged from the mains power source before making any connections. It is also advisable to power down or unplug all associated components while making or breaking any signal or AC power connections.
IDENTIFICATION OF CONTROLS 11 PRE OUT 1: The PRE OUT 1 sockets can be used to drive an additional power amplifier. Use a twin RCA-to-RCA lead to connect the left and right “Audio Input” of the Power amplifier or processor to the PRE OUT 1 sockets. Always turn the C 356BEE and associated external power amplifiers OFF before connecting or disconnecting anything to the PRE OUT 1 sockets. The PRE OUT 1 output signal will be affected by the C 356BEE’s volume and tone control settings.
IDENTIFICATION OF CONTROLS REAR PANEL ENGLISH 19 MDC CLASSIC UPGRADE SLOT: Remove cover to install the optional Modular Design Construction (MDC) module. An example of a C 356BEE-compatible MDC Classic module is the PP 375 Phono Preamplifier module. The PP 375 is integrated into the chassis of the C 356BEE, automatically assigned to the DISC input and its level well matched to the other sets of line level input.
IDENTIFICATION OF CONTROLS Another optional MDC module that can be installed in the C 356BEE is the MDC DAC module. When installed with C 356BEE, the MDC DAC module brings the convenience of music to your system with NAD musical performance fully intact. These timing variations create a condition called “jitter” – small variations that create a harsh distortion.
IDENTIFICATION OF CONTROLS SR 8 REMOTE CONTROL ENGLISH USING THE SR 8 REMOTE CONTROL FRANÇAIS 2 The SR 8 remote control handset handles the key functions of the C 356BEE as well as other NAD Stereo Receivers, Integrated Amplifiers and Preamplifiers. It has additional controls to remotely operate NAD CD Players, AM/FM Tuners and dedicated AM/FM/DB Tuners. It will operate up to a distance of 23ft (7m). Alkaline batteries are recommended for maximum operating life.
IDENTIFICATION OF CONTROLS ENGLISH SR 8 REMOTE CONTROL PORTUGUÊS ESPAÑOL FRANÇAIS CD PLAYER CONTROL (for use with compatible NAD CD Player): Set the DEVICE SELECTOR to “CD” in order to gain access to these buttons. Some of the control buttons below are applicable only to specific NAD CD Player models; check the owner’s manual of your NAD CD Player for control button compatibility.
IDENTIFICATION OF CONTROLS SR 8 REMOTE CONTROL ENGLISH USING THE SR 8 REMOTE CONTROL LIBRARY The SR 8 can store a different library of default NAD codes for each of its DEVICE SELECTOR “pages.” If the original default library does not control your NAD CD player, DVD player, or other component, follow the procedure below to change the library code. Refer as well to the table below for a list applicable NAD Library Codes with their corresponding NAD models.
REFERENCE • Switch off Mute. • Rear PRE OUT/MAIN IN amp links not fitted. • Fit links. • Balance control not centered. • Center Balance control. • Speaker not properly connected or damaged. • Check connections and speakers. • Input lead disconnected or damaged. • Check leads and connections. No audio despite the presence of an active input at DISC rear panel input terminals. • DISC input is disabled due to an installed MDC module at the MDC Classic Upgrade slot.
REFERENCE SPECIFICATIONS ENGLISH PREAMPLIFIER SECTION FRANÇAIS ESPAÑOL LINE LEVEL INPUT, PRE OUT THD1 20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100 Signal-to-Noise Ratio Channel separation -1 kHz 10 kHz Input impedance (R and C) Maximum input signal Output impedance - Pre out Tape out Input sensitivity Frequency response Maximum voltage output -IHF load 600 ohms load TONE CONTROLS Treble Bass <0.005 % at 2 V out >106 dB (IHF; A-weighted, ref. 500 mV out, unity gain) >114 dB (A-weighted, ref.
REFERENCE ENGLISH SPECIFICATIONS PHONO SECTION (WITH OPTIONAL PP 375 INSTALLED) MM/MC IN, PRE OUT ESPAÑOL FRANÇAIS 100 ohms (R) 180 pF (C) 47 kohms (R) 180 pF (C) 0.38 mV 1 kHz 5.0 mV 1 kHz 39 uV 1 kHz 0.56 mV 1 kHz 0.6 mV/5.9 mV/58 mV (20 Hz/1 kHz/20 kHz) 9.3 mV/85 mV/850 mV (20 Hz/1 kHz/20 kHz) 57.0 dB (at 1 kHz, 10 kohms load) 34.2 dB (at 1 kHz, 10 kohms load) <0.009 % (20 Hz – 20 kHz, 4 Vrms TAPE OUT) >78 dB (ref. 0.5 mV input, 10 ohms source) >75 dB (ref. 5 mV input, IHF cartridge source) ±0.
www.NADelectronics.com ©2015 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.