K500HPEL WirelessHomePhoneBaseStation User Manual Date:2019-07-18 Version:Draft
Contents 2.5 Manage Your Voicemail ............................................................. 6 2.6 Set Up a Conference Call ............................................................ 6 2.7 Use Call Waiting ......................................................................... 7 2.8 Forward Incoming Calls .............................................................. 7 2.9 Use TTY Mode ............................................................................ 7 2.
K500HPEL 1. Getting Started 1.1 Know Your Device Your K500HPEL Wireless Home Phone Base Station lets you make calls with your wireless service provider’s cellular network. *For use by manufacturer.
K500HPEL 1.3 Charge Your Battery 1.2 Install Your Battery 1. 1. 2. With the back cover facing upright, and slide your top hand down to Connect the adapter(included) to the power socket on the K500HPEL. Do not force the connector into the power socket. Connect the charger to a standard AC power outlet. remove the back cover. 1.4 Status Indicators The indicator lights show the device’s status. Indicator Power 2.
K500HPEL Service with the 4 Bars lights Limited or no service, searching for off service, IMS registration failed. Network solid red with No SIM or SIM error 2. Using Your K500HPEL 2.1 Power ON or OFF the 4 Bars lights off Network icon and 4Bars Signal strength indicator, weak to solid green strong signal • To power on your K500HPEL, slide the Power Switch to the ON position. • To power OFF, slide the Power Switch to the OFF position. 1.
K500HPEL 1. Pick up the handset of the connected home phone. Note: If your home phone(s) have volume controls, they are independent of 2. Dial the phone number. the K500HPEL’s Volume Setting Mode. 3. Wait approximately 4 to 12 seconds for the call to be connected automatically. Note: You will need to dial 10 digits, even for local numbers. 2.5 Manage Your Voicemail Your K500HPEL can divert calls to the voicemail, so callers can leave voicemail Answer a Call messages when they cannot reach you.
K500HPEL 3. When you hear a dial tone, dial the second number. 4. When you’re connected to the second party, press the 3 key and the Flash 2.8 Forward Incoming Calls (or Talk) key to complete the three-way connection. The call forwarding feature allows you to forward your incoming calls to 5. To end the conference call, hang up your home phone or return the phone another phone number, such as your mobile phone or office number. If you’ve receiver to its base.
K500HPEL 2.10 Use Advanced Settings Type Lithium battery Capacity 2800mAh Command Description Talk Time Approximately 4 hours *955*3284# Reset your device to factory settings. Standby Time Approximately 36 hours *955*238*xx# Set the auto-dialing time. Replace xx with a number indicating the desired time in seconds, from 4 through 12. The default time is 4 s. *955*338*xx# Set the flash diagnostic time. Replace xx with a number 4.
K500HPEL repadly or both off the adapter 5. Regulatory and Safety Information and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help.
K500HPEL • Do not short circuit a battery or allow metallic conductive objects to • Only use original accessories, or accessories that are authorized by contact battery terminals. KONNECTONE, with the K500HPEL. Unauthorized accessories may affect the • K500HPEL performance, damage the K500HPEL, or cause danger to you. Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725.
K500HPEL • Use the K500HPEL within the temperature range of 14°F to 113°F (-10°C to End User shall have no right to reject or return the Product, or receive a 45°C), and store within the temperature range of -40°F to 158°F (-40°C to refund for the Product from KONNECTONE under the above-mentioned 70°C). The humidity range is 5% to 95%. situations. • This warranty is End User’s sole remedy and KONNECTONE’s sole liability for Do not use your K500HPEL during a thunderstorm.