IMPORTANT NOTICE ■ Before operating the unit, please read these instructions carefully. ■ Retain the manual for future reference. ■ You are advised to follow the instructions carefully when operating the unit. ■ Do not use any chemical solvents, cleaning agents or corrosive detergents to clean dirt off the surface of the screen. By doing so, you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend using a soft, damp, lens cleaning cloth.
MAIN FEATURES ■ HEADREST 7.0” 16:9 WIDE SCREEN TFT-LCD MONITOR ■ BUILT IN DVD PLAYER ■ BUILT IN WIRELESS HEADPHONE IR TRANSMITTER ■ 1 AUDIO/VIDEO INPUT ■ FULL FUNCTION WIRELESS REMOTE CONTROL ■ (OSD) ON SCREEN DISPLAY FOR CONTROL OF PICTURE QUALITY AND FUNCTIONS ■ FULL BAND WIRELESS FM MODULATOR WITH 6 PRESETS MEMORY. MAIN SPECIFICATIONS ■ DISPLAY: 7.0" wide screen TFT LCD active matrix ■ RESOLUTION: 480 (W) X 234 (H) x 3 (R.G.B.) ■ DOT PITCH: 0.107mm (W) X 0.
DVD PLAYER Supports DVD, VCD, AUDIO CD, and MP3. MONITOR 7.0" wide screen TFT LCD active matrix STANDARD ACCESSORIES PACKAGE CONTENTS ■ Remote control (AAA x 2 batteries) ■ Operating manual ■ A/V input cable OPTIONAL ACCESSORIES Single Channel Wireless IR Headphones — AE21 Dual Channel Wireless IR Headphones — AE22 CONTROLS & CONNECTORS ■ POWER button - Press to turn the selected on/off. ■ SOURCE button - Press to toggle between desired sources.
REMOTE CONTROL OPERATION MONITOR FUNCTION DESCRIPTIONS DRIVER button PASSENGER button Press these buttons to select which monitor you would like to control with the remote control. POWER button Press this button to turn on the selected monitor, press again to turn off the monitor. SOURCE button Press SOURCE button to toggle between sources on the selected monitor. VOLUME UP button VOLUME DOWN button Use these buttons to raise and lower the volume level of the audio output.
DVD FUNCTION DESCRIPTIONS NUMBER buttons Direct access for CD tracks, DVD chapters, and password setting. PBC/MENU button Toggles available subtitles when playing VCD 2.0, or shortcut to DVD selection title menu. TITLE button Certain DVDs come with title selections. For such cases, the TITLE button allows the user to select desired title. SUBTITLE button Toggles the displayed subtitles if available on your selection. BACK button Allows the user to search in a backward direction.
MONITOR OPERATION Adjust the monitor to a comfortable viewing angle free from glare or bright ambient light. ● Press the POWER button on the unit or remote to turn on the monitor. ● Press the SOURCE button to select viewing source. ● Press the MENU button to activate the OSD menu shown on the LCD screen. ● Press the MENU button again to select the adjustment item, press the "+" or "- " button to adjust the desired function/value.
● The BRIGHTNESS adjustment controls the intensity of the backlight. ● The CONTRAST adjustment controls the black level ratio. ● The COLOR adjustment controls the balance of blue, yellow, ● The TINT adjustment controls the intensity of blue, yellow, and red. and red.
● The FM MOD selection toggles the FM modulator on and off. ● The FM CHANNEL selects FM frequency that your source will broadcasted on, Press < or > to change broadcast channel. ● The FM PRESETS toggles between 6 preset FM frequencies set for source broadcast, Press > to scroll stored presets. Hold < for 3 seconds to store desired preset. ● The RESET selection will return the unit to factory set defaults. Press UP to activate this function.
FM PRESET INSTRUCTIONS 1. Press the "MENU" button on the monitor or the "PIC MENU" button on the remote control. Continue pressing the button and scroll until "FM MOD" is button and scroll until "FM MOD" is displayed. Turn on the FM modulator by selecting "ON" by pressing the "UP" or < button. The FM modulator feature will only be available on the monitor with the media player in use. 2. Press the "MENU" or "PIC MENU" button until "FM CHANNEL" is displayed.
3. Press the "MENU" or "PIC MENU" button until "FM PRESETS" is displayed. Select the preset location you would like to save the desired channel at. Selecting the preset location is accomplished by pressing the > button on your remote control or pressing the "UP" button on the monitor. There are six preset locations available. The previous entry in that location will be overwritten. 4. To save the preset, press and hold the < button on your remote control or the "DOWN" button on the monitor for 3 seconds.
DVD OPERATING The DVD player has the ability to play DVD, VCD, Audio CD, and MP3 audio. Make sure you read this section completely before using the DVD section. REGIONAL CODING Both the DVD player and DVD disc are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. This DVD player will only play region 1(North America) DVD discs.
General setting Press [SETUP]. The screen will display the system setting menu. To navigate the menu, use [ § ]/[ © ] the buttons. To confirm your selection, press [ENTER]. In the sub-menus, use the [ ¶ ]/[ Ä ] buttons to make your selection, press [ENTER] to enter the item to be changed. To navgate up and down use the [ ¶ ]/[ Ä ] buttons. Highlight your selection and press [ENTER] as conformation. Press [ § ] to escape the sub-menu and make another selection, or press [SETUP] to exit the SETUP menu.
Press [SETUP] to exit system setting. Note:three screen ratio modes are available (16:9 WIDE, 4:3PS, 4:3L) It enables user to select the disc to match your screen. Below is chart showing the various formats. The recommended setting is wide. Last Memory Function The DVD player can identify the last format of the disc being used to store the last frame shown in its memory prior to unit being powered off. This unique function, memorizes the point at which the disc was stopped.
Setup Brightness and Contrast Press [SETUP] to access the menu. The screen will display the system setting menu. Navigate to the video setup page and press [ENTER]. Use the [ Ä ] button to move the yellow band to "Quality" item. Press [ENTER] to confirm the screen will display as below: Navigate the yellow band to the item you want to change. Press [ENTER] to select the sub-menu. Use the [ Ä ] button to highlight your change. Press [ENTER] to select. Press [SETUP] to exit system setting.
How to handle discs How to hold disc Do not touch the face containing information. When there are stains on face of disc Wipe gently with a wet cloth and then with dry one. When a disc is brought in from a cold environment to hot, condensation may form on the face of the disc. Wipe down with a soft, smooth, dry cloth before using. Attention: ● Don't write on the labeled side. ● Don't use pickup cleaning preparation.
LIMITED ONE-YEAR WARRANTY (NON-TRANSFERABLE) Myron & Davis warrants to the original purchaser a non-transferable warranty to repair or replace, free of charge, the video product(s) in materials and workmanship under normal use and conditions for a period of one (1) year from date of purchase. Limited warranty excludes: ■ Labor cost for removal, reinstallation, and trouble shooting of the video product(s). ■ Damage to DVD discs, CDs, videotapes, accessories, or vehicle electrical parts.