User's Manual

■ Line-in function:

Switch to the AUX IN mode, the blue status indicator will turn on.

Connect Bluetooth speaker and the music devise with the included Micro USB to USB and 3.5mm

splitter cable.

■ Bluetooth Instruction(Note: The device is B19, pair code: 0000)

1 Making switch to BT mode to make it discoverable and ready for pairing.

The status indicator blinks blue.

2 On your Bluetooth device, turn on Bluetooth and scan for devices in the Bluetooth menu.

3. Select”B19” when it appears on device list. (If a pass code is requested, enter 0000). The blue

status indicator stops blinking once pairing is established and is ready for use.

■ Troubleshooting

1. No connection between Bluetooth speaker and Bluetooth device

Make sure the battery is fully charged

Make sure the Bluetooth speaker is functioning in the BT mode

Make sure your Bluetooth device is discoverable

Make sure your device supports Bluetooth Advance Audio Distribution

Make sure both device are within reception range

■ Charging Bluetooth speaker

1. Plug micro USB tip into the micro USB port on the back of the Bluetooth speaker

2. Plug USB tip into USB compatible wall charger or USB port of PC

3. During charging, the red status indicator turn on and it will becomes green when the Bluetooth

speaker is fully charged. Please disconnect the USB cable.

4. Fully charged time:2-3hours

5. Play time:6-10hours

■ Product’s Specifications

Heavy bass

Power output: RMS 3W

SNR: ≥90±2Db

Speakers: D45mm(150HZ-20KHZ)

Input Voltage: DC 5V/ 1A

Lithium polymar battery input: 1000mAh(DC5V)

Dimension: 61*61*54(mm)

Material: ABS shell

Weight: 133g

PAGE 1
■ Line-in function: Switch to the AUX IN mode, the blue status indicator will turn on. Connect Bluetooth speaker and the music devise with the included Micro USB to USB and 3.5mm splitter cable. ■ Bluetooth Instruction(Note: The device is B19, pair code: 0000) 1 Making switch to BT mode to make it discoverable and ready for pairing. The status indicator blinks blue. 2 On your Bluetooth device, turn on Bluetooth and scan for devices in the Bluetooth menu. 3. Select”B19” when it appears on device list.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.