Quick Start Thank you for purchasing the MSI® B550-A PRO motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.
Safety Information ∙∙ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ∙∙ Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. ∙∙ Hold the motherboard by the edges to avoid touching sensitive components.
Installing a Processor https://youtu.
⚠⚠Important If you are installing the screw-type CPU heatsink, please follow the figure below to remove the retention module first and then install the heatsink.
Installing DDR4 memory http://youtu.
Connecting the Front Panel Header http://youtu.
Installing the Motherboard 1 2 ⚽⚽ https://youtu.be/wWI6Qt51Wnc Torque: 3 kgf·cm* 3 *3 kgf·cm = 0.3 N·m = 2.
Connecting the Power Connectors http://youtu.
Installing SATA Drives http://youtu.
Installing a Graphics Card http://youtu.
Connecting Peripheral Devices Pro ces sor wit hR ade on™ Gra phi cs Quick Start 11
Power On 1 2 3 4 12 Quick Start
Contents Quick Start.............................................................................................................. 1 Preparing Tools and Components.......................................................................... 1 Safety Information................................................................................................... 2 Installing a Processor............................................................................................. 3 Installing DDR4 memory..........
JRGB1: RGB LED connector.................................................................................. 39 JRAINBOW1~2: Addressable RGB LED connectors............................................. 40 EZ Debug LED........................................................................................................ 41 LED_SW1: EZ LED Control.................................................................................... 41 Installing OS, Drivers & Utilities............................................
Specifications CPU Chipset Supports AM4 socket 3rd Gen AMD Ryzen™ processors, and future AMD Ryzen™ processors with BIOS update AMD B550 Chipset ∙∙ 4x DDR4 memory slots, support up to 128GB* ▪▪Supports DDR4 1866/ 2133/ 2400/ 2667/ 2800/ 2933/ 3000/ 3066/ 3200 MHz by JEDEC ▪▪Supports DDR4 2667/ 2800 /2933 /3000 /3066 /3200 /3466 /3600/ 3733 /3866 /4000 /4133 /4266 /4400+ MHz by A-XMP OC MODE Memory ▫▫1DPC 1R max speed 4400 MHz ▫▫1DPC 2R max speed 3866 MHz ▫▫2DPC 1R max speed 4000 MHz ▫▫2DPC 2R max spee
Continued from previous page AMD B550 Chipset ∙∙ 6x SATA 6Gb/s ports ∙∙ 2x M.2 slots (Key M) ▪▪M2_1 slot (from AMD Processor) Storage ▫▫Supports PCIe 4.0/ 3.0 x4* ▫▫Supports SATA 6Gb/s ▫▫Supports 2242/ 2260/ 2280/ 22110 storage devices ▪▪M2_2 slot (from AMD B550 chipset) ▫▫Supports PCIe 3.0x4 ▫▫Supports 2242/ 2260/ 2280 storage devices * The supported specification depends on installed processor.
Continued from previous page ∙∙ 1x 24-pin ATX main power connector ∙∙ 1x 8-pin ATX 12V power connector ∙∙ 6x SATA 6Gb/s connectors ∙∙ 2x M.2 slots (M-Key) ∙∙ 1x USB 3.2 Gen 1 5Gbps Type-C port ∙∙ 1x USB 3.2 Gen 1 5Gbps connector (supports additional 2 USB 3.2 Gen 1 5Gbps ports) Internal Connectors ∙∙ 2x USB 2.0 connectors (supports additional 4 USB 2.
Continued from previous page Hardware Monitor Form Factor BIOS Features ∙∙ CPU/ System/ Chipset temperature detection ∙∙ CPU/ System/ Pump fan speed detection ∙∙ CPU/ System/ Pump fan speed control ∙∙ ATX Form Factor ∙∙ 12 in. x 9.6 in. (30.5 cm x 24.4 cm) ∙∙ 1x 256 Mb flash ∙∙ UEFI AMI BIOS ∙∙ ACPI 6.0, SMBIOS 2.
Continued from previous page ∙∙ Audio ▪▪Audio Boost ∙∙ Storage ▪▪Lightning Gen4 M.2 ∙∙ Cooling ▪▪All Aluminum Design ▪▪Extended Heatsink Design ▪▪Pump Fan ▪▪Smart Fan Control ∙∙ LED ▪▪Mystic Light Extension (RAINBOW/RGB) ▪▪Mystic Light SYNC ▪▪Ambient Link ▪▪EZ LED Control ▪▪EZ DEBUG LED Special Features ∙∙ Protection ▪▪M.2 Shield ▪▪PCI-E Steel Armor ▪▪PCI-E Steel Slot ∙∙ Performance ▪▪Lightning Gen 4 PCI-E Slot ▪▪Lightning Gen 4 M.
