4 Basic Operation EN NOTE: If LUNAR is powered on and the Single Point Charger is plugged into an outlet, the device may take a longer time to charge than when the device is powered off. The battery can also be removed from LUNAR and inserted into the Single Point Charger to charge. SHOW IMAGE label facing down with gold circles and red/green above (2) Using the Universal Multi-Bay Charger LINK to QSG 4.1.
EN 4 Basic Operation CAUTION! LUNAR device and battery must be clean and dry prior to installation of the battery, or corrosion or connector damage may occur. Failure to follow this caution can result in minor or moderate injury. Removing the Battery CAUTION! LUNAR device must be clean and dry prior to removal of the battery to prevent moisture or contaminants from entering the electrical connector area. Failure to follow this caution can result in minor or moderate injury. 4.1.
4 Basic Operation EN * 4.1.6 Viewing Battery Level and Device Assignment (Quick Check) When LUNAR is powered off, a Quick Check can be activated to view the battery level and device assignment. Press either the Down or Enter button. The Quick Check screen displays the Battery Level icon, the assigned engine seat, and the ID. * 4.1.7 Maintaining LUNAR Make sure this product is inspected and serviced regularly by authorized MSA service personnel. Keep detailed inspection and service records.
EN 4 Basic Operation • Ensure LUNAR battery is charged regularly depending on useto a battery level of 50% or higher. • Ensure LUNAR powers on. • Ensure Motion Alarm activates when LUNAR does not move for an extended period. • Ensure a Manual Alarm can be activated. • Ensure a search can be started. After Each Use • Carefully clean the Display and TIC lens with a lint-free, isopropyl alcohol wipe. • Carefully dry using a soft, lint-free cloth. Avoid scratching the Display and TIC lens.
Features 5 EN Features 5.0.1 Starting a Search Start a new search or join a current search from the Main menu. Up to four Users can participate in a search at one time. (1) Open the main menu. (2) Select START SEARCH. (3) Scroll the list of names. All Targets with alarms activated are listed in order of alarm priority. (4) Select the name of the Target and start or join the search.
EN 5.1 5 Features Searching Overview Once a search is started, LUNAR enters Search mode. Use the direction and distance indicators on the Display to help locate the Target. UPDATED IMAGE FROM QSG NEEDED A Distance (measurement) Indicates distance, in feet or meters, from the Target. B Distance (visual indicator) Arcs are directly correlated to distance from the Target. • At 80+ feet (24 meters), the outer arc is indicated. • At 40 feet (12 meters) or less, the middle arc is indicated.
5 Features EN • Colors - Directly correlated to the signal strength. The lighter the color, the stronger the signal. NOTE: At further distances or with more obstructions between the searcher and Target, the directional strength indicator will provide lower values. As the Searcher gets closer and orients the device toward the Target, these numbers will increase. D Thermography Temperature of the area or item in front of the device.
EN 5 Features Exit Search Select EXIT SEARCH. LUNAR returns to the Display. Start New Search 5.4 (1) Select NEW SEARCH. (2) Scroll the list of names. (3) Select the name of the Target to locate and start or join the search. See "Starting a Search" on page 32. Acknowledging a PAR Check Notification When a PAR Check is initiated in FireGrid, a notification appears on the LUNAR device and the PAR icon is displayed in the status bar. To acknowledge the PAR Check, press the Enter button.
5 Features EN NOTE: A PAR Check notification is not displayed if there is an active Manual or Motion alarm on the device. First, cancel the Manual alarm if it is safe to do so. The PAR Check notification is then displayed and the check can be acknowledged. 5.
EN 6 Learn More 6 Learn More 6.1 Support For technical support, please contact MSA: Phone: Fax: Email: 6.2 1-877-MSA-FIRE (1-877-672-3473) 1-877-672-3930 fire.cs@msasafety.com Specifications 6.2.1 Radio Radio Part Number Power Frequency Range Bluetooth All Part Numbers ≤ 4 dBm 2.400 GHz - 2.4835 GHz 2.4 GHz Radio US Part Numbers ≤ 20 dBm 2.400 GHz - 2.4835 GHz EU Part Number ≤ 10 dBm 2.400 GHz - 2.
