Installation Guide

Instructions
1. Prepare the  replace location by establishing a
level surface about 45” x 45”.
3. Transfer the second layer. Note the 11-inch side of
the corner block will now be over the 6.5” side of the
corner block beneath.
4. Transfer the third layer.
5. Fill the inside of the  re pit with gravel or base
rock a minimum 2 inches deep.
Size: Outside Diameter: 39"x 39"
Inside Diameter: 23"x23"
Piece Count: 12" Caps: 24
Corner Units: 12
Fire pits should only be built over a non-combustible
surface like concrete patios or a compacted gravel base.
Never install a  re pit over a wood deck.
2. Transfer the top layer of the  replace to desired
location. This will become the bottom layer of the
 re pit. Note: Transferring one layer at a time be-
fore the next layer will help maintain the proper
orientation of the corner pieces.
MUTUAL MATERIALS INSTALLATION INSTRUCTIONS Mutual Fire Pit Kits
Mutual Square 39" Fire Pit