EkoTek Pager USER GUIDE For EkoTek Pager 9261-8275 (Issue 2.
EkoTek Pager CONTENTS Introduction 4 Compliance 5 General User Information 6 EkoTek System Schematic 7 Switching On Your EkoTek Pager 7 Switching On Your EkoTek Pager 8 Status and Warning Messages 9 Switching Off Your EkoTek Pager 10 Using the Emergency / Assist Button 11 Dead Man & Man Down Alert 12 Receiving a Message 14 Reading a Message 16 Viewing a Message Again 17 Accepting, Rejecting & Deleting Two-Way Messages 18 Deleting a Message 19 Delete All Messages 21 Archiving
EkoTek Pager Delete All Archived Messages 25 Set 12/24 Hour Mode 26 Power Save 27 Setting the Alert Options 28 Setting the Message Display Options 30 Setting Auto Delete 32 Changing the Battery 33 Part No. 9261-8275 Issue 2.
EkoTek Pager Introduction Your EkoTek Pager is an alphanumeric two-way messaging device, incorporating an emergency calling/assist facility. The EkoTek Pager is able to receive text messages, allows basic responses and provides the ability to store messages for later viewing. The high contrast screen is capable of displaying up to 150 characters and all menus are displayed in plain language text.
EkoTek Pager Compliance This product complies with the requirements of the EU Radio & Telecommunications Terminal Equipment Directive 99/5/EC. FCC & Industry Canada Statement Of Compliance This device complies with Part 15 of the FCC Rules and Industry Canada Standard RSS 210. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference that may cause undesired operation.
EkoTek Pager General User Information Radio Reception Your EkoTek Pager has been designed to give optimum performance within the coverage area of the transmitting system. As with any radio system there may be areas of poor coverage, where reception may be sporadic, or non-existent. If necessary, consult your system administrator in order to familiarise yourself with these areas. Hazardous Areas This pager should not be taken into areas where explosive gas, or dust products, may be present.
EkoTek Pager EkoTek System Schematic EkoTek Self Organising & Repairing Wireless Mesh Network AC Call Fob Wireless Repeater Power Adaptor Battery Powered Repeater Hub With Web Server Pager Repeater Includes Personal Security Alarm Repeater Repeater to Repeater Distance Typically 10 to 15m Part No. 9261-8275 Issue 2.
EkoTek Pager Switching On Your EkoTek Pager To switch on, press and hold the X button for more that half a second. A message will then be displayed for three seconds, whilst self-checks are being performed. Finally, the Standby Screen will be displayed: 11!34 AM 12.03.07 An exclamation mark (!) will flash between the Hours and the Minutes (11!34 AM). This indicates that the EkoTek Pager is in the process of detecting the EkoTek wireless network.
EkoTek Pager Status and Warning Messages When your EkoTek Pager is switched on the Standby Screen is displayed. This consists of the time and date plus additional status and warning messages. A typical screen is shown below: 11:34 AM 12.03.07 Paul Smith Silent EkoTeK Day The first line is the clock displaying the current time and date, the time may be in either a 12 or 24-hour format. In the top right hand corner the pager will display Day or Night this is used to indicate the shift mode.
EkoTek Pager Switching Off Your EkoTek Pager From the Standby Screen press and release the X button. The options screen will now be displayed: **> Options Time and Date Enable Powersave Power Off <** The two pointers show the item that will be selected if the X button is pressed. Use the S or T buttons to move the pointers to Power Off and select this item by pressing the X button.
EkoTek Pager Using the Emergency / Assist Button Note: This feature has to be enabled by the System Supervisor Raising an Alarm In the event of an Emergency or where immediate Assistance is required press the RED button. Depending on how the EkoTek system is configured this may require a single or a double press. Please confirm this with your EkoTek system supervisor. On pressing the RED button the EkoTek Pager will either beep and/or vibrate in sequence with a flashing alert lamp.
EkoTek Pager Dead Man & Man Down Alert Your EkoTek Pager is equipped with a Dead Man Alert and a Man Down Alarm facility. These features have to be enabled by the System Supervisor. Dead Man Alert The Dead Man Alert operates by initiating an alert to the EkoTek Pager at pre-set time intervals, this alert must be acknowledged by single press on ANY of the pager buttons within a pre-set time period.
