Instruction Manual

1.
•
a.
•
•
•
b.
•
•
•
•
2.
•
•
MADE IN CHINA
INSTRUCTIONS:
Charging the PowerBank:
Charge the powerbank fully before usage.
Charging Option 1:
Connect the provided charging cable to a
power source and to the Type-C Input
port(3) on the powerbank.
Once connected the LED Indicator(2)will
Charging Option 2:
Place the powerbank on to the Dock Con-
tacts(10) of the Charging Dock(7).
Connect the charging docks intergrated
USB cable to the provided AC Adapter(9)
to a power source.
Once connected the LED Indicator will
***Charging Dock LED Indicator (6)will
illuminate BLUE
Charging Electronic Devices with the
Power Bank:
Connect the charging cable to your mobile
phone/device using the appropriate
connector.
Connect the USB part of the cable to
the USB Output, the LED Indicator will
Snap UL Listed Fast
Wireless Power Bank
Stand Kit
Instruction Manual
7121-70
1 x 10000mAh Wireless Power Bank
1 x UL Listed QC 3.0 AC Adapter
1 x Instruction Manual
1 x USB to Type-C Cable
Capacity: 10000mAh/3.7V/74Wh
Type-C Input: 5V/2A, 9V/2A
USB A Output: 5V/2.4A (Max)
Wireless Output: 5W/7.5W/10W
illuminate BLUE when charging.
Remove the charging cable from your
mobile device when fully charged.
Charging Electronic Devices with the
Wireless Charging:
Wireless charge with the powerbank either
docked or undocked by pressing the
powerbank ON/OFF button(1) to turn on
wireless charging function.
Once on standby mode place wireless
charging supported mobile device on the
charging surface(5), LED will glow RED
when device is charging.
an unknown object is being detected
between the wireless charging pad and the
phone by FOD(Foreign Object Detection).
(The device will not begin to charge until
object is removed.)
Press the Powerbank ON/OFF Button(1)
once to view the remaining power capacity.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
•
•
•
•
•
3.
•
•
**
•
Powerbank ON/OFF Button
LED Indicator
Type-C Input
USB Output
Wireless Charging Surface
Charging Dock LED Indicator
Charging Dock
Charging Dock USB Cable
UL Listed QC 3.0 AC Adapter
Dock to Power Bank Contacts
What’s included:
Features:
LED Indicators
output rating. Overload outputs above the
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For repairs,
Incorrect reassembly may result in a risk of
or temperatures above 104°F (40°C) may
result in explosion.
To ensure product safety, ensure that
identical replacement parts.
Attachments on the back of your phone can
impede the effectiveness of the wireless
charger, and lead to overheating. Please
remove attachments from the phone before
charging on this device.
8.
9.
10.
11.
12.
13.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance
after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
•
1.
2.
3.
4.
5.
6.
7.
SAFETY PRECAUTIONS:
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
inaccordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.