USER’S MANUAL GB 1 F NL GR ES
DECLARATION OF CONFORMITY We, the undersigned, Company: TE-Group nv Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM declare, that the following equipment : Product Name: mr Handsfree BLUE SWITCH Product Type: Bluetooth® Carkit Conforms with the requirements of European Council Directive 99/5/EEC
1 1 2 2 3 2 3x4 9 6 4 7 ILLUSTRATION II 8 5 Option 2 Option 1 11.1 10.1 11.2 13.1 12.1 13.2 13.4 13.
TABLE OF CONTENTS SAFETY INSTRUCTIONS GB-6 INTRODUCTION GB-6 PACKAGE CONTENTS GB-7 DESCRIPTION GB-8 INSTALLATION OF THE BLUE SWITCH GB-11 OPERATION OF THE BLUE SWITCH GB-17 BLUETOOTH® GB-20 CARE AND TECHNICAL MAINTENANCE GB-21 GUARANTEE GB-21 GB-5
SAFETY INSTRUCTIONS 1. 2. 3. 4. Make sure that the operation of the Blue Switch will never influence your safety. Make sure not to impact the steering or braking system or other key systems essential for proper operation of the car when installing the Blue Switch. Make sure that the deployment of the airbag is not blocked or impaired in any way. Install the Blue Switch before starting your car.
PACKAGE CONTENTS See illustration I 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Handsfree unit with built-in speaker Double-sided tape plate for fixation of the handsfree unit Set of screws for fixation of the handsfree unit – 4 pcs. Ear hook Ear cap Headset Cradle for headset USB charger with cradle Velcro for fixation of the cradle Cable set – Option 1 – For Blue Switch Plug & Play (Optional) 10.1. Adapter for connecting the handsfree unit to the car via the cigarette lighter.
DESCRIPTION HANDSFREE UNIT The handsfree unit includes built-in speaker, echo canceller, noise suppressor, DSP technology and Bluetooth® wireless technology, which provides a wireless connection with Bluetooth® mobile phones. The handsfree unit has the following jacks for connecting external units: 1. Socket for headset cradle. 2. Socket for external speaker connection (3-6W, min 8 Ohm). When the external speaker is connected to socket 2, the built-in speaker is switched off automatically.
CRADLE FOR HEADSET Cradle for connection to handsfree unit. As soon as the headset is placed in the cradle, it will charge automatically and will switch to carkit mode. USB CHARGER WITH CRADLE Extra cradle for charging the headset with USB connection. Fuse CIGARETTE PLUG (Optional) The cigarette plug is used for Plug & Play installation. It provides power supply via the cigarette lighter. The cigarette plug is supplied with changeable fuses. How to change the fuses is indicated in the illustration.
SMALL MUTE CABLE (Optional) ISO CABLE (Optional) The small mute cable connects the handsfree unit with the power supply and the ignition system and is used for muting the radio. The small mute cable is supplied with changeable fuses. How to change the fuses is indicated in the illustration. The ISO cable connects the handsfree unit with the power supply, the ignition system, the mute socket, the speakers and the radio of the car.
INSTALLATION OF THE BLUE SWITCH Important! • • • Make sure that all the necessary cables, the handsfree unit and/or the external speaker are well installed before connecting the Blue Switch to the power supply of the car. During operation, do not attempt to access the speaker unit and the sockets of the speaker unit. For disconnecting the Blue Switch, always disconnect the power supply first. HEADSET / CARKIT Please place the unit on the indicated location (see illustration III).
CONNECTING TO THE POWER There are 4 ways of connecting the Blue Switch to the car’s electronic system: 1. Blue Switch Plug & Play: For easy installation (Optional) Connect the adapter for the cigarette lighter to the car and the other end of the cable to the handsfree unit. 2. Blue Switch Quick Installation: Immediately to the car’s electronic system via the small mute cable (Optional). The wires of the small mute cable are color-coded.