Package contents Please check the contents of your motherboard package. It should contain: Motherboard Cable Accessories Application Documentation ⚠⚠Important B550-A PRO SATA 6G cables (2 cables/pack) 1 Case badge 1 M.2 screws (3 pcs./pack) Product registration card Driver DVD Quick installation guide MSI components compatibility & reward program card If any of the above items are damaged or missing, please contact your retailer.
Block Diagram 2 Channel DDR4 Memory Processor 1x M.2 2x USB 3.2 Gen1 1x M.2 2x USB 3.2 Gen2 Switch PCIE Realtek ALC892/ ALC897 6x SATA 6Gb/s PCH Front Audio Jacks Rear Audio Jacks NUVOTON 6687 2x PCIe x1 slots 8x USB 2.0 3x USB 3.
Rear I/O Panel USB 3.2 Gen 2 (10Gbps) Type-A PS/2 Combo port Flash BIOS Button DisplayPort Flash BIOS Port USB 2.0 Type-A Audio Ports 1 Gbps LAN USB 3.2 Gen 1 (5Gbps) Type-A USB 2.0 Type-A USB 3.2 Gen 2 (10Gbps) Type-C ∙∙ Flash BIOS Port/ Button - Please refer to page 46 for Updating BIOS with Flash BIOS Button.
Realtek Audio Console After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience. Application Enhancement Device Selection Main Volume Connector Settings Jack Status ∙∙ Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
Audio jacks to headphone and microphone diagram Audio jacks to stereo speakers diagram AUDIO INPUT Audio jacks to 7.
Overview of Components Processor Socket CPU_FAN1 PUMP_FAN1 CPU_PWR1 JRAINBOW2 SYS_FAN1 SYS_FAN2 ATX_PWR1 JTPM1 SYS_FAN6 JUSB4 DIMMB2 DIMMB1 M2_1 PCI_E1 DIMMA1 JBAT1 SATA▼5▲6 PCI_E2 SATA▼1▲2 PCI_E3 SATA▼3▲4 M2_2 SYS_FAN3 PCI_E4 JRAINBOW1 JAUD1 JFP1 JCI1 JRGB1 SYS_FAN5 JCOM1 LED_SW1 JUSB1 JUSB3 JFP2 JUSB2 SYS_FAN4 Overview of Components 25
Component Contents Port Name Page CPU_FAN1, PUMP_FAN1, SYS_FAN1~6 Fan Connectors 36 DIMMA1, DIMMA2, DIMMB1, DIMMB2 Power Connectors 33 DIMM Slots 28 JAUD1 Front Audio Connector 32 JCI1 Chassis Intrusion Connector 37 CPU_PWR1, ATX_PWR1 JBAT1 JCOM1 JFP1, JFP2 JRAINBOW1~2 JRGB1 JTPM1 JUSB1~2 JUSB3 JUSB4 LED_SW1 M2_1~2 PCI_E1~4 Processor Socket SATA1~6 26 Port Type Overview of Components Clear CMOS (Reset BIOS) Jumper Serial Port Connector Front Panel Connectors Addressable RGB L
Processor Socket Distance from the center of the CPU to the nearest DIMM slot. 53.8 mm Introduction to the AM4 CPU The surface of the AM4 CPU has a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator. ⚠⚠Important ∙∙ When changing the processor, the system configuration could be cleared and reset BIOS to default values, due to the AM4 processor’s architecture.
DIMM Slots DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 Memory module installation recommendation DIMMA2 ⚠⚠Important DIMMA2 DIMMB2 DIMMA1 DIMMA2 DIMMB1 DIMMB2 ∙∙ Always insert memory modules in the DIMMA2 slot first. ∙∙ Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed. ∙∙ Based on CPU specification, the Memory DIMM voltage below 1.35V is suggested to protect the CPU.
PCI_E1~4: PCIe Expansion Slots PCI_E1: PCIe 3.0/ 4.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (PCH) PCI_E3: PCIe 3.0 x4 (PCH) ⚠⚠Important PCI_E4: PCIe 3.0 x1 (PCH) ∙∙ If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot. ∙∙ For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.
