User Manual

1
Contents
INTRODUCTION..........................................................
INSTALLATION OF THE DETECTION LOOP.................
2.1 Positioning.........................................................
2.2 Installation of the detection loop.........................
2.3 Testing the detection loop installation..................
INSTALLATION/OPERATION COMMUNICATOR
3.1 Installation of the communicator..........................
3.2 Charging instructions..........................................
3.3 Led indication....................................................
3.4 Sleep mode.......................................................
3.5 Cleaning instructions..........................................
Appendices
APPENDIX A - USEFUL TOOLS/PARTS/EQUIPMENT............
APPENDIX B - TECHNICAL SPECIFICATIONS......................
APPENDIX C - CE AND FCC REGULATIONS.........................
GUARANTEES & WARRANTIES..........................................
Figures
Figure 1.1 System overview...............................................
Figure 2.1 Detection loop installation overview....................
Figure 2.2 Soldering the loop wire end...............................
Figure 3.1 Communicator placement.....................................
Figure 3.2 Fastening the communicator in the holder..............
Figure 3.3 Charging cradle................................................
Figure 3.4 Led indication...................................................
3
4
4
6
8
10
10
12
12
13
14
15
16
17
18
3
4
6
10
11
12
13