CAR RADIO MUTING (CRM) The Blue Switch allows muting your car radio when there is an incoming call. • Check the user’s manual of your car radio and ensure that it has a Mute function. If additional settings have to be set from the car radio menu, make sure that they are done correctly. • Remove the control panel of the car radio. • Remove the decorative panel and take the car radio out of the sleeve using the handles. Disconnect the car radio plug.
7 5 3 1 8 6 4 2 Y1 7 5 3 1 8 6 4 2 Y2 8 6 4 X1 2 7 5 3 1 8 6 4 2 7 5 3 1 X2 GB-14 POWER/MUTE X1 1. blue (to mute box) + green yellow (toY1) ignition (+12V) 2. black + black (Ground) 3. blue (Aerial*) 4. violet (Illumination*) 5. green (Mute N1) 6. green yellow (to mute box) + yellow (to Y1) (+12V) permanent 7. white (Mute N2) 8. brown (Mute N3) SPEAKERS X2 1. green (LB+) 2. green yellow (LB-) 3. blue (LF+) 4. white (LF-) 5. yellow (RF+) 6. brown (RF-) 7. black (RB+) 8.
4. Blue Switch Pro Music 100: Immediately to the car’s electronic system via system cable Pro Music 100 (Optional) • • Take out your car radio according to the specifications of your car and your radio. Unplug the antenna plug from your radio and connect it to the female antenna socket of your Pro Music 100. – – – • • • • • • If the car has DIN type (1), make the connection via the conversion plug (3). If the car has ISO type (2), make the connection directly.
USE WITH AUDIO DEVICE • Connect the jack plug of your Pro Music 100 to your audio device. • Connect your charging cable to your music device when you need to charge the battery. • Select the frequency of the Pro Music 100 on your car radio (please store this frequency as a preset). • Press the control button on the cable of your Pro Music 100 to switch it on or off.
OPERATION OF THE BLUE SWITCH CHARGING THE BLUE SWITCH The mr Handsfree Blue Switch comes with a rechargeable battery included. Make sure that your Blue Switch is fully charged before using it. It takes about 3 hours to fully charge the battery. The Blue Switch offers 2 charging options: 1. Via the cradle with USB cable: connected to your computer 2.
3. Paired devices remain paired even when: • One of the devices is not turned on. • A service connection is interrupted or the service stopped. • One or both devices are rebooted. Connection In some cases the Blue Switch can be disconnected from your phone and you will need to restore the connection. • If the Blue Switch has been switched off: Switch on the power and the connection will be restored automatically.
Blue Switch is turned on. In that case, the headset / carkit won’t ring when there is an incoming call. Press the Central button for 1 sec. to reconnect the Blue Switch with your mobile phone for an incoming call. • End a call: Press the Central button (1) to end the current call. • Reject a call: Press the Central button (1) for 3 seconds to reject the call. • Voice dialing: Press the Central button (1) until you hear a tone that indicates that you can pronounce the desired name (=’voice tag’).
• Transferring calls: Press the Volume buttons (+) & (-) (2) simultaneously to transfer the call to the mobile phone while talking on the headset / carkit. The headset / carkit will be turned off. → If you want to transfer the call back to the headset / carkit, press the Volume buttons (+) & (-) (2) simultaneously again. • Restoring default settings of the Blue Switch: In Standby mode, press and hold both Volume buttons (+) & (-) (2) simultaneously until the blue LED indicator (3) flashes.
CARE AND TECHNICAL MAINTENANCE The Blue Switch is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any guarantee obligations and to enjoy this product for many years. • Keep the device and all its parts dry. Precipitation, humidity and all types of liquids or moistures can contain minerals that will corrode the electronic circuitry. • Do not store the device in hot areas.
• This guarantee does not cover and is void with respect to the following: Products which have been subjected to improper installation, unauthorized repair, improper maintenance, unauthorized modifications or other acts which are not the fault of mr Handsfree; (b) Products which have been subjected to misuse, abuse, neglect, improper handling and storage, an accident or physical damage; (c) Products which have been subjected to fire, water, excessive humidity, sand, dirt, extreme changes in temperature or o
Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment. Q.R.G.