Preliminary Specification Number :SP-ZZ1PJ-331-K W-LAN + Bluetooth Module Data Sheet Qualcomm Chipset for 802.11a/b/g/n/ac + Bluetooth 5.0 (Dual) Sample Part Number: LBEE5ZZ1PJ-TEMP MP Part Number: 1PJ Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 1 / 44 The revision history of the product specification Revised Revision Date Code May 4, 2018 May 17 A 2018 May 28, B 2018 July 6, 2018 C Revised Page - - Change Reason First release Updated Scope and Key feature Updated 13~19 Added the WLAN TX power range Added 3 3 4 8 8 8 10 14~19 20 21 12 13~16 20/23 23 24 31 10 12 16~17 13 28 -Added Manufacturing site -Added Weight info -Added Co planarity spec -Updated Storage Temperature range -Updated Ope
Preliminary Specification Number : SP-ZZ1PJ-331-K 2 / 44 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. SCOPE ..................................................................................................................................................... 3 KEY FEATURE ...................................................................................................................................... 3 Manufacturing site ........................................................................................
Preliminary Specification Number : SP-ZZ1PJ-331-K 3 / 44 1. SCOPE This specification is applied to the IEEE802.11a/b/g/n/ac W-LAN + Bluetooth 5.0 combo module. 2. KEY FEATURE - Chipset: QCA9377-3 - Size: 7.2 x 7.4 x 1.25 (max) mm - Weight: 0.15g/pc - PCB w/ shielded resin mold module - IEEE802.11a/b/g/n/ac dual band 2.4G/5G - Supports BT5.0 (Except Options) - SDIO 3.0 supporting SDR104 (WLAN), UART/PCM (Bluetooth) - Lead Free Module 3. Manufacturing site Company name: Shenzhen Murata Technology Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 4 / 44 7. Certification Information 7.1. Radio Certification USA/Canada FCC ID VPYLBEE5ZZ1PJ IC 772C-LBEE5ZZ1PJ *Please follow installation manual in Appendix Europe EN300 328 v2.1.1, Draft EN 300 328 v2.2.0, EN301 893 v2.1.1 and Final draft EN300 440 v2.2.1are prepared. 8. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS 8.1. Dimensions Table 1 Dimension (Unit: mm) Mark Dimension 7.40±0.20 L 0.30±0.10 a1 0.80±0.
Preliminary Specification Number : SP-ZZ1PJ-331-K 5 / 44 8.2. Pin Layout and PIN Descriptions Top View Table 2 Terminal Configurations Pin NO. Terminal Name Type VDDIO or pad voltage Connection to IC terminal Description 1 GND Ground - - Ground 2 VBUCK_GND_PM Ground - VBUCK_GND_PM Ground for internal 1.1 V regulator 3 PWM_PM O 1.1V PWM_PM SWREG PMU 1.1V output. 4 VDD11_PM I 1.1V VDD11_PM 1.1 V voltage feedback to SWREG PMU.
Preliminary Specification Number : SP-ZZ1PJ-331-K 6 / 44 26 3D_FRAME_SYNC I VDDIO_GPIO1 3D_FRAME_SYNC Frame sync signal from TV to sync with 3D 27 HCI_UART_RXD I VDDIO_GPIO1 HCI_UART_RXD UART RXD signal 28 HCI_UART_TXD O VDDIO_GPIO1 HCI_UART_TXD UART TXD signal 29 HCI_UART_RTS O VDDIO_GPIO1 HCI_UART_RTS UART RTS signal 30 HCI_UART_CTS I VDDIO_GPIO1 HCI_UART_CTS UART CTS signal 31 PCM_CLK I VDDIO_GPIO1 BT_I2S_SCK Bluetooth PCM_CLK signal 32 PCM_SYNC I/O VDDIO_GPIO1 BT_
Preliminary Specification Number : SP-ZZ1PJ-331-K 7 / 44 8.3. Marking A B C D Marking A B C D Meaning Pin 1 Marking Module Descriptor Inspection Number Murata Logo Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 8 / 44 9. ABSOLUTE MAXIMUM RATINGS*1) Parameter Storage Temperature VDD_3P3 VDDIO_SDIO VDDIO_GPIO1 Supply Voltage VDDIO_GPIO2 VDDIO_XTAL VDDIO_AO min. -40 -0.3 max. 85 3.65 Unit deg.C V -0.3 3.6 V *1) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
Preliminary Specification Number : SP-ZZ1PJ-331-K 9 / 44 11. External low–power 32.768 kHz clock The 32 kHz clock is used in low-power modes such as IEEE power-save and sleep. It serves as a timer to determine when to wake up to receive beacons in various power-save schemes and to maintain basic logic operations when in sleep. Type1PJ module does not require an external 32 kHz clock. By default, Type1PJ module utilizes its internal 200 kHz clock shared with the WLAN and BT subsystem.
