Specifications

USER GUIDE

VP130

Tube Phono Preamp

SPECIFICATIONS

I/ O Connectors: RCA, 1/4" TRS Stereo

Input Sensitivity: 30 dB gain @ 1kHz, 47k ohms Input Z

Input Impedance: 50k ohms

Output Impedance: 8 ohms Headphone, 100 ohms RCA

Max Output Level: >10dB @ 1kHz at .1% dist.

Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz

Rumble Filter: 20Hz

THD .02% @ 1KHz

S/N Ratio: >80 dB unweighted

PWR: 15 DC - 700mA

Size: 6"w x 2.5"h x 5.4"d

Weight: 2 lb

Indicator: 1 Power LED

Bellari is a division of Rolls Corporation

Salt Lake City, UT

03/08

WWW.ROLLS.COM

VERY IMPORTANT NOTES:

Occasionally with certain conﬁ gurations, you may experi-

ence excessive hum or buzz. In this case, try connecting the

Ground connection from your turntable directly to your re-

ceiver/ampliﬁ er, thus bypassing the VP130.

If you connect the output of the VP130, either the RCA or

headphone outs, without connecting a turntable to the input

- you will experience noise. The combination of the VP130

and the turntable (with its RIAA equalization curve) - com-

plete a crucial circuit for proper operation.

FOR WARRANTY INFORMATION SEE OUR WEB SITE

WWW.ROLLS.COM

PAGE 1
SPECIFICATIONS I/ O Connectors: Input Sensitivity: Input Impedance: Output Impedance: Max Output Level: Equalization: Rumble Filter: THD S/N Ratio: PWR: Size: Weight: Indicator: RCA, 1/4" TRS Stereo 30 dB gain @ 1kHz, 47k ohms Input Z 50k ohms 8 ohms Headphone, 100 ohms RCA >10dB @ 1kHz at .1% dist. RIAA +/- 1.5 dB, 20Hz to 20kHz 20Hz .02% @ 1KHz >80 dB unweighted 15 DC - 700mA 6"w x 2.5"h x 5.
PAGE 2
INTRODUCTION CONNECTION/OPERATION Thank you for your purchase of the Bellari VP130 Tube Phono Preamp. The VP130 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. INSPECTION Connect your turntable to the VP130 as shown.