Quick Guide 82-156-00070 FR DE EN RU GR PL TU FI DK SW PT NL ES IT Stereo Headset and Audio Dongle
EN Model No.: MBT-A120 Model No.: MBT-S120 FCC ID: HWF-MBTA120 FCC ID: HWF-MBTS120 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Este símbolo presente no produto ou nas instruções significa que o seu equipamento eléctrico ou electrónico deve ser eliminado no fim da sua vida útil mas separadamente do lixo doméstico. Existem diferentes sistemas de recolha para reciclagem na EU. Para mais informações, contacte as entidades locais ou o vendedor junto do qual comprou o seu produto.
Model No.: MBT-A120 Model No.: MBT-S120 FCC ID: HWF-MBTA120 FCC ID: HWF-MBTS120 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
1 2 3 4 5 6 7 8 9 10 LED Indicator Power Switch Behind-the-neck Band DC-In Jack Microphone Talk/Pairing Button Volume Up Button LED Indicator Stop Button Volume Down Button Dongle 1 2 3 4 5 6 Strap Holder Audio-In Connector Power Switch DC-In Jack LED Indicator Pairing Button 6 7 8 9 10 1 2 3 4 5 1 2 4 5 6 3 Bluetooth Headset & Dongle User Guide 3 EN Identifying the Parts Headset
Preparation EN Charging Please charge the built-in battery for 5 hours before initial use. To Power Outlet Low battery When the battery is low, the LED indicator will flash red. Please charge the battery for approximately 3 hours. 1 Pr bu sli Note: 2 Do not use the headset or dongle while charging, and do not connect the AC Adapter while the headset or dongle is in use. Po th 3 Re fla th 4 Th wh pa Power on/off • Connect the split ends of the supplied AC adapter (5V/0.
arging, hile the off the ator EN dicator ttery Pairing Pairing the Headset and Dongle 1 Press and hold the TALK/PAIRING button on the headset and then slide the power switch to power it on. 2 Power on the dongle and then press the PAIRING button to start pairing. 3 Release the buttons when the LEDs flash red and blue alternatively. (Now they are in pairing mode.) 4 The LEDs flash blue once per second when the devices are successfully paired.
Using Your Dongle EN Listening to the Music Music Player (Example Only) Make sure the headset and dongle have been paired successfully before playing music. 1 Connect the dongle’s AUDIO-IN connector into a music player, walkman or CD player. 2 Power on the dongle, headset and music player. 3 Play the music player and the music will be heard on the headset. 4 To stop the music, press the PAIRING button on the dongle. 5 To play the music again, press the PAIRING button on the dongle.
1 2 3 4 5 6 7 Notes: 1) Your headset can save the pairing information of up to 8 phones, but connect to only one phone at a time. 2) The mobile phone may provide the function of changing the headset’s name. “MBT-S120“ can be replaced by the name that you prefer. Press TALK/PAIRING button Select MBT-S120 in the display Bluetooth Headphone & Dongle User Guide 7 EN Pairing Pairing the Headset and a Mobile Phone Press and hold the TALK/PAIRING button on the headset and then power on the headset.
Using Your Headset EN Using the Headset Make a Call Use the phone’s keypad to dial the phone number that you want to call. Answer a Call When receiving a call, you will hear a ring tone through the headset. Press the TALK/PAIRING button to answer the call. End a Call Press the STOP button on the headset or the end-call button on the mobile phone to end a call.
button oice ce dialthe Status Headset Left Ear LED EN on the nds to LED Indicators Dongle Pairing Flashes blue and red alternatively until the pairing is complete or time out (within 60 seconds) Connecting Flashes blue twice per second Connected (to mobile phone) Flashes blue once every 2 seconds (headset only) Connected Flashes blue once per second Idle (pairing fails) Flashes blue once every 3 seconds Battery low Flashes red Status Headset Right Ear LED Charging Light red Battery Ful