Preliminary Specification Number : SP-ZZ1PJ-331-K 10 / 44 12. POWER SEQUENCE Timing 12.1. Case 1: 3.3 V power down after 1.8 V If the battery source can be removed from the end user device (battery removed, AC/DC plugged in), this is the recommended power sequence. It will avoid violating the power off sequence by allowing the 3.3 V rail to shut down after the 1.8 V rail. Notes: 1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.
Preliminary Specification Number : SP-ZZ1PJ-331-K 11 / 44 12.2. Case 2: 1.8 V power down after 3.3 V If the battery source cannot be removed from the end user device, this is the recommended power sequence for this application. This sequence allows the software to control the power on/off sequence. Notes: 1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.3 V upon host VIO voltage. 2. Both WLAN_EN and BT_EN of 1PJ are 1.8 V.
Preliminary Specification Number : SP-ZZ1PJ-331-K 12 / 44 12.3. Case 3: All power rails supplied with 3.3 V All power pins are connected to 3.3 V only include VDDIO_AO, VDDIO_XTAL, VDDIO_GPIOx. Notes: All host signals are either GND or floating before WLAN_EN/BT_EN =”high”, and after WLAN_EN/BT_EN = Low. Symbol Parameter Min Max Units tc1 90% of 3.3 V to 0.
Preliminary Specification Number : SP-ZZ1PJ-331-K 13 / 44 14. INTERFACE TIMING 14.1. Bluetooth UART Timing 14.1.1. UART transmit Timing tofftxd Parameter Description Min Typ Max Unit tofftxd Delay from CTS to TXD stop - - 8 byte 14.1.2. UART Receiver Timing toffrxd 14.2.
Preliminary Specification Number : SP-ZZ1PJ-331-K 14 / 44 14.2.1. I2S Transmitter Timing 14.2.2. I2S Receiver Timing Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 15 / 44 14.3. SDIO Timing 14.3.1.
Preliminary Specification Number : SP-ZZ1PJ-331-K 16 / 44 14.3.2.
Preliminary Specification Number : SP-ZZ1PJ-331-K 17 / 44 Symbol tCLK tCR, tCF Clock duty Min 4.8 30 Max 0.2*tCLK 70 Unit ns ns % Remark 208MHz (max.) between rising edge, VCT=0.975V tCR, tCF<0.96ns (max.) at 208MHz, C=10 pF b). Input timing Symbol tIS tIH Symbol tIS tIH Min 1.4 0.8 Min 3 0.8 Max Max - Unit ns ns Unit ns ns SDR104 mode C =10 pF, VCT=0.975V C=10 pF, VCT=0.975V SDR12, SDR25 and SDR50 modes C =10 pF, VCT=0.975V C=10 pF, VCT=0.975V c).
Preliminary Specification Number : SP-ZZ1PJ-331-K 18 / 44 15. DC / RF Characteristics 15.1. DC/RF Characteristics for IEEE802.11b - 2.4GHz Specification Mode Frequency Data rate IEEE802.11b DSSS / CCK 2412 to 2472 MHz 1, 2, 5.5, 11Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=19 dBm, 11Mbps mode unless otherwise specified. Items Contents - DC Characteristics min. typ. max. 1.