6 Learn More 6.3 EN Warranty MSA The Safety Company warrants MSA LUNAR to be free from defects in materials and/or faulty workmanship for a period of two (2) years. An optional extended warranty is available. For any additional information relative to use or repair, call 1-877-MSA-FIRE (1877-672-3473) or write an e-mail to fire.cs@msasafety.com. For additional contact information refer to the MSA website at http://www.MSAsafety.com. 6.
EN 7 7 Appendix A: Open Source Libraries Appendix A: Open Source Libraries PACKAGE NAME PACKAGE VERSION LICENSE arm-memspeed 1.00 GPLv2 aws-iot-device-sdk-cpp-v2 1.0+gitAUTOINC+65b8344ddb Apache-2.0 base-files 3.0.14 GPLv2 base-passwd 3.5.29 GPLv2+ bash 4.40 GPLv3+ bc 1.06 GPLv2+|LGPLv2.1 bluepy 1.3.0 GPL-2.0 bluez5 5.50 GPLv2+|LGPLv2.1+ bluez5-btmgmt-tool 5.50 GPLv2+|LGPLv2.1+ bluez5-noinst-tools 5.50 GPLv2+|LGPLv2.1+ bluez5-testtools 5.50 GPLv2+|LGPLv2.
7 Appendix A: Open Source Libraries EN PACKAGE NAME PACKAGE VERSION LICENSE devmem2 1.00 GPLv2+ directfb 1.7.7 LGPLv2.1 dosfstools 4.10 GPLv3 e2fsprogs-mke2fs 1.43.5 GPLv2 e2fsprogs-resize2fs 1.43.5 GPLv2|LGPLv2|BSD|MIT e2fsprogs-tune2fs 1.43.5 GPLv2 ethtool 4.11 GPLv2+ eudev 3.2.2 GPLv2.0+|LGPL-2.1+ eudev-hwdb 3.2.2 GPLv2.0+|LGPL-2.1+ evtest 1.33+AUTOINC+ab140a2dab GPLv2 expat 2.2.3 MIT fbtest 20041102-1 GPLv2 file 5.31 BSD flashbench 0.
EN 7 Appendix A: Open Source Libraries PACKAGE NAME PACKAGE VERSION LICENSE kernel-base 1.00 GPLv2 kernel-module-cryptodev-4.14.78- 1.90 msa-lunar-ts GPLv2 kernel-module-g-acm-ms-4.14.78- 1.00 msa-lunar-ts GPLv2 kernel-module-g-cdc-4.14.78msa-lunar-ts 1.00 GPLv2 kernel-module-g-ether-4.14.78msa-lunar-ts 1.00 GPLv2 kernel-module-g-ffs-4.14.78-msa- 1.00 lunar-ts GPLv2 kernel-module-g-hid-4.14.78-msa- 1.00 lunar-ts GPLv2 kernel-module-g-mass-storage4.14.78-msa-lunar-ts 1.
7 Appendix A: Open Source Libraries EN PACKAGE NAME PACKAGE VERSION LICENSE libcrypto 1.0.2o openssl libcurl 7.58.0 MIT libdrm 2.4.89 MIT libdrm-etnaviv 2.4.89 MIT libdrm-kms 2.4.89 MIT libdrm-tests 2.4.89 MIT libe2p 1.43.5 GPLv2|LGPLv2|BSD|MIT libeigen 3.3.4 MPL-2.0 libelf 0.17 (GPLv3|Elfutils-Exception) libestr 0.1.10 LGPLv2.1 libevent 2.1.8 BSD|MIT libext2fs 1.43.5 GPLv2|LGPLv2|BSD|MIT libfastjson 0.99.4 MIT libffi 3.2.1 MIT libgcc 7.3.0 GPL-3.
