User's Manual

ManualsBrandsMS Sed ManualsElectronicsCLEARPATH SPECTRUM COORDINATOR

8701 Castle Park Drive  Indianapolis, Indiana 46256

Telephone: (800) 842-2545/(317) 842-2545  www.mssedco.com  custsvc@mssedco.com

Page 1

S-CORv0312

Section 1

General Description

The ClearPath Spectrum Coordinator functions in a

similar role to traditional wireless system receiver and

timing modules, and feature several industry firsts.

ClearPath Spectrum products feature digital two-way

communication, increasing security and allowing users to

pair transmitters to coordinators, identify the

transmitter’s location, and monitor battery power.

Optional SecureActivation will require users of the

outside switch to be granted clearance before activation

can occur. ClearPath Spectrum coordinators feature two

outputs with programmable time delay.

ClearPath Spectrum products operate at 2.4 GHz, making

the wave length more than 5 times shorter than

commonly-used frequencies. Shorter waves pass

through cracks and barriers easier, and transmitters will

continue to attempt to contact the coordinator until it

receives an acknowledgement.

Section 2

Basic Installation

The physical placement of the CS/COR is typically in the

door operator housing area since the power supply and

operator control are already there.

Section 3

Technical Data

Model.................................. ClearPath Spectrum™ S-COR

Input Power......................... 12-24V AC or DC

Output Contacts.................. Form C

Relay 1 Contact Rating....... 3A:24V AC

Relay 2 Contact Rating....... 1A:24V AC

Temperature Rating........... -22°F to 158°F

(-30°C to 70°C)

Weight................................. 0.25 lbs.

Physical Size....................... 3 3/4"L x 2 1/4"W x 1"H

Spectrum Coordinator INSTALLATION INSTRUCTIONS

S-COR

hClearPat

™

Note that Output 1 will typically be used to trigger an electronic locking device, while Output 2 will be used

to activate an automatic door.

FIGURE 1

Wiring Diagram

RED (+) 12-40V AC or DC

GREEN (Relay 2 - N.O.)

BLK (-) 12-40V AC or DC

GREEN (Relay 2 - COM)

WHT (Relay 1 - N.C.)

BROWN (Relay 1 - COM)

VIO (Relay 1 - N.O.)

GREEN

WHITE

Summary of content (4 pages)

PAGE 1
ClearPat h ™ S-COR INSTALLATION INSTRUCTIONS Spectrum Coordinator Section 2 Section 1 General Description The ClearPath Spectrum Coordinator functions in a similar role to traditional wireless system receiver and timing modules, and feature several industry firsts. ClearPath Spectrum products feature digital two-way communication, increasing security and allowing users to pair transmitters to coordinators, identify the transmitter’s location, and monitor battery power.
PAGE 2
ClearPat h ™ S-COR INSTALLATION INSTRUCTIONS Spectrum Coordinator Section 4 Programming the Coordinator — Single Openings: Upon power up, the screen will read “MS Sedco: Press Select to Begin.” Press Select. The next screen will read “Add Setting.” This is the place where users can program additional features into the device. Five additional settings are available: HH Signal Range, Output Delay, SecureActivation, Ratchet Relay, and Unpair Devices.
PAGE 3
ClearPat h ™ S-COR INSTALLATION INSTRUCTIONS Spectrum Coordinator Section 5 Programming the Coordinator — Vestibule Openings: Upon power up, the screen will read “MS Sedco: Press Select to Begin.” Press Select. The next screen will show “Opening Type.” The default is Single. Use the arrows to choose Vestibule, then press Select. Coordinator’s screen, press the < button.) Upon pressing the PAIR button, the screen should change to “IDxxxx Paired Press Select.
PAGE 4
ClearPat h ™ S-COR INSTALLATION INSTRUCTIONS Spectrum Coordinator Ratchet Relay – If Ratchet Relay is turned on, the output 2 relay will remain closed until a second signal is received. HH Signal Range – ClearPath Spectrum devices transmit a much greater distance than other wireless products used in the automatic door industry.