Mushi Pad Pro Manual
1 Preface This manual is aimed at operating the Smart Conference , guest sign-in Pad, and smart device control operation instructions for Mushi Pad Pro. Provide rational guidance and suggestions on behaviors such as conference room reservation, check-in, and inspection in smart office. Provides convenient guidance on the use and operation of this product.
1.1 Product performance 1.1.1 Product Specifications Product Name：Mushi Pad Pro 1.1.2 Equipment Working Environment Requirements Working temperature -10℃~45℃ Working humidity 10%~95% vapour-free Working air pressure 80kPa~106kPa Storing temperature -40℃~70℃ Storing humidity 10%~95% Storing air pressure 70kPa~106kPa 1.1.3 Processer CPU RAM RK3399，Dual-core A72，Clock speed 1.8GHz， quad-core A53，Clock speed 1.4GHz 4GB ROM 32GB 1.1.4 Screen Parameters Size 10.
1.1.6 Storage Device Hard disk interface SATA Hard disk capacity 32GB 1.1.7 Camera Parameters Pixel Front 500 million pixels Focusing method Fixed Distortion <2% Depth of field Fixed focus，depth of field more than 0.3~2.5m Angle of view 85° Aperture 2.4 Resolution Center1200，Sides 800 Pixel size 1600×1200 1.1.8 MIC Parameters Mount 2×digital MIC Sensitivity -38dbV~42dbV SNR ≥64dB AOP ≥130dB 1.1.9 Speaker Parameters Frequency response Bandwidth：550~15KHz 1.1.
Bluetooth Bluetooth 4.2 1.1.12 Structure and Size Installing methad Size（mm） Wall mounted: Wall fit, No screws on the front Table setting: 45°angle for desktop, supplied with Kensington lock L×W×H 245.5×155.3×19.
2 Scenario Description This product is mainly used in smart office scenarios such as conference room management, visitor management, and smart device management in the smart office process. This device can effectively improve the office efficiency of the above scenarios, reduce costs and increase efficiency, and improve the work efficiency of employees. 2.1Meeting room management usage scenarios 2.1.
2.1.2 Scenario Description 2.1.2.1 Check the meeting status Mushi Pad Pro has the function of quickly checking the status of the conference room. The status lights on both sides of the conference room can easily identify the current conference room status. Participants do not have to open the door of the conference room or observe through the glass, and can understand the state of the conference room only by observing from a distance.
Fig. 2.1- 2 Status of conference room in use When the conference room is in a meeting, the display screen of Mushi Pad Pro is shown in Figure 2.1-2. The status of the conference room is displayed as the word "in use" in red, and the function button is displayed as "End meeting". At this time, the conference room bound to the sign-in Pad is in the conference state, indicating that the conference room is occupied, and the information of the conference being opened is displayed above the function button.
2.1.2.2 Book an Instant Meeting Fig. 2.1- 3Book an Instant Meeting Tap the multifunction button to start an instant meeting of the selected duration. Instant meetings are available in 15, 30, 45 and 60 minutes. Participants and meeting names cannot be added to an instant meeting. After the booking is successful, the conference room changes to the state of "in use". The schedule will be updated synchronously for each terminal device. 2.1.2.
Fig. 2.1- 4 The interface of conference room check-in 2.1.2.4 End the conference in advance If the end time of the meeting is earlier than the scheduled time, after the meeting ends, you can tap the "function button" of Mushi Pad Pro. At this time, the operation interface is as shown in Figure 2.1-5. After touching “End Meeting”, a pop-up window will pop up to confirm the operation. Click the "Confirm" button to end the meeting schedule.
Fig. 2.1- 5 The interface of the “in use” 2.1.2.5 Check the Information of Conference The conference room sign-in pad can display the current conference room status, the available time of the current conference room, and the conference booking information in today (or the last 3 days or a week). At the same time, the main interface will also display information such as meeting room name, meeting room booking status, meeting room opening time, meeting room schedule timeline and company logo.
Fig. 2.1- 6 The main interface of the Conference Room Check-in Pad 2.2 Visitor Check-in Pad Usage Scenarios 2.2.1 Scenarios Using Background As more and more enterprises settle in modern smart buildings, some large and medium-sized enterprises also have independent buildings and parks, due to the gradual expansion of the business scope, the number of visitors is also increasing.
2.2.2 Scenario Description After the Mushi Pad Pro runs the Mushi visitor management system, it can realize the function of the visitor check-in board, which can register and manage the company visitor check-in, visitor check-out and temporary visitor visit, and realize the management of corporate visitor information in one machine. The main interface of the guest sign-in board contains five buttons and three display areas.
provide a better visit process for the visitor. 2.2.2.3 Visitor Check-out After the visit, the visitor clicks the visitor checkout button to enter the visitor checkout page. The visitor can check in by means of QR code, check-out code or face recognition. Fig. 2.2- 2 Visitor checkout interface (QR code) 2.2.2.
Fig. 2.2- 3 Temporary visitors fill in the information interface 2.3Smart Device Control System Usage Scenarios 2.3.1 Scenarios Using Background At present, the office environment of most workplaces is still in the traditional switch control. The overall structure of most conference rooms is relatively simple, and many conference room equipment is still in the state of traditional whiteboard projectors, and the actual use experience and reliability are at risk.
temperature, and equipment control can be realized, which can greatly improve the efficiency of conference equipment control. The main interface of the intelligent device control system includes two modules, three buttons and five display areas. The two modules include the conference mode switching module and the smart devices control module. The three buttons are the main switch, exit the program and the error reporting service.
or device details, and make further adjustments. Including secondary operations such as air conditioning temperature and air conditioning mode. Fig. 2.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
