21A2695 FIRST CLASS STAMP HERE MODEL 600WM 4545 E BASELINE RD PHOENIX AZ 85040-6400 WATER RESISTANT IN CEILING LOUDSPEAKER OWNERS MANUAL
CONGRATULATIONS WARRANTY We appreciate your choice of MTX Blueprint Series In-Wall Loudspeakers. Properly installed and operated, MTX In-Wall Loudspeakers should provide years of worry-free listening pleasure. It’s important that you follow each step in this guide carefully to insure proper installation. If you have any questions regarding MTX In-Wall Loudspeakers, please call us at 1-800-223-5266.
OTHER BLUEPRINT SERIES PRODUCTS FROM MTX MTX offers a wide assortment of audio components. Ranging from in-wall speakers to amplifiers to accessories. Each component is value engineered and must meet strict quality control standards before it becomes part of the MTX product line. Listed below you will find a sampling of MTX components available from your authorized Blueprint Series dealer.
STEP 1 STEP 4 Using a stud finder (available at low cost at most hardware stores) or other accurate method, locate center point between two studs and mark. Using template provided, trace hole pattern on surface of wall. Placing a bubble level on either the horizontal or vertical guidelines of template will assist you in leveling hole pattern. Attach loudspeaker wires to speaker terminals, observing correct polarity, and position speaker frame assembly to hole as shown.