SATA1~6: SATA 6Gb/s Connectors These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. SATA4 SATA3 SATA2 SATA1 SATA6 SATA5 ⚠⚠Important ∙∙ Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise. ∙∙ SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes. M2_1~2: M.
1 2 1 3. Move and fasten the M.2 standoff to the appropriate position for your M.2 SSD, or remove the M.2 standoff if your M.2 SSD length is same as the length of M.2 heatsink to avoid damage to the M.2 SSD. 4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle. 5. Secure the M.2 SSD in place with the M.2 screw, or skip this step if you remove the M.2 standoff in step 3. 4 M.2 screw M.2 standoff 5 30º 3 heatsink standoff 6. Put the M.2 SHIELD FROZR heatsink back in place and secure it.
JFP1, JFP2: Front Panel Connectors These connectors connect to the switches and LEDs on the front panel.
CPU_PWR1, ATX_PWR1: Power Connectors These connectors allow you to connect an ATX power supply. 1 2 3 24 1 13 5 6 7 +12V +3.3V 13 +3.3V 3 Ground 15 Ground 5 Ground 6 7 +3.3V +5V +5V Ground 8 +12V +12V 1 14 18 Ground 19 20 10 +12V 22 12 5VSB +12V +3.
JUSB4: USB 3.2 Gen 1 5Gbps Type-C Connector This connector allows you to connect USB 3.2 Gen 1 5Gbps Type-C connector on the front panel. The connector possesses a foolproof design. When you connect the cable, be sure to connect it with the corresponding orientation. USB Type-C Cable JUSB4 USB Type-C port on the front panel JUSB3: USB 3.2 Gen 1 5Gbps Connector This connector allows you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.
JUSB1~2: USB 2.0 Connectors These connectors allow you to connect USB 2.0 ports on the front panel. 1 VCC 3 10 1 9 2 USB0- 5 4 USB0+ 7 ⚠⚠Important 2 6 Ground 9 USB1+ 8 No Pin VCC USB1- Ground 10 NC ∙∙ Note that the VCC and Ground pins must be connected correctly to avoid possible damage. ∙∙ In order to recharge your iPad,iPhone and iPod through USB ports, please install MSI® DRAGON CENTER utility. JTPM1: TPM Module Connector This connector is for TPM (Trusted Platform Module).
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. The auto mode fan connectors can automatically detect PWM and DC mode. However, you can follow the instruction below to adjust the fan connector to PWM or DC Mode manually.
JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable. Normal (default) Trigger the chassis intrusion event Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6.
JCOM1: Serial Port Connector This connector allows you to connect the optional serial port with bracket. 2 1 DCD 3 1 SOUT 5 Ground 9 RI 7 RTS 10 2 9 4 SIN DTR 6 DSR 10 No Pin 8 CTS JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.
JRGB1: RGB LED connector The JRGB connector allows you to connect the 5050 RGB LED strips 12V. 1 3 1 +12V R 2 4 G B RGB LED Strip Connection 1 G R B RGB extension cable JRGB connector 5050 RGB LED strips 12V RGB LED Fan Connection JRGB connector 1 G R B 1 System Fan connector RGB LED Fan ⚠⚠Important ∙∙ The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips (12V/G/R/B) with the maximum power rating of 3A (12V).
JRAINBOW1~2: Addressable RGB LED connectors The JRAINBOW connectors allow you to connect the WS2812B Individually Addressable RGB LED strips 5V. 1 1 3 +5V 2 No Pin 4 Data Ground Addressable RGB LED Strip Connection +5V 1 D JRAINBOW connector Rainbow RGB LED extension cable Addressable RGB LED Fan Connection WS2812B Individually Addressable RGB LED strips 5V JRAINBOW connector 1 1 System Fan connector ⚠⚠CAUTION Addressable RGB LED Fan Do not connect the wrong type of LED strips.
EZ Debug LED These LEDs indicate the debug status of the motherboard. CPU - indicates CPU is not detected or fail. DRAM - indicates DRAM is not detected or fail. VGA - indicates GPU/ PCIE/ M.2 device is not detected or fail. BOOT - indicates the booting device is not detected or fail. LED_SW1: EZ LED Control This switch is used to switch on/ off all the LEDs of motherboard.
