User Manual

AIR LINK DW 20BR

Controls

(1) PAIR button – enables the unit to become available for pairing by pressing and

holding the button for 3 seconds. The LED ring will indicate the current status.

See the Getting Started section for details.

(2) LEVEL knob – adjusts the volume of the signal sent to the output jacks.

(3) DC INPUT – accepts the included power adapter.

(4) OUTPUTS – connect to an amp, powered speakers, or mixer via balanced XLR or

unbalanced ¼" TS cables.

Getting Started

1. Connect the DW 20BR to a mixer or speaker system with either XLR

or ¼" cables. Keep the volume on the speaker or mixer channel turned all

the way down to avoid popping noises.

2. Connect the power adapter to the DW 20BR and to a power outlet. The unit

will turn on automatically.

3. Activate Bluetooth connectivity on your Bluetooth device. The DW 20BR will

automatically try pair with the most recently connected device, in which case

you can start playing audio right away.

4. To connect a new device, press and hold the PAIR button for 3 seconds.

The LED ring will  ash quickly to indicate that it is ready to pair.

5. Select the DW 20BR from the list of available items in the Bluetooth settings

menu of your Bluetooth device.

Note - disable cellular reception when streaming audio from a cell phone.

6. Start playing audio from your Bluetooth device. Adjust the volume on the

Bluetooth device, then turn up the LEVEL knob so that the speaker or mixer

receives a strong signal.

7. Turn up the volume on your speaker, mixer, amps, etc. until you reach the

desired listening level.

Note - If your Bluetooth audio device is compatible, Play/Pause can be toggled

with a short press of the PAIR button on the DW 20BR while the bluetooth

stream is active.

(1) (2) (3) (4)

PAGE 1
AIR LINK DW 20BR Controls (1) (2) (3) (4) (1) PAIR button – enables the unit to become available for pairing by pressing and holding the button for 3 seconds. The LED ring will indicate the current status. See the Getting Started section for details. 3. Activate Bluetooth connectivity on your Bluetooth device. The DW 20BR will automatically try pair with the most recently connected device, in which case you can start playing audio right away.
PAGE 2
Specifications FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Outputs Connectors Balanced XLR, unbalanced ¼" Impedance 240 Ω Max. output level 4 dBu @ 1 kHz KLARK TEKNIK AIR LINK DW 20BR Bluetooth Frequency range 2402 - 2480 MHz Channel number 79 Bluetooth version 4.2 Receiver range Up to 30 m (100 ft) Output power Class 2, <10 dBm Supported codec SBC, aptX Supported profiles AVRCP 1.4, A2DP 1.