Preliminary Specification Number : SP-ZZ1PJ-331-K 19 / 44 15.2. DC/RF Characteristics for IEEE802.11g - 2.4GHz Specification Mode Frequency Data rate IEEE802.11g OFDM 2412 to 2472 MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=18 dBm, 54Mbps mode unless otherwise specified. Items Contents - DC Characteristics min. typ. max. 1.
Preliminary Specification Number : SP-ZZ1PJ-331-K 20 / 44 15.3. DC/RF Characteristics for IEEE802.11n – 2.4GHz Specification Mode Frequency Data rate IEEE802.11n OFDM 2412 to 2472 MHz MCS0-MCS7 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=18 dBm, BW=20MHz, MCS7 unless otherwise specified. - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 310 *8)*9) 2) Rx mode 60 - Tx Characteristics min. typ. max.
Preliminary Specification Number : SP-ZZ1PJ-331-K 21 / 44 15.4. Removed This section is removed. Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 22 / 44 15.5. DC/RF Characteristics for IEEE802.11a - 5GHz Specification Mode Frequency Data rate IEEE802.11a OFDM 5180 to 5825MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 14 dBm, 54Mbps unless otherwise specified. - DC Characteristics min. typ. max. 1.
Preliminary Specification Number : SP-ZZ1PJ-331-K 23 / 44 15.6. DC/RF Characteristics for IEEE802.11n - 5GHz Specification Mode Frequency Data rate IEEE802.11n OFDM 5180 to 5825MHz MCS0-MCS7 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 14 dBm, BW=20MHz ,MCS7 unless otherwise specified. - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 420 *8)*9) 2) Rx mode 80 - Tx Characteristics min. typ. max. 2.
Preliminary Specification Number : SP-ZZ1PJ-331-K 24 / 44 15.7. DC/RF Characteristics for IEEE802.11ac - 5GHz Specification Mode Frequency Data rate IEEE802.11ac OFDM 5210 to 5775MHz MCS0-MCS9 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 1 dBm, BW=80MHz ,MCS9 unless otherwise specified. - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 370 *8)*9) 2) Rx mode 90 - Tx Characteristics min. typ. max. 2.
Preliminary Specification Number : SP-ZZ1PJ-331-K 25 / 44 15.8. DC/RF Characteristics for Bluetooth Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Contents Bluetooth specification (power class) Version 2.1 + EDR (Class1) Channel frequency (spacing) 2402 to 2480 MHz (1MHz) Current Consumption Min. Typ. Max. (a) Tx=DH5 55 (b) Tx=2DH5 50 (c) Tx=3DH5 50 (d) Rx=DH5 22 (e) Rx=2DH5 22 (f) Rx=3DH5 22 Transmitter Min. Typ. Max.
(c) 2MHz (d) 3MHz Maximum Input Level (BER<0.1%) Preliminary Specification Number : SP-ZZ1PJ-331-K 26 / 44 -30 dB -40 dB -20 dBm *1: Up to three spurious responses within Bluetooth limits are allowed. *2: Up to five spurious responses within Bluetooth limits are allowed. 15.9. DC/RF Characteristics for Bluetooth (LE) Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Contents Bluetooth specification (power class) Version 4.
Preliminary Specification Number : SP-ZZ1PJ-331-K 27 / 44 16. LAND PATTERN (TOP VIEW) ***Stencil design: For 0.3×0.55mm electrodes, stencil pad is 0.24mm*0.44mm and should put in the center of the each conductor. For 0.8×0.8mm electrodes, stencil pad is 0.66mm*0.66mm and should put in the center of the each conductor. ***This is based on Murata’s condition using the thickness of the stencil 100 um. So this is just the recommendation and needs to modify based on your condition.
Preliminary Specification Number : SP-ZZ1PJ-331-K 28 / 44 17. REFERENCE CIRCUIT C6 L1 1.