Installing OS, Drivers & Utilities Please download and update the latest utilities and drivers at www.msi.com Installing Windows® 10 1. Power on the computer. 2. Insert the Windows® 10 installation disc/USB into your computer. 3. Press the Restart button on the computer case. 4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu. 5. Select the Windows® 10 installation disc/USB from the Boot Menu. 6. Press any key when screen shows Press any key to boot from CD or DVD...
UEFI BIOS MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface) architecture. UEFI has many new functions and advantages that traditional BIOS cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s capabilities. However, it still has a CSM (Compatibility Support Module) mode to be compatible with older devices.
BIOS Setup The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS. ⚠⚠Important ∙∙ BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
Resetting BIOS You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: ∙∙ Go to BIOS and press F6 to load optimized defaults. ∙∙ Short the Clear CMOS jumper on the motherboard. ⚠⚠Important Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper section for resetting BIOS.
Updating the BIOS with MSI DRAGON CENTER Before updating: Make sure the LAN driver is already installed and the internet connection is set properly. Updating BIOS: 1. Install and launch MSI DRAGON CENTER and go to Support page. 2. Select Live Update and click on Advance button. 3. Click on Scan button to search the latest BIOS file. 4. Select the BIOS file and click on Download icon to download and install the latest BIOS file. 5. Click Next and choose In Windows mode.
EZ Mode At EZ mode, it provides the basic system information and allows you to configure the basic setting. To configure the advanced BIOS settings, please enter the Advanced Mode by pressing the Setup Mode switch or F7 function key.
∙∙ System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU type, memory size, CPU/ DDR voltage, BIOS version and build date. ∙∙ Boot device priority bar - you can move the device icons to change the boot priority. The boot priority from high to low is left to right. ∙∙ Component Information - click on the CPU, Memory, Storage, Fan Info and Help buttons to show the information of connected component. ∙∙ Function buttons - enable or disable these functions by clicking on these buttons.
▪▪To add a BIOS item to a favorite menu 1. Select a BIOS item not only on BIOS menu but also on search page. 3. Choose a favorite page and click on OK. 2. Right-click or press F2 key. ▪▪To delete a BIOS item from favorite menu 1. Select a BIOS item on favorite menu. 3. Choose Delete and click on OK. 2. Right-click or press F2 key.
Advanced Mode Press Setup Mode switch or F7 function key can switch between EZ Mode and Advanced Mode in BIOS setup. BIOS menu selection BIOS menu selection Menu display ∙∙ BIOS menu selection - the following options are available: ▪▪SETTINGS - allows you to specify the parameters for chipset and boot devices. ▪▪OC - allows you to adjust the frequency and voltage. Increasing the frequency may get better performance. ▪▪M-FLASH - provides the way to update BIOS with a USB flash drive.
SETTINGS Menu This menu allows you to specify the parameters for system, chipset and boot devices. ▶▶System Status sub-menu The System Status sub-menu allows you to set the system clock and view system information. ▶▶System Date Sets the system date. Use tab key to switch between date elements. The format is . Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec.
▶▶Integrated Graphics Configuration sub-menu (optional) Adjusts integrated graphics settings for optimum system. This sub-menu is only available when using the CPU which integrate with IGP. ▶▶USB Configuration sub-menu Sets the onboard USB controller and device function. Press Enter to enter the sub-menu. ▶▶Super IO Configuration sub-menu Sets system Super I/O chip parameters including COM ports. Press Enter to enter the sub-menu.
OC Menu This menu allows you to configure the frequencies and voltages for overclocking. Please note that, higher frequency and voltage may benefit overclocking capability but cause system un-stability. ⚠⚠Important ∙∙ Overclocking your PC manually is only recommended for advanced users. ∙∙ Overclocking is not guaranteed, and if done improperly, it could void your warranty or severely damage your hardware.
▶▶Memory Try It ! [Disabled] It can improve memory compatibility or performance by choosing optimized memory preset. This item will be available when the installed processor supports this function. ▶▶Memory Failure Retry [Enabled] Enables or disables the system reboot function when the memory OC retry fails. ▶▶Memory Failure Retry Count [2] Sets the count for memory OC retry. When memory OC retry fails reach the count, the memory will restore the last available settings.
M-FLASH Menu M-FLASH provides the way to update BIOS with a USB flash drive. Please download the latest BIOS file that matches your motherboard model from MSI website, save the BIOS file into your USB flash drive. And then follow the steps below to update BIOS. 1. Insert the USB flash drive that contains the update file into the computer. 2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to reboot and enter the flash mode. 3.
