Specifications

MTI BASICS® Tubs
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Eective 030121
©2021 by MTI Baths, Inc. Modification Rights Reserved.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Package
Package Content
Soaker Soaking bath - No jets. Includes textured bottom.
Air Bath
12 air jets, heated air blower, pre-leveled foam base and
textured bottom.
pre-leveled foam base increases overall tub height 2”-3”
Whirlpool 6 point-massage jets, 1-bhp pump and textured bottom
Options Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories .
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Installation Options . Must be ordered at time of purchase.
Tile Flange
Factory-Installed rigid ABS
3 sides (MBTFK3), 2 sides (MBTFK2),
1 side (MBTFK1)
Must specify flange location(s) on order.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Pre-Leveled Frame and
Foam Base with Skirting
Raised Fixed Panel
5’ Tubs (MBFSKAO5), 5.5’ Tubs (MBFSKAO55),
6’ Tubs (MBFSKAO6)
Raised Removable Panels
5’ Tubs (MBFSKAR5), 5.5’ Tubs (MBFSKAR55),
6’ Tubs (MBFSKAR6)
˚
Before ordering or installing, consider access to equipment.
˚
Always measure tub on-site before building tub deck.
˚
Use proper bedding compound to fully level and support the tub.
˚
Tubs equipped with an air system or factory installed pre-leveled foam base are
designed to install directly onto a flat level subfloor.
˚
Tub height is increasd up to 3” when equipped with factory-installed foam base.
˚
Location of all therapy components is predetermined and cannot be changed.
˚
Options listed cannot be combined with Designer Collection options.
Important Ordering and Installation Information
Hydrotherapy Package Components Included
GFCI / 110V
Soaker with Optional
Inline Heater
½-bhp pump, inline
heater
1-15 amp
Whirlpool or Air Bath 1-bhp pump
1-15 amp
Whirlpool with Optional
Inline Heater
1-bhp pump, inline
heater
1-20 amp
Air Bath with Optional
Inline Heater
heated blower, ½-bhp
pump, inline heater
2-15 amp
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Part #
MBSRR7136E
MBARR7136E
MBWRR7136E
Shown with Whirlpool Package
MBRR7136E
70.75” x 35.75” x 19”
Installation: Drop-In
Material: Acrylic
Plumbed Weight: 125 lbs / 57 kg
Soaker Weight: 100 lbs / 45 kg
Average Fill: 39 gal to above jet level
Maximum Fill: 65 gal to overflow
CSA # MTIS-RR7136E
3"
23"
21"
29"
14 "
17 "
7
8
1"
18¼"
19 "
143°
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US