Preliminary Specification Number : SP-ABR-063-D WLAN Module Data Sheet MP P/N: CMWC1ZZABR Sample P/N: CMWC1ZZABR-TEMP PMN: CMWC1ZZABR Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd.
Preliminary Specification Number : SP-ABR-063-D Revision History Revision Code Draft Date Description 2015-4-27 A 2015-5-14 B 2015-6-10 C D 2015-12-30 2016-4-30 1. 2. 3. 4. 1. 2. 3.
Preliminary Specification Number : SP-ABR-063-D Contents 1. Scope ................................................................................................................................................. 1 2. Part Number / Part Composition ..................................................................................................... 1 3. Block Diagram ................................................................................................................................... 1 4.
Preliminary Specification Number: SP-ABR-063-D P. 1/14 1. Scope This product specification is applied to the IEEE802.11b/g/n WLAN module used for consumer applications. Module size Chipset Interface Reference Clock ROM Antenna Certification MSL RoHS : 22.0 x 19.0 x 2.
Preliminary Specification Number: SP-ABR-063-D P. 2/14 4. Construction, Dimensions, Marking and Terminal Configurations 4.1 Construction C Top view B I Bottom view L A D E W F G H J 4.2 Dimensions (in mm) Mark L W T Min. 21.8 18.8 - Typ. 22 19 2.4 4.3 Label Marking Mark A B C D E F G H I J Name Pin.1 indicator Murata logo Model Name / P/N FCC certification ID IC certification ID Inspection code Sub type number: 063 Version code: blank (Ver. 1.
Preliminary Specification Number: SP-ABR-063-D P. 3/14 4.4 Pin assignment (top view) 1 2 3 4 5 6 7 8 9 10 11 12 13 37 36 35 34 33 32 31 30 29 28 27 26 25 14 15 16 17 18 19 20 21 22 23 24 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd.
Preliminary Specification Number: SP-ABR-063-D P. 4/14 4.5 Recommended land pattern Antenna area Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd.
Preliminary Specification Number: SP-ABR-063-D P. 5/14 4.6 Pin description No. Name Function I/O MW300 Pin No. MW300 Pin Function 1 GPIO_16 CON[5]: Configuration Bit I/O 30 GPIO_16 2 RESET_N Module Reset (active low) I 35 RESETn 3 GPIO_22 NC 36 GPIO_22 4 GPIO_23 Functional Button Pin (optional) 37 GPIO_23 5 GPIO_24 NC 38 GPIO_24 6 GND 7 GPIO_25 32.768 kHz Crystal Input / Oscillator Input I 39 GPIO_25 8 GPIO_26 32.
Preliminary Specification Number: SP-ABR-063-D P. 6/14 4.7 Configuration pins This table shows the pins used as configuration inputs to set parameters following a reset. The definition of these pins changes immediately after reset to their usual function. To set a configuration bit to 0, attach a 100kohm resistor from the pin to ground. No external circuitry is required to set a configuration bit to 1.
Preliminary Specification Number: SP-ABR-063-D P. 7/14 7. RF Characteristics for IEEE802.11 Conditions: 25℃, VDD33= 3.3V Items Tx Power Level 802.11b (11Mbps) 802.11g (54Mbps) 802.11n (HT20) Rx Minimum Input Level Sensitivity 802.11b (11Mbps) 802.11g (54Mbps) 802.11n (HT20) Min. Min. - Contents Power Levels Typ. Max. 17 15 14 Typ. Max. -76 -65 -64 Units dBm dBm dBm Units dBm dBm dBm *Test performed through Murata RF switch connector P/N: MM8030-2610. 8. Power Up Sequence 9.
Preliminary Specification Number: SP-ABR-063-D P. 8/14 9.2 Clock Specifications (optional) 9.2.1 RC32K Specifications Parameter Frequency before calibration Startup time After-calibration frequency accuracy Temperature tolerance Duty cycle 9.2.2 Condition Use 32.768kHz crystal as reference clock - Min. 18.6 - Typ. 31.8 0.9 Max. 39.8 - Units kHz ms 32.3 32.7 33.1 kHz 40 65 50 60 ppm/C % Min. -40 Typ. 32.768 50 12.5 - Max.
Preliminary Specification Number: SP-ABR-063-D P. 9/14 11. PCB Antenna Layout Guidance If to use internal PCB antenna, some guides must be followed in order to get best antenna performance. (1) Place the antenna area on the corner or edge of the main board. (2) No ground, circuit, component under the antenna area, including the reverse side of PCB. No ground area is as large as possible. (3) Metal component should be at least 10mm away from PCB antenna.
Preliminary Specification Number: SP-ABR-063-D P. 10/14 12. Package This module product is packaged in tray. 1 tray: 45pcs products 1 inner box: 6 trays with products 1 outer box: 4 inner boxes MOQ: 1080pcs Inner 撪憰敔box Outter 奜憰敔 box Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd.
Preliminary Specification Number: SP-ABR-063-D P. 11/14 NOTICE 1. Storage Conditions Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35 °C and humidity from 20 ~ 70 %RH. (Packing materials, in particular, may be deformed at the temperature over 40 °C) - The product left more than 6months after reception, it needs to be confirmed the solderability before used.
Preliminary Specification Number: SP-ABR-063-D P. 12/14 Reflow soldering standard conditions (Example) Within 3 s 240 ~ 250 °C 220 °C Cooling down Slowly 180 °C 150 °C Pre-heating Within 120 s time(s) Within 60 s Please use the reflow within 2 times. Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 6. Cleaning : Since this Product is Moisture Sensitive, any cleaning is not permitted. 7.
Preliminary Specification Number: SP-ABR-063-D P. 13/14 - Aircraft equipment. - Aerospace equipment. - Undersea equipment. - Medical equipment. - Transportation equipment (vehicles, trains, ships, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. - Data-processing equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. 10.
Preliminary Specification Number: SP-ABR-063-D P. 14/14 must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence.
Preliminary Specification Number: SP-ABR-063-D P. 15/14 CAUTION PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product.
Preliminary Specification Number: SP-ABR-063-D P. 16/14 on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples.