User's Manual

ManualsBrandsMurata Manufacturing ManualsElectronicsCommunication Module

28 April 2016

1DX Installation Manual

FCC ID of this product is as follows.

FCC ID:VPYLB1DX

For OEM integration only – device cannot be sold to general public.

Therefore we will ask OEM to include the following statements required

by FCC on the product and in the Installation manual Notice.

Contents

1.Voltage

2.Antenna

3.Notice

Confidential

Summary of content (6 pages)

PAGE 1
Confidential 1DX Installation Manual FCC ID of this product is as follows. FCC ID:VPYLB1DX For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC on the product and in the Installation manual Notice. Contents 1.Voltage 2.Antenna 3.Notice Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
PAGE 2
Confidential 1.Supply Voltage min. typ. max. unit Specification Temperature Range -10 +25 +55 deg.C Specification Voltage VBAT 3.2 3.6 4.2 V VDDIO 1.71 1.8or3.3 3.63 V Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
PAGE 3
2.Antenna ■Please perform the antenna design that followed the specifications of the antenna. The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications. Confirm the same size as the Gerber file. ２）An antenna gain is lower than a gain given in antenna specifications. Measure the gain, and confirm the peak gain is less than the application value (1.4dBi) ３）The emission level is not getting worse.
PAGE 4
Confidential 3. Notice For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID:VPYLB1DX or Contains FCC ID:VPYLB1DX ●Please describe the following warning to the manual. This device complies with part 15 of the FCC Rules.
PAGE 5
Confidential 3. Notice ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. ●When installing it in a portable equipment.
PAGE 6
Confidential 3. Notice This device is intended only for OEM integrators under the following conditions: 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)The transmitter module may not be co-located with any other transmitter or antenna. 3)The use of an antenna with gain less than 1.4 dBi. As long as 3 conditions above are met, further transmitter test will not be required.