WIT2411 2.4GHz Spread Spectrum Wireless Industrial Transceiver Integration Guide (PRELIMINARY) October 18, 2001 5375 Oakbrook Parkway Norcross, Georgia 30093 www.cirronet.
Note: This unit has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Notice to WIT2411 users/installers using the following fixed antenna: Mobile Mark 9dBi Corner Reflector The field strength radiated by this antenna, when connected to a transmitting WIT2411 module, may exceed FCC mandated RF exposure limits. FCC rules require professional installation of this antenna in such a way that the general public will not be closer than 2 m from the radiating aperture this antenna.
Declaration of Conformity We, Cirronetï›› Incorporated 5375 Oakbrook Parkway Norcross, Georgia 30093 USA declare under our sole responsibility that the product, WIT2411 To which this declaration relates is in conformity with the following standards or other normative documents: ETS 300 328 (November 1996) ETS 300 826 EN60950 following the provisions of the R&TTE Directive. Norcross, Georgia Timothy D.
Use Within the European Union The WIT2411 is intended for use within the following European Community States: Austria, Belgium, Denmark, Finland France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden and the United Kingdom The WIT2411 is also intended for use in the following non-European Union States: Iceland, Norway, Switzerland Use of the WIT2411 in France When used in France, the WIT2411 can only be operated with the France hopping pattern selected.