Digital Audio + SD / HD Video Sync Master Clock Generator V1.4 MUTEC no. 8015-067 MUTEC partpart no.
SAFETY INSTRUCTIONS General instructions To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture, direct sunlight or excessive heat from sources such as radiators or spotlights. No user serviceable parts are inside. Repair and maintenance must be carried out by qualified personnel authorized by MUTEC GmbH! The unit has been designed for operation in a standard domestic environment.
CONTENT introduction General Function Description. . . . . . . . . . . . . . . . . . 7 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Peripheral Products. . . . . . . . . . . . . . . . . . . . . . . .8 CONTROL elementS MC-3.2 SMART CLOCK HD Front Panel. . . . . . . . . . . . .9 MC-3.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INTRODUCTION Thank you for purchasing a MC-3.2 SMART CLOCK HD, Digital Audio & SD/HD Video Sync Master Clock Generator from MUTEC GmbH. Please keep this manual for future reference! General Function Description MC-3.2 SMART CLOCK HD is a unique, extremely high-flexible audio and video sync reference clock generator.
INTRODUCTION \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Features Three independent reference clock generators in one box. Generation of SD bi-level video sync and HD tri-level video reference sync signals with different frames rates simultaneously. Audio and video signals coupled to one common AES11, Grade 1, basis clock. Generation of 7 Ultra low-jitter basis Word Clock rates up to 192.0kHz.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CONTROL elements MC-3.2 SMART CLOCK HD Front Panel 1 2 3 4 5 5 6 7 8 9 1 POWER This red LED lights up when the unit is switched on with the rear panel POWER switch (on condition that the adjusted voltage matches your local voltage). 2 MENU Use this key to access the different functional menus. 3 SELECT Use this key to select a function from a specific functional menu.
CONTROL ELEMENTS \\\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> MC-3.2 SMART CLOCK HD Rear Panel 1 Refer to the »Technical Data« section in the APPENDIX for a full list of all available SD and HD video format and frame rate combinations. Refer to the »Generatable Word Clock Frequencies« and »Generatable AES/EBU and S/PDIF Frequencies« sections in the APPENDIX for a full list of all Word Clock, AES/EBU and S/PDIF clock rates that can be generated.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INSTALLATION Content of the Box The unit was packed carefully. Nevertheless we recommend to check the content directly after opening the package: 1 x MC-3.2 SMART CLOCK HD 1 x Power cable 1 x Manual 4 x Rubber feets 1 x Registration card The condition of the packaging material and the device should be checked carefully additionally.
I N S TALLAT I O N \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wiring the AES/EBU and S/PDIF Interfaces Since some manufacturers offer optimized cables for the transmission of digital S/PDIF and AES/EBU audio signals, it will be a good idea to ask your retailer for specific cables. Especially when working with high AES/EBU clock rates well shielded clock lines are imperative to avoid increased radiation! Standard cables are normally useable for clock rates up to 50.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GENERAL OPERATION Selecting Function Menus and setting Functions Operating the MC-3.2 SMART CLOCK HD is very simple! The device is fully operated using the 2 keys at the front panel. 1 Switching the MENU key toggles between different basic function menus. 2 Switching the SELECT key activtes individual functions within one function menu. 2. SELECT selects individual functions within one function area. 1.
O P E RAT I O N \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SD + HD VIDEO settings SD VIDEO This menu enables you to set the internal standard definition (SD) video sync reference generator to different standards. It is a multifunctional menu which means, the two LED rows indicate together the different possible settings. The adjusted video standard is transfered to both SD video sync outputs at the rear. The names of the LEDs in this menu: PAL: PAL SL: NTSC: – 0.
O P E RAT I O N \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> HD VIDEO + HD FPS This menu enables you to set the internal HD tri-level (HD) video sync reference generator to different standards. It is a multifunctional menu which means, the two LED rows ‘HD VIDEO’ and ‘HD FPS’ indicate together the different possible settings. The selected video standard is transfered to both HD video sync outputs at the rear. The names of the LEDs in this menu: 720p: 1080i: 1080p: – 0.
ANHANG \\\\\\\\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 720 p 24 1080 i 25 1080 p 30 – 0.1% HD VIDEO x2 HD FPS 720 p 24 1080 i 25 1080 p 30 – 0.1% HD VIDEO x2 24 1080 i 25 1080 p 30 HD VIDEO x2 24 1080 i 25 1080 p 30 HD VIDEO x2 24 1080 i 25 1080 p 30 HD VIDEO This setting outputs a 1080 lines progressive HD tri-level reference signal with 59.94fps. HD FPS 720 p – 0.
ANHANG \\\\\\\\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AUDIO CLOCK settings CLK BASIS Within this function menu you may select the required basis clock frequency for your studio set-up. This selection serves as the basic setting for all WCLK output pairs as well as the AES/EBU and S/PDIF outputs. There are 7 different basis clock rates adjustable by pressing the SELECT key for different times. The LEDs display the selected clock rate as follows: 32.0kHz 44.
ANHANG \\\\\\\\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WCLK multiplier 5 For the AES/EBU output pair are 3 multiply functions available: x 1, x 2, x 4 Due to the maximum possible AES/EBU clock frequency of 192.0kHz, the functions of these multipliers are dependent on the adjusted basis clock. Example 1 The basis clock runs at 32.0kHz, 44.1kHz or 48.0kHz: x 1: x 2: x 4: AES/EBU outputs run at 32.0kHz, 44.1kHz or 48.0kHz AES/EBU outputs run at 64.0kHz, 88.2kHz or 96.
\B E D I E N E L E M E N T E >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> APPENDIX Pin Assignment of the Connectors Mains 3 2 1 1 2 3 Neutral (blue; USA: white) Protective earth (green/yellow; USA: green) Live, phase (brown; USA: black) Word Clock + SD Video BNC Output 1 2 1 2 Signal Ground AES/EBU XLR Output 1 2 3 1 2 3 Ground a conductor (hot / +) b conductor (cold / -) S/PDIF Cinch Output S/PDIF Optical Output TOSLINK Standard 1 1 2 1 2 Audio signal Audio ground
AP P E N D I X \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Technical Data word clock sync output 1 – 4 Interface 8 x BNC female, unbalanced, individually buffered, adjustable in pairs Output Levels 3.5 V (p-p) @ 75 Ω, output impedance 22 Ω AES/EBU SYNC OUTPUT 5 Interface 2 x XLR male, transformer balanced, 3.
AP P E N D I X \\\\\\\\\\\\ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Generatable Word Clock (WCLK) Frequencies WCLK BASIS x1 x2 x4 32.0 kHz 32.0 kHz 64.0 kHz 128.0 kHz x 256 – 44.1 kHz 44.1 kHz 88.2 kHz 176.4 kHz 11.2896 MHz 48.0 kHz 48.0 kHz 96.0 kHz 192.0 kHz 12.2880 MHz 88.2 kHz 88.2 kHz 176.4 kHz 352.8 kHz – 96.0 kHz 96.0 kHz 192.0 kHz 384.0 kHz – 176.4 kHz 176.4 kHz 352.8 kHz 705.6 kHz – 192.0 kHz 192.0 kHz 384.0 kHz 768.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ALL SOFTWARE AND HARDWARE PRODUCT NAMES ARE REGISTERED TRADEMARKS OF THEIR RESPECTIVE OWNERS. WE RESERVE THE RIGHT TO CHANGE TECHNICAL DETAILS WITHOUT PRIOR NOTICE. ©MUTEC GmbH 2002 •7045-014 WWW.MUTEC-NET.