EkoTek Pager Man Down Alert The Dead Man Alert operates by automatically initiating an alert sequence if the EkoTek Pager is tipped over: If the EkoTek Pager is tipped-over after a pre-set time interval the pager will beep and will display following warning: 11:34 AM 12.03.07 Paul Smith Day Return unit to upright This allows the unit to be returned to an upright position, terminating the alarm sequence.
EkoTek Pager Receiving a Message When your EkoTek Pager receives a message, the lamp, vibrate and the audible alert will activate, unless silent mode has been selected or the vibrate facility has been turned off. The message will be displayed during the alert period. Your car will be ready for collection next Monday afternoon■ The end of the message is always shown by the character ■.
EkoTek Pager As each new message is received it is stored. The maximum number of messages that can be stored is 6. To make room for new messages your EkoTek Pager will start to delete the oldest read messages. If there are no read messages it will delete the oldest unread message. Part No. 9261-8275 Issue 2.
EkoTek Pager Reading a Message To read a message, press the T button whilst your EkoTek Pager is in the Standby Screen. The most recently received unread message will be displayed: 4:38 PM 12.09.06 Unread Your car will be ready for collection next Monday afternoon■ The top line shows the time and the date the message was received and to the right message status will be displayed, this will either be Unread or Read.
EkoTek Pager Viewing a Message Again While a message is being displayed, press the X button and the message option screen will be displayed. The display response will dependent upon the message type received.
EkoTek Pager Accepting, Rejecting & Deleting Two-Way Messages On receipt of a message press the ► button directly. Or From the Standby Screen press the T button to read the message, press the ► button to acknowledge the message. For two-way messages the following options screen will be displayed: **> View Again Accept Reject Delete <** To respond to the message press the T button and move the pointers to: Accept, Reject or Delete.
EkoTek Pager Deleting a Message To delete a message, press the X button when the ■ appears at the end of the message.
EkoTek Pager When the current message has been deleted, the previously received message will be displayed. If you wish to delete this message repeat the procedure above. To return to the Standby Screen press and hold the X button for one second, if there are no more messages, the following screen will be displayed: No messages Part No. 9261-8275 Issue 2.
EkoTek Pager Delete All Messages Note: The delete all feature is available to all 1-way messages. However, for 2-way messages the delete all feature can only be accessed once the message has been viewed and appropriate action taken. To delete all the messages, press the X button when the ■ appears at the end of the message.
EkoTek Pager Archiving a Message Note: The archive feature is available to all 1-way messages. However, for 2-way messages the archive feature can only be accessed once the message has been viewed and appropriate action taken. Messages may be stored for reference, by using the archive facility. The EkoTek Pager cannot automatically delete archived messages when the message memory is full, only the user can delete messages.
EkoTek Pager Reviewing Archived Messages To review your archived messages, press the S button whilst your EkoTek Pager is displaying the Standby Screen: 10.50 AM 12.09.06 Archive Bring 2 new demo models to the meeting at 11.30 next Tuesday. Ruth■ The first screen of the most recent archived message will be displayed. You may select the archived message that you want to review, by pressing the: S or T buttons until the first screen of the message is displayed.
EkoTek Pager Deleting Archived Messages To delete an archived message, press the X button when the ■ symbol appears at the end of the message. The message option screen will be displayed: **> View again Delete Delete All <** Press the T button to move the pointers to the Delete item and select by pressing the X button. The pointers will change to question marks. View again ??> Delete ? If you do not want to delete, press the S or T buttons.
EkoTek Pager Delete All Archived Messages To delete all of the archived messages, press the X button when the ■ symbol appears at the end of a message. The message option screen will be displayed: **> View again Delete Delete All <** Move the pointers to the Delete All item by pressing the T button. Select by pressing the X button and the pointers will change to question marks: View again Delete ??> Delete All ? If you do not want to delete all the messages press the: S or T buttons.
EkoTek Pager Set 12/24 Hour Mode The Set 12/24 Hour Mode function allows you to set 12 hour to 24hour mode only. From the Standby Screen press the X button. From the Options Screen move the pointers to Set 12/24 Hour Mode by pressing the T button: Options **> Set 12/24 Hour Mode Enable Powersave Power Off <** Select this item by pressing the X button and the pointers will change to question marks.
