Mytek Stereo 192 Sample Rate Converter – User Manual Stereo 192 Sample Rate Converter User Manual ver. 1.2 / May 2011 © Mytek Digital 2011 www.mytekdigital.
Mytek Stereo 192 Sample Rate Converter – User Manual This manual may be updated Download the newest version at: http://www.mytekdigital.com/download_library/ For technical support, technical tips and support check: http://www.mytekdigital.com or contact Mytek tech support at: highend@mytekdigital.com or at: tel. (347) 384-2687 fax. (212) 202-5331 Mytek Digital 148 India St. FL 1 Brooklyn, NY 11222 USA www.mytekdigital.
Mytek Stereo 192 Sample Rate Converter – User Manual Content Introduction..................................................................................4 Quick Start....................................................................................5 Front Panel....................................................................................6 Back Panel.....................................................................................7 Functions......................................................
Mytek Stereo 192 Sample Rate Converter – User Manual Introduction The Mytek Stereo 192 Sample Rate Converter is a hardware SRC that is capable of synchronous and asynchronous operation. It can convert between any frequency between 32,000 Hz and 192,000 Hz with 1 Hz accuracy. The Stereo 192 SRC accepts AES/EBU, S/PDIF, and Toslink input, and has AES/EBU and S/PDIF (coax only) output. There are also Wordclock In and Out connections. www.mytekdigital.
Mytek Stereo 192 Sample Rate Converter – User Manual Quick Start 1. Connect Digital Input and Output Connect the output of your digital device to an input on the SRC. Select this input on the front panel with the “IN” button. A solid LED will tell you that the source is valid. Connect the digital output of the SRC to the digital receiving device. 2. Operation You can choose to display either the input frequency or the output frequency by pressing the “F-DISP” button.
Mytek Stereo 192 Sample Rate Converter – User Manual Front Panel AS YNCHRONOUS AND S YNCHRONOUS S RC STEREO192SRC MYTEK DIGITAL.
Mytek Stereo 192 Sample Rate Converter – User Manual Back Panel 110/220VAC AES OUT AES IN B WCK IN S PDIF IN TOS LINK IN A C WCK O UT G D E SWITCH AND FUSE INSIDE DESIGNED IN USA F WWW.MYTEKDIGITAL.CO M S PDIF OUT H A – IEC Power socket B – Wordclock BNC Input C – Wordclock BNC Output D – AES/EBU XLR Input E – S/PDIF Coax Input F – S/PDIF Optical Input (Toslink) G – AES/EBU XLR Output H – S/PDIF Coax Output Functions IN – You can select the active input by pressing this button.
Mytek Stereo 192 Sample Rate Converter – User Manual Frequency Selections There are 3 modes of frequency selection: Quick – pressing the UP button will cycle between • 44100 Hz • 48000 Hz • 88200 Hz • 96000 Hz • 176400 Hz • 192000 Hz • last user defined entry Additional Predefined – pressing SEL will bring up the available frequency subgroups. UP will cycle between: • STD (standard) • P. down (pull down) • P. up (pull up) Pressing SEL will select the subgroup.
Mytek Stereo 192 Sample Rate Converter – User Manual • P. up ◦ 44144 Hz ◦ 45937 Hz ◦ 48048 Hz ◦ 50000 Hz Once the desired frequency is selected push SEL to confirm. Custom Value – hold down SEL until the first digit starts flashing. Press UP to set the desired digit value. Press SEL to confirm the value and move on to the next digit. After the most significant digit is set the unit is now ready for operation. The minimum frequency that can be set is 32000 Hz. The maximum is 192000 Hz.
Mytek Stereo 192 Sample Rate Converter – User Manual Mode Selections The Stereo 192 SRC is capable of synchronous or asynchronous operation. Synchronous operation means that the output clock is locked to and following the input clock, even if it's a different frequency. This mode should be used when the actual length in time of the output sound clip has to be exactly the same (+/- 1 sample) as the original.
Mytek Stereo 192 Sample Rate Converter – User Manual Important Safety Instructions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Mytek Stereo 192 Sample Rate Converter – User Manual WARNING Excessive sound pressure from speakers and headphones can cause hearing loss. In order to use this product safely, avoid prolonged listening at excessive sound pressure levels. For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
