User Manual to FCC Murata Manufacturing Co.,Ltd. 1 1 murata.com Copyright © Murata Manufacturing Co., Ltd. All rights reserved. Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
LBEE6ZZ1PY User Manual Product Outline This product has a function as an IEEE802.11 a/b/g/n/ac + BT + BLE ・Product Size :20.9 x 14.8 x 2.6(max) [mm] ・RF-IC :Marvell 88W8987 (AEC-Q100 compliant) ・Reference Clock :38.
LBEE6ZZ1PY User Manual FCC ID: VPYLB1PY The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in User manual. ●Please describe the following warning on the final product which contains this module.
Notice ●The following statements must be described on the user manual of the host device of this module; FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip.
Notice ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. ●When installing it in a portable equipment. Please describe the following warning to the manual.
Notice This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.