SD / HD Video Routing Matrix and Distributor MUTEC part no.
SAFETY INSTRUCTIONS General instructions To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture, direct sunlight or excessive heat from sources such as radiators or spotlights. No user serviceable parts are inside. Repair and maintenance must be carried out by qualified personnel authorized by MUTEC GmbH! The unit has been designed for operation in a standard domestic environment.
CONTENT INTRODUCTION General Function Description Features . . . . . . . . . . . . Applications. . . . . . . . . . Peripheral Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 8 8 8 CONTROL ELEMENTS MC-5 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . 9 MC-5 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . 10 INSTALLATION Content of the Box . . . . . . . . .
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INTRODUCTION Thank you for purchasing the MC-5, SD/HD Video Routing Matrix and Distributor, from MUTEC GmbH. Please keep this manual for future reference! General Function Description The MC-5 is an extremely high-flexible routing matrix and distributor for standard definition (SD) bi-level and high definition (HD) tri-level video signals.
INTRODUCTION \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Features Routing matrix and signal distribution functionalities in one box Compatible to HD tri-level and SD bi-level PAL, NTSC, SECAM Accepts four independent video input signals simultaneously Built-in 4-way preset management Distributes HD test pattern component signals All adjustments are retained after power-down. Simple, new user interface. Built-in international power supply.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CONTROL ELEMENTS MC-5 Front Panel 1 2 3 4 5 1 POWER This red LED lights up when the unit is switched on with the rear panel POWER switch (on condition that the adjusted voltage matches your local voltage). 2 MENU Use this key to access the different function menus. 3 SELECT Use this key to select a function from a specific function menu.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INSTALLATION Content of the Box The unit was packed carefully. Nevertheless we recommend to check the content directly after opening the package: 1 x MC-5 1 x Power cable 1 x Manual 4 x Rubber feets 1 x Registration card The condition of the packaging material and the device should be checked carefully additionally.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GENERAL OPERATION Selecting Function Menus and setting Functions Operating the MC-5 is very simple! The device is fully operated using the 2 keys at the front panel. 1 Switching the MENU key toggles between different basic function menus. 2 Switching the SELECT key activtes individual functions within one function menu. 1. MENU selects individual function menus. 2.
O P E RAT I O N \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OPERATING THE MC-5 PRESET This menu enables you to set and to store four different set-ups of output configurations. Its operation is very easy. Choose one of the four presets (SET1 – 4) by pressing the SELECT button repeatedly. When the desired preset is selected, define your output configuration by setting the corresponding LEDs in the ROUTING MATRIX OUTPUT menu (see below).
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> APPENDIX Pin Assignment of the Connectors Mains 3 2 1 1 2 3 Neutral (blue; USA: white) Protective earth (green/yellow; USA: green) Live, phase (brown; USA: black) SD/HD Video BNC Input and Output 1 2 1 2 Signal Ground > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88 15
AP P E N D I X \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Technical Data SD/HD VIDEO IN 1 – 4 Interface 4 x BNC female, unbalanced input impedance 75 Ω Input Level Range 0.2 – 5.0 V (p-p) Video Input Formats SD bi-level (PAL / SECAM + NTSC), HD tri-level, all video standard and frame rate combinations SD/HD VIDEO OUT 1 – 12 Interface 12 x BNC female, unbalanced, output impedance 75Ω, individually buffered Output Level 0.2 – 5.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ALL SOFTWARE AND HARDWARE PRODUCT NAMES ARE REGISTERED TRADEMARKS OF THEIR RESPECTIVE OWNERS. WE RESERVE THE RIGHT TO CHANGE TECHNICAL DETAILS WITHOUT PRIOR NOTICE. ©MUTEC GmbH 2002 •7045-014 WWW.MUTEC-NET.