MiHub User’s Manual MIHUBXR & MIHUBXR-R 880-0094-001 Rev 0.
MiHub User Manual Document Information Title: Version: Created: Last Modified On: Author: Technical Lead: Contributors: MiHub User Manual 0.0 4/23/2013 04/23/2013 BPA Revision History Date 0.1 4/23/2013 Author BPA Comments • Initial draft, submitted for review Reviewers Reviewed By Rev 0.
MiHub User Manual Table of Contents 1. FCC Information: ..................................................................................................................................... 4 2. IC Information ......................................................................................................................................... 5 3. Authorized Antennas .............................................................................................................................. 6 4.
MiHub User Manual 1. FCC Information: Changes or modifications not expressly approved by Mueller Systems could void the user's authority to operate the equipment. IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons during normal operation.
MiHub User Manual 2. IC Information Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
MiHub User Manual 3. Authorized Antennas This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
MiHub User Manual 7. Product Labeling 7.1.Product Identification This label is affixed to the MiHub module. FCC ID:SM6-HUBXRR / IC:9235A-HUBXRR Figure 1- Product Identification Label 7.2.Product Identification This label is affixed to the outside of the MiHub enclosure and indicates the FCC ID of the installed radio module. MODEL MIHUBXR-R FCC ID: SM6-HUBXRR / IC: 9235A-HUBXRR This device complies with Part 15 of the FCC Rules.