EN 7 Appendix A: Open Source Libraries PACKAGE NAME PACKAGE VERSION LICENSE libpython3 3.5.3 PSFv2 libsdl2 2.0.5 Zlib libsqlite3 3.20.0 PD libssl 1.0.2o openssl libstdc++ 7.3.0 GPL-3.0-with-GCC-exception libtirpc 1.0.2 BSD libudev 3.2.2 LGPL-2.1+ libunistring 0.9.7 LGPLv3+ libusb1 1.0.21 LGPLv2.1+ libwrap 7.60 BSD libxml2 2.9.5 MIT linux-firmware-imx-sdma-imx6q 0.0+gitAUTOINC+8fc2d4e556 Firmware-imx-sdma_firmware linux-firmware-imx-sdma-license 0.
7 Appendix A: Open Source Libraries EN PACKAGE NAME PACKAGE VERSION LICENSE nettle 3.30 LGPLv3+ nfs-utils-client 2.1.1 MIT|GPLv2+|BSD nfs-utils-mount 2.1.1 MIT|GPLv2+|BSD openssh 7.5p1 BSD openssh-keygen 7.5p1 BSD openssh-scp 7.5p1 BSD openssh-sftp-server 7.5p1 BSD openssh-ssh 7.5p1 BSD openssh-sshd 7.5p1 BSD openssl 1.0.2o openssl openssl-conf 1.0.2o openssl packagegroup-core-boot 1.00 MIT packagegroup-core-nfs-client 1.00 MIT packagegroup-core-ssh-openssh 1.
EN 7 Appendix A: Open Source Libraries PACKAGE NAME PACKAGE VERSION LICENSE python-readline 2.7.14 PSFv2 python3-2to3 3.5.3 PSFv2 python3-argparse 3.5.3 PSFv2 python3-asyncio 3.5.3 PSFv2 python3-audio 3.5.3 PSFv2 python3-codecs 3.5.3 PSFv2 python3-compile 3.5.3 PSFv2 python3-compression 3.5.3 PSFv2 python3-core 3.5.3 PSFv2 python3-crypt 3.5.3 PSFv2 python3-ctypes 3.5.3 PSFv2 python3-curses 3.5.3 PSFv2 python3-datetime 3.5.3 PSFv2 python3-db 3.5.
7 Appendix A: Open Source Libraries EN PACKAGE NAME PACKAGE VERSION LICENSE python3-misc 3.5.3 PSFv2 python3-mmap 3.5.3 PSFv2 python3-modules 3.5.3 PSFv2 python3-msgpack 0.4.8 Apache-2.0 python3-multiprocessing 3.5.3 PSFv2 python3-netclient 3.5.3 PSFv2 python3-netserver 3.5.3 PSFv2 python3-nose 1.3.7 LGPLv2.1 python3-numbers 3.5.3 PSFv2 python3-numpy 1.13.1 BSD-3-Clause python3-obex git GPLv3+ python3-pickle 3.5.3 PSFv2 python3-pkgutil 3.5.
EN 7 Appendix A: Open Source Libraries PACKAGE NAME PACKAGE VERSION LICENSE python3-syslog 3.5.3 PSFv2 python3-terminal 3.5.3 PSFv2 python3-textutils 3.5.3 PSFv2 python3-threading 3.5.3 PSFv2 python3-tkinter 3.5.3 PSFv2 python3-typing 3.5.3 PSFv2 python3-unittest 3.5.3 PSFv2 python3-unixadmin 3.5.3 PSFv2 python3-xml 3.5.3 PSFv2 python3-xmlrpc 3.5.3 PSFv2 readline 7.00 GPLv3+ rpcbind 0.2.4 BSD rsync 3.1.3 GPLv3+ rsyslog 8.29.0 GPLv3|LGPLv3|Apache-2.
7 Appendix A: Open Source Libraries EN PACKAGE NAME PACKAGE VERSION LICENSE util-linux-ionice 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-libblkid 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-libfdisk 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-libmount 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-libsmartcols 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-libuuid 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-losetup 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-lsblk 2.30 GPLv2+|LGPLv2.1+|BSD util-linux-mkfs 2.30 GPLv2+|LGPLv2.
