User Manual
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
MOZA AirCross 3 Overview 8 1. Tilt Motor Lock 1 9 10 3. Quick Release Plate 2 3 11 2. Extension Port 4. Tilt Adjustment Slider 5. Pan Motor Lock 6. Foldable Safety Lock 4 7. Smart Trigger 5 6 7 12 8. Quick Release Plate Knob 13 14 10. Roll Knob 15 9. Quick Release Baseplate Knob 11. Roll Motor Lock 12. Pan Knob 13. USB-C Charging Port 14. Battery Indicator Light 15. Power Button 19 20 21 16 17 16. OLED Screen 17. Joystick 22 18. 1/4’’ Extension Port 23 24 19. Camera Control Port 20.
Preparation Unfold the Gimbal 1.Rotate the foldable Knob; 2. Unfold the handle until it is locked. 3. Tighten the knob to prevent the handle from loosening. Attaching the Tripod 1. Screw the mini tripod into the screw hole at the bottom of the handle. 2. Expand the mini tripod Battery Charging Please charge the battery through the USB-C charging port using a USB-C cable (Included) and a USB adapter (Not included). It is recommended to use a USB adapter with QC2.
Unlock the Gimbal Rotate the motor lock to the unlocked position, and then each motor can rotate freely. Note: Do not rotate the motor before unlocking, otherwise the motor lock may be damaged. If the gimbal is turned on before unlocking, the gimbal will enter sleep mode. Mounting the Camera Make sure to prepare the camera before mounting, confirm the battery is fully charged and a memory card with sufficient storage space is inserted. 1.
Note: a. When installing the camera, if the right side of the camera interferes with the tilt arm caused the installation to fail, loosen the knob of the quick-release baseplate and move it to the left until the camera can be installed successfully. b. After the camera is installed, move the quick-release baseplate to the right and make sure the camera's right side is aligned with the tilt arm to achieve the best stability. Balance Adjustment 1. Balancing the tilt axis vertical a.
3. Balancing the Roll Axis a. Unlock the Roll axis. b. Slightly adjust the roll arm left and right until it’s completely horizontal. c. Lock the roll axis. 4. Balancing the Pan Axis a. Hold the gimbal at an angle of 45° horizontally, turn the pan arm to a horizontal angle. b. Unlock the Pan axis and slightly adjust the pan arm left and right. c. The Pan axis is balanced when the camera is steady, lock the pan axis.
Camera Control Button Press halfway: Autofocus One click Start recording Press and hold for 3 seconds: take a photo Function Button: One Click: Follow mode(Pan-Tilt Follow, All Lock) Double Click: Sport Gear Mode Triple Click: Inception Mode Long Press: Enter/Exit Menu Trigger Button One Click: Start/Stop AI Follow Mode Double Click: Re-center Triple Click: Selfie Mode Press and Hold: All Lock One Click and Hold: Pan-tilt Follow Advanced Features Please visit www.gudsen.com for the complete user manual.
Specifications Model: AirCross 3 Weight: 1.3kg without tripod Dimension: Unfold: 170*190*310mm, (W*D*H) folded: 52*225*270mm Battery Type: Li-ion Intelligent Battery(built-in), 24.718Wh Battery Capacity: 3400mAh Standard Votage: 7.27V Charging Votage: 5V/2A, 9V/2A Working hours: 20H Fast-charging time: 1.4H Bluetooth: BT5.0 2.400 GHz -2.4835 GHz Environmental Working temperature: -10 -50 ; requirements: Charging temperature: 5 -40 Safety Caution 1.
AirCross 3 8 1 9 10 2 3 11 4 5 12 13 14 6 7 15 19 20 21 16 17 22 23 24 18 8
9
10
11
12
MOZA Master iOS Android 13
14
Shenzhen Gudsen Technology Co.