EkoTek Pager Power Save The Power Save function allows the display to blank after a period to extend the battery life. From the Standby Screen press the X button. From the Options Screen move the pointers to Enable Powersave by pressing the T button: Options Set 12/24 Hour Mode **> Enable Powersave Power Off <** Select by pressing the X button and the pointers will change to question marks. Press the X button again to confirm the selection. Part No. 9261-8275 Issue 2.
EkoTek Pager Setting the Alert Options The EkoTek Pager allows full control of how the pager alerts when messages are received, the audible alert and vibrate alert can be set to ‘off’ or ‘on’. From the Standby Screen press the X button to select the Options Screen: **> Options Set 12/24 Hour Mode Enable Powesave Power Off <** Select Options and press the X button again.
EkoTek Pager When the item you wish to change is flashing, press the S and T button to change its value: The Audible Alert can be either enabled, or disabled. The Vibrate Alert can be either enabled, or disabled. Once your desired alert options have been selected, press and hold the X button for one second and the EkoTek Pager will return to the Standby Screen. Part No. 9261-8275 Issue 2.
EkoTek Pager Setting the Message Display Options Your EkoTek Pager is equipped with display options and these may be set according to your personal requirements. To change the message display options, press the X button from the Standby Screen.
EkoTek Pager The Font option can be set to 1, 2 or 3: • Font option 1 - Corresponds to a text size allowing up to 6 lines per screen (this text size option may be disabled via the programming software). • Font option 2 - Corresponds to a text size allowing up to 4 lines of larger text per screen. • Font option 3 - Corresponds to a text size allowing up to 4 lines per screen of larger text, in a bold font (the date stamp can be suppressed via the programming software, when this text size is selected).
EkoTek Pager Setting Auto Delete The Auto Delete function allows you to set the maximum number of stored messages, excluding those in the Archive memory. If the number of messages in the memory exceeds the selected number, then the oldest Read message is deleted. Should there be no Read messages, then the oldest un-read message is deleted instead.
EkoTek Pager Changing the Battery When the battery is near the end of its operating life, the EkoTek Pager is programmed to provide a visual, audio and vibrate alert warning. The normal audible beep alert will change to a different tone and the Replace Battery warning will be displayed on the Standby Screen: 4:55 PM 12.09.06 Paul Smith Replace Battery EkoTek The EkoTek Pager will continue to operate normally for several days.
EkoTek Pager Notes: Part No. 9261-8275 Issue 2.
EkoTek Pager Part No. 9261-8275 Issue 2.
EkoTek Pager Multitone Electronics plc Multitone House, Shortwood Copse Lane, Basingstoke, Hampshire, England RG23 7DH Part No. 9261-8275 Part No. 9261-8275 Issue 2.
EkoTek Pager – Quick Instructions Button Functions ▲Up ▼Down Send Assist Call (if enabled) ►Menu (long press to: Exit Menu / Cancel Assist Call / Power On) Display : or = on network ! = off network (press Menu button to search for network) 11:34 AM 12.03.07 Day Day / Night indication Paul Smith Name / Message status No vibrate Alert status = Training Room Current location / Pager status 1 of 12 Part No. 9261- 8312 Issue 2.
EkoTek Pager – Quick Instructions Navigating Menu from Main Screen ►Options ►Display Font - set display font size Backlight - backlight ON or OFF (battery saving) Display Timeout - time before display returns to main screen Contrast - display contrast ►Options ►Display TAuto-delete ► Sets maximum number of messages to keep in memory ►Options ►Display T T Alert ► Sets audible & vibrate alert for received messages (alert for red Assist button is set by Supervisor at Hub) ►Options TTime & Date ► Sets 12/24 hou
EkoTek Pager – Quick Instructions Changing the Battery DOOR LOCK Compliance This product complies with the requirements of the EU Radio & Telecommunications Terminal Equipment Directive 99/5/EC. FCC & Industry Canada Statement of Compliance This device complies with Part 15 of the FCC Rules and Industry Canada Standard RSS 210.
