ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 ENTR Tiny Bridge Wi-Fi Kit Integration Guide Revision 2.0 Date 24-04-17 Proprietary Notice The information contained in this document is proprietary to Mul-T-Lock. Use or transfer of this document or the information contained herein without the express written consent of Mul-T-Lock is prohibited.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Table of Contents 1. Package contents ............................................................................................................................................... 3 2. HMI and Led Indicators ...................................................................................................................................... 3 3. Getting Started ....................................................................................
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 1. Package contents 1 x Tiny Bridge unit. 1 x Wi Fi kit integration guide. 2. HMI and Led Indicators LED/Push Button Power BLE Wi-Fi Description Remarks Off-Power is not supplied to the Tiny Bridge Solid Green-The Tiny Bridge is on and BIT was successful. Solid Red-BIT failed. Blinking Green-Tiny Bridge is in power up mode. Blinking Red-Firmware upgrading is in progress. Off-The BLE radio is off. Solid Green- The BLE radio is operating.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 WPS push Button Factory Reset push Button operating. Blinking Green- Data is send or receives. Solid Amber: Joined Wi-Fi network successfully. Blinking Amber: Wi-Fi Tx/Rx activity. Solid Red: Failed to join Wi-Fi network. Blinking White: WPS in process. Solid White: WPS end process. This button lets you use WPS to join the Wi-Fi network without typing the Wi-Fi password.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Enter the user name, generate the key code, and share or remember the code for the process of getting the key through the Tiny Bridge unit. Press “Activate”.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 From this moment, for the predefined expiration time, the key will be waiting in the lock (pending) until it will be pulled from the lock using this code. The key pulling can be done by the Tiny Bridge. 3.2 Powering up the Tiny Bridge It is recommended that you first set up this Tiny Bridge somewhere close to the wireless router, and then move this Tiny Bridge to another location for optimal Wi-Fi reception.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.3 Configuration the Tiny Bridge step by step 3.3.1 Configuration App. connecting to the Tiny Bridge Open the configuration application on your mobile phone. Picture 2. A welcome ENTR Tiny Bridge set up appears. Now press the "Scan" button and wait for the app to connecting to the Tiny Bridge.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Picture 3. After the App. is connecting to the Tiny Bridge successfully the App. updates its status to "You are now connected to ENTR Integration Tiny Bridge ENTR-I-TINY BRIDGE". Remark: The same configuration application supports both integration and Tiny Bridges.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.3.2 Pairing the Tiny Bridge to the ENTR BLE domain After adding the Tiny Bridge and generating a key per paragraph 3.1 we can start paring the Tiny Bridge to the ENTR BLE domain. Press the scan icon (picture 3) for ENTR door locks that pending a key. Picture 4. The App. is searching for locks that are in BLE range and have a pending key.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Picture 5. The BLE LED blinks in Amber color that indicates that the Tiny Bridge is searching for locks that are within BLE range and have a pending key. Picture 6. Select "Lock 121" from the list appears on the screen on picture 6.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Picture 7. Type your pin code that you received per paragraph 3.1.a connecting attempt will appears on your screen. Wait for successful connection and ensure that the BLE LED is steady state amber colored.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.3.3 Pairing the Tiny Bridge to the Wi-Fi network domain Picture 8. Now we are ready to configure the Wi-Fi section of the Tiny Bridge. Remark: There are two methods to connect to a Wi-Fi network, one is via WPS (QSS) procedure (see appendix A) and the other is via the configuration application. Press the Wi-Fi scan icon in order to scan for Wi-Fi networks within Wi-Fi range (see picture 8).
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Picture 9. Enter the Wi-Fi network password (SSID), a connecting attempt will appears on your screen. The Wi-Fi LED blinks in Amber color and wait for successful connection – Wi-Fi LED become steady state amber colored.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.3.4 Tiny Bridge to server configuration procedure The integrator has to enter the DNS server IP or URL address and port number (optional). Default port number is 40003. Press "Next" after filling both fields. When setup is done, the Tiny Bridge will try to connect to the server. Make sure the server is running.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 3.3.5 WPS Configuration You can connect to the Tiny Bridge’s Wi-Fi network with Wi-Fi Protected Setup (WPS), to use WPS procedure do the following: Make sure that the Tiny Bridge has power (its green Power LED is lit steady). Press the WPS button on the Tiny Bridge for 3 seconds (WPS button is located on the bottom right of the Tiny Bridge) until the Wi-Fi white color led start blinking.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 4 For radio enclosure Federal Communications Commission (FCC) Statement labelling requirement for small device statement (FCC15.19 (3)) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4.
ENTR Wi-Fi Tiny Bridge integration Guide de April, 24, 2017 Product FCC ID: 2AHH881135 4.5 Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by Mul-T-Lock® may void the user’s authority to operate this equipment. 4.6 RF Exposure info (FCC 2.1093)-for module radio This equipment has been approved for mobile applications where the equipment should be used at distances greater than 20cm from the human body (with the exception of hands, wrists, feet and ankles).