OC PROFILE Menu ▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press Enter to enter the sub-menu. ▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Name the current overclocking profile. ▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Save the current overclocking profile. ▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Load the current overclocking profile. ▶▶Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Clear the current overclocking profile.
HARDWARE MONITOR Menu This menu allows you to adjust the fan speed manually and monitor CPU/ system voltage. Select a temperature curve line (white) to be showed in Fan operating window Select a fan mode for target fan Select a fan to be configured Click to enable the Smart Fan Smart Fan duty information Fan operating window Setting Buttons Temperature information Voltage information ∙∙ Smart Fan - This setting enables/disables the Smart Fan function.
Adjusting fans 1. Selects a fan that you want to adjust and to display the fan duty curve line (yellow) in fan operating windows. 2. Click and drag the duty points to adjust the fan speed. Select a fan to be adjusted Duty points ⚠⚠Important The pictures in this section are for reference only and may vary from the motherboard you purchased.
AMD RAID Configuration The following are the RAID levels supported by RAIDXpert2. RAID 0 RAID 1 (Striping) breaks the data into blocks which are written to separate hard drives. Spreading the hard drive I/O load across independent channels greatly improves I/O performance. (Mirroring) provides data redundancy by mirroring data between the hard drives and provides enhanced read performance.
Initializing Disks New disks and legacy disks must be initialized before they can be used to create an AMD-RAID array. Initialization writes AMD-RAID configuration information (metadata) to a disk. ⚠⚠Important ∙∙ If a disk is part of an AMD-RAID array, the disk cannot be selected for initialization. To initial the disk anyway, delete the AMD-RAID array. Data on the disk is deleted during initialization so ensure the correct disks are chosen to initialize. ∙∙ A legacy disk can contain valid data.
Creating Arrays Arrays can be created after the disks are initialized. ⚠⚠Important ∙∙ For redundant arrays, the Create process is not started until after the operating system and AMD-RAID OS drivers have been installed and the system has booted to the operating system. However, the arrays are immediately available to use for either a bootable array or a data array. ∙∙ Array numbers are valid only for a given boot and might be different in the RAIDXpert2 Configuration Utility and RAIDXpert2.
Deleting Arrays ⚠⚠Important ∙∙ Deleting an array permanently destroys all data that is on the array. This action cannot be undone and it is very unlikely that the data can be recovered. ∙∙ Do not delete the first array listed in the Arrays section, if it is the AMD-RAID bootable array. Doing this deletes the operating system and AMD-RAID files. To delete an array 1. As previously mentioned, enable RAIDXpert2 Configuration Utility. 2.
Installing RAID Driver New Operating System Installation The following details the installation of the drivers while installing operating system. 1. During the operating system installation, after selecting the location to install Windows click on Load driver button to install a third party RAID driver. 2. When prompted, insert the USB flash drive with AMD RAID Drivers and then click Browse. ▪▪To make an AMD RAID Drivers USB flash drive. Insert the MSI Driver Disc into the optical drive.
Troubleshooting Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below. The power is not on. ∙∙ Connect the AC power cord to an electrical outlet securely. ∙∙ Check if all ATX power connectors like ATX_PWR1, CPU_PWR1 are connected from the power supply to the motherboard? ∙∙ Some power supply units have a power button on the rear side, make sure the button is turned on.
Regulatory Notices FCC Compliance Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
you that... Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/ EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz. ČESKY Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/ EC platné od 13.
MS-7C56主板产品中有害物质的名称及含量 部件名称 铅 汞 镉 有害物质 六价铬 多溴联苯 多溴二苯醚 ○ ○ ○ (Pb) (Hg) (Cd) (Cr(VI)) 电池** ╳ ○ ○ ○ ○ ○ 外部信号连接头 ╳ ○ ○ ○ ○ ○ 印刷电路板组件* 线材 本表格依据 SJ/T 11364 的规定编制。 ╳ ╳ ○ ○ ○ ○ (PBB) ○ ○ (PBDE) ○ ○: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。 ╳: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合 欧盟RoHS要求。 * 印刷电路板组件: 包括印刷电路板及其构成的零部件。 ** 电池本体上如有环保使用期限标识，以本体标识为主。 ■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。 ■ 產品部件本体上如有环保使用期限标识，以本体标识为主。 限用物質含有情況標示聲明書 設備名稱：電腦主機板 單元 電路板 電子元件 金屬機構件
