C 328 SVENSKA РУССКИЙ Owner’s Manual NEDERLANDS DEUTSCH © NAD C328 ITALIANO ESPAÑOL FRANÇAIS Hybrid Digital Integrated Amplifier ENGLISH ®
IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1. Read instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
INTRODUCTION GETTING STARTED ENGLISH IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .2 WHAT’S IN THE BOX INTRODUCTION Packed with your C 328 you will find • Two detachable mains power cord • AMP 3 remote control with 3V CR2025 battery • Bluetooth antenna • Quick Setup Guide FRANÇAIS FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 REAR PANEL . . . . . . . . . . . . . . . . . . .
IDENTIFICATION OF CONTROLS ENGLISH FRONT PANEL 5 6 7 8 1 STANDBY BUTTON • Press Standby button to switch ON the C 328 from standby mode. When the C 328 is powered up from standby mode, this indicator will change in color from amber to red and finally blue to indicate operating mode. • Pressing Standby button again switches back C 328 to standby mode. The Power indicator will change to amber color. • The Standby button cannot activate the C 328 if the rear panel POWER switch is off.
IDENTIFICATION OF CONTROLS REAR PANEL ENGLISH 1 2 3 4 SERVICE FRANÇAIS © NAD C328 ESPAÑOL 5 6 7 8 9 10 11 12 ATTENTION! Please ensure that the C 328 is powered off or unplugged from the main power source before making any connections. It is also advisable to power down or unplug all associated components while making or breaking any signal or AC power connections. ITALIANO 1 BT ANTENNA • Connect supplied Bluetooth antenna to the BT antenna terminal.
IDENTIFICATION OF CONTROLS ENGLISH REAR PANEL FRANÇAIS 12 SPEAKERS • Connect C 328’s Right speaker terminals marked “R +” and “R-” to the corresponding “+” and “-“ terminals of your designated right speaker. Repeat the same for C 328’s Left speaker terminals and corresponding left speaker. • Double check the speaker connections before powering up the C 328. IMPORTANT NOTES • The blue terminals must never be connected to ground (earth).
IDENTIFICATION OF CONTROLS AMP 3 REMOTE CONTROL ENGLISH 1 1 4 2 FRANÇAIS 3 5 BASS DIM 6 1 ON: Power up unit from Standby mode to operating mode. OFF: Switch unit to Standby mode. 2 SOURCE d/f: Select through source input selections. 3 DIM: Reduce, turn off or increase display brightness level. 4 MUTE: Temporarily switch off or restore audio. MUTE mode is indicated by “- - - -“ as shown in the display window. Rotate VOLUME knob or press VOLUME d/f to restore audio.
OPERATION AUTO STANDBY Auto Standby feature is an integral feature of C 328 that conforms to European ecodesign regulations. The C 328 can be setup to automatically go to standby mode if there is no user interface interaction or no audio at current source within 20 minutes. Follow below procedure to enable or disable auto standby mode. Enable/Disable Auto Standby mode At operating mode, press and hold together SOURCE s and BASS EQ buttons until “ON” is shown in the front panel display.
OPERATION USING THE C 328 ENGLISH INFRARED LEARNING Infrared (IR) Learning enables any non-NAD remote control learn IR remote control codes. With the learned codes, the configured non-NAD remote control can be used to command or operate the C 328. The IR remote control codes are based from the supplied AMP 3 remote control. FRANÇAIS HOW TO LEARN IR REMOTE CONTROL CODES 1 Press and hold at the same time front panel BASS EQ and a SOURCE buttons until “F1” appears on the front panel display.
REFERENCE PHONO IN/SPEAKER OUT THD (20 Hz – 20 kHz) Output impedance 11 ohms ANALOG IN/SUBWOOFER OUT Signal-to-Noise Ratio Frequency response (RIAA deviation) Channel separation THD (20 Hz – 20 kHz) <0.005 % at 1 V out Signal-to-Noise Ratio Frequency response >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain) ±0.
www .NADelectronics .com ©2017 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.