Works with iScan Air Scanner App Wireless Scanner For mobile devices, and computers S400W All trademarks are the property of their respective owners and all rights are acknowledged. Wi-Fi® 802.11g/n Supported U s e r G uide A4 A4 A6 A6 A8 A8 POWER POWER Compatible with iOS, Mac OS X, Android OS, and Windows 8 V1.
Safety and Precautions • Never store the unit in hot, or very cold, or humid or dusty places. • For an extended storage period, we recommend storing the unit in a cool and dry place. • To help keep the scanning area clean, store the unit in a proper case when not in use. • If the unit is left in extreme cold or hot conditions, allow to adjust to normal room temperatures before use. • Only use accessories included with the unit.
Contents Safety and Precautions ...........................................2 Contents ....................................................................3 Supported Devices .................................................4 Unpack .......................................................................5 Scanner Parts ...........................................................6 Charge the Battery ...................................................7 Download and Install iScan Air .............................
Supported Devices Wireless Scanner is compatible with following devices: iPad (3rd generation), iPad 2, iPad, iPad mini with iOS 5.0 or later. iPhone 5, iPhone 4S, iPhone 4, iPod touch with iOS 5.0 or later. Android mobile devices (including tablets and smartphones) with OS 4.0 or later. Mac computers with OS X 10.7 or later. Windows 8 devices (including computers, tablets and smartphones).
Unpack Make sure following items are included.
Scanner Parts Wi-Fi LED Indicator Feed Slot A4 A4 Paper Guide Exit Slot Power LED Indicator A6 A6 A8 A8 POWER RESET POWER Reset Pin-hole (System Shutdown) POWER Button Mini USB Port (Charge Only) 6
Charge the Battery Wireless Scanner has a built-in rechargeable battery to provide power, make sure it has been fully charged before use. 1. * 2. A Press POWER button to turn Off the Scanner. The Power LED indicator shall turn off. Connect the USB cable to the Scanner at small end and to a computer ( A ) or to USB power adapter ( B ) at the other end. * 3. • • • • B The Power LED indicator shall emit red light to indicate the battery is charging.
Download and Install iScan Air Wireless Scanner includes free iScan Air apps to work on iPad, iPhone, iPod touch, Android mobile devices, Windows 8 devices, and Mac computers. You need to download and install iScan Air from Internet on your device before use. 8 1. From iPad, iPhone, and iPod touch App Store from your mobile Open the device. 2. Type ‘iScan Air’ in the search field. 3. Select iScan Air and follow on-screen instruction to download and install it to your device.
Download and Install iScan Air (Continued) From Mac computers Open the 2. Type ‘iScan Air’ in the search field. 3. Select iScan Air and follow on-screen instruction to download and install it to Mac. • • Search ‘iScan Air’ in the Mac’s App Store. App Store from your Mac. 1. iScan Air iScan Air NOTES Ensure that your device has Internet access via your service provider or wireless connection. Do not perform other activities on your device while downloading iScan Air app.
Download and Install iScan Air (Continued) From Windows 8 devices 1. Open the Windows Store from your devices. 2.
Connect via Wi-Fi Network Wireless Scanner incorporates Wi-Fi capabilities with soft AP (access point) function which enables to share it to multiple devices. Follow below steps to connect Wireless Scanner to your iPad, iPhone, iPod touch, Android mobile devices, Windows 8 devices, and Mac computers via an existing Wi-Fi network in your location. 1. ON - Press POWER 2 secs, the Power LED will emit a steady green light. OFF - Press POWER 4 secs, the Power LED will turn off.
Connect via Wi-Fi Network 4. (Continued) Now, Wireless Scanner has been connected to your device successfully and is ready for use. NOTES • • Connection and communication errors may occur during operations due to unexpected factors. If you encounter an error, restart Wireless Scanner and reconnect it via your device again. The signal strength, network traffic, network environments and other conditions may affect Wireless transmission performance.
Scan and Save NOTES Ensure Wi-Fi function is enabled on Wireless Scanner and connected to your device prior to use. From iPad, iPhone and iPod touch 1. Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s screen shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s photo library.
Scan and Save (Continued) From Android mobile devices Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s gallery. * 14 iScan Air on your device to open it. 1. If you want to scan it again press Cancel button and repeat the above steps.
