BT24PAK User Manual Accessories 1. Micro USB Cable 2. 3.5mm audio cable Please read carefully the manual before using and keep it as a record. Know your headphone: 1.
Three Direction – Three Functions a. Move Upwards: Volume +/ Previous music b. Move Downwards: Volume -/Next music c. Press it Inside: Pause /Play 2. power button / Bluetooth power button 3. Micro USB slot 4. Line in slot 5. Mic ■Specification and technical features: Dimension :170x200x75(mm) Weight :189g(bare headphone, without packing) Charging interface: Micro USB Press buttons: two (power button + three-way button ) Battery :3.7V/250mAh Charging specification:Micro USB Charging input :5V/1.
Directivity: Full direction S.P.L:-42±3dB Impedance: ≤2.2KΩ Frequency Response: 30-16,000HZ Operating voltage: 4.5V ■Bluetooth Mode: Bluetooth Protocol version: CSR Ver 2.1+EDR Profile:HSP1.2/HFP1.6 Remote control to the player: Volume up and down, Previous /Next, Pause/Play Device Mode Number: BT24PAK Matching code: 0000 RF transmit:+4dBm(Max) Receiving sensitivity:-90dBm Transmission Range (Hz) 20 - 20,000 Antenna Gain: above -3.5dB Human Gain: above -6.
Afterwards, input pairing password or PIN code ”0000” and click ”yes” or “confirm”, the headphone will connect with your Bluetooth device successfully. ※The headphone will enter in power-on mode if releasing power button before red and blue LED light glitters in turn. In this case, please turn off the power and operate it once again. Answering calls: Press the power button once to answer the incoming calls.
EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2008 EN55020:2007 Made in PRC For more information please visit our website www.mpmaneurope.