EkoTek Pager – Quick Instructions Man-Down Operation (if enabled by Supervisor) To prevent the automatic man-down alarm being sent, keep the Pager in an inverted position (normally worn in the Pager holster on a belt) Dead-Man Operation (if enabled by Supervisor) Press any of the three buttons to respond to periodic dead-man check (audible beep) and pervert automatic alarm generation 4 of 12 Part No. 9261-8312 Issue 2.
EkoTek Pager – Quick Instructions Fonction des boutons ▲Haut ▼Bas Envoyer un appel d’assistance (si active) ►Menu (un appui long permet de: Quitter le menú / Annuler l’appel d’assistance / Allumer l’appareil) Afficher : ou = présence de réseau ! = pas de réseau (appuyer sur touche Menu pour rechercher un réseau) 11:34 AM 12.03.
EkoTek Pager – Quick Instructions Menu de navigation à partir de l'Écran Principal ►Options ►Afficher Police - définit la taille de police de l'affichage Éclairage - éclairage ON ou OFF (économie de batterie) Durée d'affichage - temps restant avant l'affichage de l'écran principal Contraste - contraste de l’affichage ►Options ►Afficher TEffacement Auto ► Définit le nombre maximum de messages à conserver dans la mémoire ►Options ►Afficher T T Alerte ► Définit l'alarme sonore et vibrante pour les messages ent
EkoTek Pager – Quick Instructions Changer la batterie VERROUILLA GE DE COUVERCLE Conformité Ce produit est conforme aux exigences énoncées dans la Directive européenne 99/5/EC relative aux équipements terminaux de Radio et de Télécommunications. Déclaration de Conformité de FCC et d'Industrie Canada Ce dispositif est conforme à la Section 15 du règlement FCC et à la norme RSS 210 de Industrie Canada.
EkoTek Pager – Quick Instructions Fonctionnement Homme mort (si autorisé par le superviseur) Pour éviter le déclenchement de l'alarme homme mort automatique, maintenir le téléavertisseur en position inversée (normalement porté dans un étui, accroché à une ceinture) Fonctionnement Homme à terre (si autorisé par le superviseur) Appuyer sur l’une des trios touches pour effectuer le controle periodique homme mart (bip sonore) et eviter la declenchement automatique de l’alarme 8 of 12 Part No.
EkoTek Pager – Quick Instructions Funciones de las Teclas ▲Arriba ▼Abajo Enviar llamada de Asistencia (is está activada) ►Menú (pulsación larga para: Salir menú / Cancelar llamada de Asistencia / Encender) Pantalla : or = conectado a la red ! = desconectado (presionar la tecla Menú para buscar la red) 11:34 AM 12.03.07 Día Indicación Día / noche Ricardo Castilla Nombre / Estado del Mensaje Vibrador Off Estado de la Alerta = Recepción Localización actual / Estado Receptor status 9 of 12 Part No.
EkoTek Pager – Quick Instructions Navegar por el Menú desde la Pantalla Principal ►Opciones ►Pantalla Fuente Luz Tiempo Pantalla Contraste - tamaño de la letra de la pantalla - luz ON u OFF (ahorro de batería) - tiempo antes de que el visor vuelva a la pantalla principal - contraste de pantalla ►Opciones ►Pantalla TAuto Borrado ► Establece la cantidad máxima de mensajes que se guardarán en la memoria ►Opciones ►Pantalla T T Alerta ► Establece la alerta audible y por vibración para mensajes rx (la alerta d
EkoTek Pager – Quick Instructions Cambio de Batería TRABA DE LA TAPA Cumplimiento Este producto cumple con los requisitos de la Directiva 99/5/EC de la UE sobre Equipos Terminales de Radio y Telecomunicaciones. Declaración de Cumplimiento de la Comisión Federal de Comunicaciones (FCC) y la Industry Canada El equipo cumple con la Parte 15 de las Normas de la FCC y la norma RSS 210 de la Industry Canada.
EkoTek Pager – Quick Instructions Función Hombre-Caído (si está activada por el Supervisor) Para evitar que se envíe la señal de alarma automática hombrecaído, mantenga el Receptor en posición vertical (normalmente se lo lleva en el estuche enganchado al cinturón) Función Hombre-Muerto (si está activada por el Supervisor) Pulsar cualquiera de las tres teclas para responder al control periódico de hombre muerto (beep audible) y evitar la emisión de la alarma automática 12 of 12 Part No. 9261-8312 Issue 2.