Multitone Electronics plc EkoTek Pager Quick Guide www.multitone.
EU Declaration of Conformity In Accordance With Article 6.3 of the EU Radio & Telecommunication Terminal Equipment R & TTE Directive 99/5/EC. As the manufacturer, we declare under our sole responsibility that the EKOPAG equipment conforms to all the applicable essential requirements of the EU Directive 99/5/EC, in accordance with the procedures of Annex II of the Directive and the following technical standards:ETSI EN 300 328 (Directive article 3.
EkoTek Pager Buttons (from left to right): Navigation keys: left arrow, down arrow, right arrow. Blue button: assist alarm. Red button: emergency alarm. Turning on the device • To switch the device on for the first time, place the unit in the charger and charge for a minimum of 12 hours. • Alternatively, press and hold the ◄ to turn on, after a power off. Charging the Battery • The pager is fitted with a AAA Ni-MH rechargeable battery.
Display Status Icons The following icons are displayed in the top right corner of the display as status indicators: Battery charge: Plugged in to power source: Audible alert: vibrate alert: Shift mode: day shift: night shift: Screen display 11:34 AM 12.03.07 Paul Smith Training Room 9261-9210 EkoTek-Pager/QUG/Iss. 7 Name / Message status Current Location If box is empty known location.
Raising and clearing alarms • • • • When an alarm is raised a text message is sent to configured group of pagers. The text includes the raising device’s identity, the alarm type that has been activated and the current location of the device. On clearance of an alarm, a text message is sent with the device’s identity stating the alarm has been cleared.
Man-down alarm (if enabled) • • • • If unit is tilted more than 45 degrees for longer than the configured trigger period, then it goes into pre-alert mode. The unit will beep prior to sending the alarm; to prevent the automatic man-down alarm being sent, return the unit to the upright position. The alarm is sent out to the pagers/users configured by the administrator. To clear alarm, return to upright position and use the ◄ button to clear the alarm.
Receiving Messages Receiving a message • • The new message will display on the pager screen. Message actions: o Select the ▼ button to see the available responses (accept and reject or delete). o Use the▼ button to scroll to the desired option . o Select the X button to send the response or delete the message. o Accept responses will be sent to the user that raised the alarm, to show that help is on its way.
Status Indicators Low battery status alarm (if enabled) • This alarm occurs when the battery reaches less than 25% charge. • The notification is either an audible or vibrate alert (dependent on profile settings). • The message ‘re-charge battery’ will also appear on the pager screen. Out of network range alarm (if enabled) • This alarm occurs when the pager is out of range of the EkoTek mesh network.
Menu Navigation From the stand-by screen: Press and hold the ▼ button to enter the main menu: Z Profile Power Off Advanced Profile Use the ▼ button to scroll to Profile. Press the ► button to select this option. Profile ► Custom When selected, use the ▼ button to navigate between: • Custom – Allows individual settings of various options such as backlight, audio and vibrate alerts and whether messages are displayed when pager is in charger.
3. Advanced • • • Z Use the ▼ button to scroll to Advanced. Press ► to select the option. Use the ▼ button to scroll to the desired option: Display Power save Custom profile* Hide clear info Off Off *if custom profile selected, otherwise this option will be blank. a) Display • To select, press ► from the Advanced menu options.
b) Powersave – from the main menu The powersave option blanks the screen after a set period, to save power. Use the ▼ to scroll to the powersave option. See 3.a) for how to navigate and select options. Display Power save Custom profile Hide clear info Z On Off c) Custom Profile • Use the ▼ button to scroll to Custom profile. Display Power save Custom profile Hide clear info Z • Z Off Press ► to select this option, where upon the following options are displayed.
d) Hide Clear Info • The ‘clear alarm’ instruction can be displayed on the screen to show users how to clear a raised alarm. • To hide this information the ‘Hide Clear Info’ function can be turned on. • See 3.a) for how to navigate and select options. 9261-9210 EkoTek-Pager/QUG/Iss.
Care • If dropped in water or other solution, rinse in clean water and dry the unit off. The unit is dust and water resistant to IP67. Multitone Electronics plc, Multitone House, Shortwood Copse Lane, Kempshott, Basingstoke, Hampshire, RG23 7NL Telephone: +44 (0)1256 320292 Fax: +44 (0)1256462643 Email: info@multitone.com Web: www.multitone.com This document is for guidance only.