ULM200M /ULM200D Controls ULM200M /ULM200D Controls 1. POWER/STATUS LED 1. ▼ VOLUME Button (Mute/volume down) 2. ▲ VOLUME Button (Power on/unmute/volume up) 3. USB connector 5. Wireless Link Status LED ULM200M /ULM200D Getting Started 1.Connect the ULM200D wireless receiver to the “WIRELESS ONLY!” USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. 2.
will power down 10 seconds after the ULM200D wireless receiver is unplugged. 7. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. 8. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the ▲ and ▼ buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver.
Group’s Limited Warranty, please see complete details online at music-group.com/warranty. FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible Party Name: MUSIC Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 ULTRALINK ULM200M/ULM202D complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.