Preliminary Specification Number : SP-ZZ1PJ-331-K 29 / 44 18. TAPE AND REEL PACKING (1) Dimensions of Tape (Plastic tape) Feeding direction Unit: mm W F T E P P0 16+/-0.2 7.5+/-0.1 0.3+/-0.05 1.75+/-0.1 12+/-0.1 4+/-0.1 P2 A0 B0 K0 D0 D1 W1 W2 25.5 +/-1.0 29.5 +/-1.0 2+/-0.1 7.8+/-0.1 7.6+/-0.1 1.25+/-0.1 1.5+0.1/-0 1.5+/-0.1 (2) Dimensions of Reel Unit: mm Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 30 / 44 (3) Taping Diagrams [1] Feeding Hole : [2] Hole for chip : [3] Cover tape : [4] Base tape : As specified in (1) As specified in (1) 62 um in thickness As specified in (1) [3] [1] [2] [3] [4] Feeding Hole Feeding Direction Chip (4) Leader and Tail tape Tail tape (No components) Components No components Leader tape (Cover tape alone) 160 to 190 mm 150mm min. 250 mm min.
Preliminary Specification Number : SP-ZZ1PJ-331-K 31 / 44 -The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. -The cover tape and base tape are not adhered at no components area for 250 mm min. -Tear off strength against pulling of cover tape: 5 N min. -Packaging unit: 1000 pcs/ reel - Material: Base tape: Plastic Reel : Plastic Cover tape, cavity tape and reel are made the anti-static processing. - Peeling of force: 1.1 N max.
Preliminary Specification Number : SP-ZZ1PJ-331-K 32 / 44 - Box Box for plastic bag: 90 x 350 x 350 mm Carton box: 390 x 380 x 380 mm 5 boxes for plastic bag are stored to a carton box as below. - Label Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 33 / 44 19. NOTICE 19.1. Storage Conditions: Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH. (Packing materials, in particular, may be deformed at the temperature over 40deg.C.) - The product left more than 6months after reception, it needs to be confirmed the solderbility before used.
Preliminary Specification Number : SP-ZZ1PJ-331-K 34 / 44 19.5. Soldering Conditions: The recommendation conditions of soldering are as in the following figure. When products are immersed in solvent after mounting, pay special attention to maintain the temperature difference within 100 °C. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 260 °C.
Preliminary Specification Number : SP-ZZ1PJ-331-K 35 / 44 static electricity or excessive voltage while assembling and measuring. 19.8. Input Power Capacity: Products shall be used in the input power capacity as specified in this specifications. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 36 / 44 20. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product.
Preliminary Specification Number : SP-ZZ1PJ-331-K 37 / 44 Appendix Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-331-K 38 / 44 LBEE5ZZ1PJ Installation Manual (FCC) FCC ID of this module is as follows; FCC ID: VPYLBEE5ZZ1PJ Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation Scan 802.11b/g/n-HT20 2412MHz – 2462MHz (ch1 – ch11) 802.11n-HT40 2422MHz – 2452MHz (ch3 – ch9) W52 802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48) 802.11n-HT40/ac-VHT-40 5190MHz – 5239MHz (ch38 – ch46) 802.11ac-VHT80 5210MHz (ch42) W53 802.
Preliminary Specification Number : SP-ZZ1PJ-331-K 39 / 44 2. Antenna ■Please refer to KDB 996369 ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna or antenna connector and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then.
Preliminary Specification Number : SP-ZZ1PJ-331-K 40 / 44 within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3-a) The use of an monopole PCB antenna with gain less than 2.
Preliminary Specification Number : SP-ZZ1PJ-331-K 41 / 44 LBEE5ZZ1PJ Installation Manual (IC) IC No. of this device is as follows; IC: 772C-LBEE5ZZ1PJ Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation Scan 802.11b/g/n-HT20 2412MHz – 2462MHz (ch1 – ch11) 802.11n-HT40 2422MHz – 2452MHz (ch3 – ch9) W52 802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48) 802.11n-HT40/ac-VHT-40 5190MHz – 5239MHz (ch38 – ch46) 802.11ac-VHT80 5210MHz (ch42) W53 802.
Preliminary Specification Number : SP-ZZ1PJ-331-K 42 / 44 2. Antenna ■Please refer to KDB 996369 ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna or an antenna connector and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then.
Preliminary Specification Number : SP-ZZ1PJ-331-K 43 / 44 ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Preliminary Specification Number : SP-ZZ1PJ-331-K 44 / 44 d'information à transmettre ou de défaillance. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product.