User's Manual

ManualsBrandsMoxa ManualsElectronicsIndustrial WiFi module

Industrial WiFi module

WM-AN-AT-01 User Manual

1. Scope

This document is to define the product specification for 802.11a/b/g/n WiFi module of

WM-AN-AT-01. All the data in this document is based on Qualcomm Atheros (QCA)

AR6003X data sheet issued in January 2010, and other documents provided from

Qualcomm Atheros.

2. General Features

Item

Description

Standard

Complies with the latest IEEE 802.11a/b/g/n wireless LAN

Chip Set

Qualcomm

Atheros AR6003X single

chip client

Data Rate

802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps, auto rate

802.11b: 11, 5.5, 2, 1Mbps, auto rate

802.11/n 2.4GHz : HT20 -MCS 0 - 7

802.11/n 5GHz : HT20 & 40

MCS 0

Modulation

OFDM (54, 48, 36, 24, 18, 12, 9,

6Mbps)

OFDM (MCS0, MCS1, MCS2, MCS3 MCS4, MCS5, MCS6,

MCS7)

CCK (11Mbps, 5.5Mbps)

DQPSK (2Mbps)

DBPSK (1Mbps)

Operating Frequency

2.4GHz band: 2.4 12

–

2.483 GHz

5GHz U-NII 1 band: 5.15 – 5.25 GHz

5GHz U-NII 2A band: 5.25 – 5.35 GHz

5GHz U-NII 2C Band: 5.47 ~ 5.725 GHz

5GHz U

NII 3 band: 5.725

–

5.825 GHz

FCC Regulatory Domain

FCC 15.247 DTS

FCC 15.407 UNII

3. Specifications

When you enable the application program of WIFI, many wireless applications will

become possible, such as: Communicate with each other wirelessly, including shares

or exchanges of data.

The WM-AN-AT-01 module consists of a WiFi chipset (AR6003), a 2.4GHz Power

Amplifier, a 2.4GHz Band-Pass-Filter, a 5G FEM, a RF Diplexer, and a 26MHz crystal,

the wifi communication is performed by AR6003 chipset and host CPU which is

controlled by SDIO interface.

3.1 Power Management

The WM-AN-AT-01 has an integrated Power Management Unit (PMU) which generates

all the power supplies required by its internal circuitry from external 3.3V and 1.8V

Summary of content (4 pages)

PAGE 1
Industrial WiFi module WM-AN-AT-01 User Manual 1. Scope This document is to define the product specification for 802.11a/b/g/n WiFi module of WM-AN-AT-01. All the data in this document is based on Qualcomm Atheros (QCA) AR6003X data sheet issued in January 2010, and other documents provided from Qualcomm Atheros. 2. General Features Standard Chip Set Item Data Rate Modulation Operating Frequency FCC Regulatory Domain Description Complies with the latest IEEE 802.
PAGE 2
supplies. The main components of the PMU are as follows: ■ A linear regulator (SREG) which converts the host IO supply to a 1.2V supply for some small control blocks which are turned on when CHIP_PWD_L is de-asserted. ■ A linear regulator (DREG) which converts the 1.8V input to 1.2V for the bulk of AR6003X core digital circuitry. ■ A linear regulator (AREG) which converts the 1.8V input to 1.2V for the AR6003X core analog circuitry. 3.
PAGE 3
5. Regulatory FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
2) Please see the full Grant of Equipment document for other restrictions. ANTENNA USED This radio transmitter FCCID: SLE-WM-AN-AT-01 has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. No. Manufacturer Part No.