Scan and Save (Continued) From Mac computers 1. Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Press the Scan button. The device’s shall show a real-time preview while scanning. 4. Press the Save button to bring up a 'Save as' dialog box, save the scan result with a chosen file name and directory, or press the Export to iPhoto to export it to the iPhoto.
Scan and Save (Continued) From Windows 8 devices 1. Press 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s gallery. TBD * 16 on your device to open it. If you want to scan it again press Cancel button and repeat the above steps.
Use the Photo Sleeve Use the Photo Sleeve when photos are fragile or small to avoid damage or jams, and get the best result. 1. Remove the plastic foil on the Sleeve, place the photo inside of it, insert the tongue into the slot at the open end. 2. Insert the sealed end of the Sleeve facing up into the Feed Slot, adjust the Paper Guide, then follow the 'Scan and Save' procedures to start scanning to a device. A4 A6 A8 P POWER The sealed end goes in first.
Calibrate If dark lines or stripes appeared on the scanned image, please perform the calibration of Wireless Scanner. NOTES • To get the best scan quality, perform the calibration periodically. • Make sure the Calibration Card is clean and free of dust before use. From iPad, iPhone and iPod touch 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Calibrate setting. 2. 3.
Calibrate (Continued) From Android mobile devices 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Calibrate setting. * 2. 3. If your Android device has a 'Menu' button press it to bring up the menu. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. Tap the Calibrate button.
Calibrate (Continued) From Mac computers 1. Press iScan Air app. Press the Settings at the top-left corner of the Mac's screen, select the Calibrate setting. 2. 3. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. Tap the Calibrate button. * The Calibration Card will be automatically pulled into Wireless Scanner, wait until the Card is ejected with a 'Calibration done.' message. Tap the OK button.
Calibrate (Continued) From Windows 8 devices 1. Press on your device to open it. 2. Press the XXX on the device. Tap XXX at the top-right corner of the app to bring up the menu, and then select the Calibrate setting. 3. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. 4. Tap the Calibrate button.
Clean Rollers Dirt and dust can build up inside Wireless Scanner and affect image quality, please clean Wireless Scanner periodically to get the best result. Use the Cleaning Board included with Wireless Scanner to clean rollers. 1. From iPad, iPhone and iPod touch Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Clean setting. 2. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button.
Clean Rollers (Continued) From Android mobile devices 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Clean setting. * 2. 3. If your Android device has a 'Menu' button press it to bring up the menu. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a 'Cleaning done' message.
Clean Rollers (Continued) From Mac computers 1. Press iScan Air app. Tap the Settings at the top-left corner of the device's screen, select the Clean setting. 2. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a 'Cleaning done.' message. Tap the OK button.
Clean Rollers (Continued) From Windows 8 devices 1. Press 2. Press the XXX on the device. Tap XXX at the top-right corner of the app to bring up the menu, and then select the Clean setting. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. 4. on your device to open it. TBD * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a success message.
Clean Lens Dirt and dust can build up inside Wireless Scanner and affect image quality, please clean Wireless Scanner periodically to get the best result. Please use the Cleaning Strip included with Wireless Scanner to clean the lens. 1. 2. 3. 4. 26 Turn off Wireless Scanner. Hold the Cleaning Strip with the sponge grip handle facing down. Insert the thinner end into the Exit Slot at the rear of Wireless Scanner. Move the Strip from side to side few times, then remove it.
Helpful Hints Scanner does not turn on. Check if the POWER button is pressed on. • Check if Wireless Scanner is charged. • Scanner cannot connect to a mobile device or computer. Check if the Wi-Fi signal strength is sufficient. Try moving closer to the Wi-Fi router or base station. • Make sure the Wi-Fi LED indicator of Wireless Scanner is flashing blue. • Check that the network settings on your device is matched to Wireless Scanner.
FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Specifications Scanner Type Image Sensor Light Source Scan Size (Max.) Scan Thickness Scan Resolution Scan Speed Interface File Format Power Power Consumption Battery Battery Capacity Scans per Charge Power Saving Charge Time Wi-Fi Capability Dimensions Weight Operating Conditions 28 A4 color sheetfed scanner Color CIS (Contact Image Sensor) LED (R, G, B) W 216mm x L 356 mm (W 8.5" x L 14") 0.08mm ~ 0.
