UC-8200 Series Hardware User’s Manual Edition 1.0, February 2019 www.moxa.com/product © 2019 Moxa Inc. All rights reserved.
UC-8200 Series Hardware User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice © 2019 Moxa Inc. All rights reserved. Trademarks The MOXA logo is a registered trademark of Moxa Inc. All other trademarks or registered marks in this manual belong to their respective manufacturers.
Table of Contents 1. Introduction...................................................................................................................................... 1-1 Model Descriptions .............................................................................................................................. 1-2 Package Checklist ............................................................................................................................... 1-2 Product Features ......................
1 Introduction The UC-8200 computing platform is designed for embedded data-acquisition applications. The UC-8200 platform comes with two RS-232/422/485 serial ports and dual 10/100/1000 Mbps Ethernet LAN ports, as well as a Mini PCIe socket to support cellular and Wi-Fi modules. These versatile communication capabilities let users efficiently adapt the UC-8200 to a variety of complex communications solutions.
UC-8200 Series Hardware Introduction Model Descriptions The UC-8200 Series includes the following models: • UC-8210-T-LX: Industrial computing platform with 2 serial ports, 2 Ethernet ports, 1 CAN port, USB, micro • UC-8210-T-LX-S:Industrial computing platform with 2 serial ports, 2 Ethernet ports, 1 CAN port, TPM, SD socket, -40 to 85°C operating temperature range USB, micro SD socket, -40 to 85°C operating temperature range • UC-8220-T-LX: Industrial computing platform with 2 serial ports, 2 Ethern
2 Hardware Introduction The UC-8200 embedded computers are compact and rugged, making them suitable for industrial applications. The LED indicators allow you to monitor device performance and quickly identify issues, and the multiple ports can be used to connect a variety of devices. The UC-8200 Series comes with a reliable and stable hardware platform that lets you devote the bulk of your time to application development.
UC-8200 Series Hardware Hardware Introduction Appearance UC-8210 Series Top Panel View Front Panel View 2-2
UC-8200 Series Hardware Hardware Introduction Bottom Panel View 2-3
UC-8200 Series Hardware Hardware Introduction UC-8220 Series Front Panel View 2-4
UC-8200 Series Hardware Hardware Introduction Bottom Panel View Dimensions Unit: mm (in) UC-8210 Series 2-5
UC-8200 Series Hardware Hardware Introduction UC-8220 Series 2-6
UC-8200 Series Hardware Hardware Introduction LED Indicators The function of each LED is described in the table below: LED Name Color Function USB Green Steady On USB device is connected and working normally. Off USB device is not connected. micro SD Green Steady On SD Card inserted and working normally. Off SD card is not detected. Power Green Power is on and the computer is working normally. Off Power is off.
UC-8200 Series Hardware Hardware Introduction Installation Options DIN-rail Mounting The aluminum DIN-rail attachment plate is already attached to the product’s casing. To mount the UC-8200 on to a DIN rail, make sure that the stiff metal spring is facing upwards and follow these steps. UC-8210 1. Pull down the bottom slider of the DIN-rail bracket located at the back of the unit 2. Insert the top of the DIN rail into the slot just below the upper hook of the DIN-rail bracket. 3.
UC-8200 Series Hardware Hardware Introduction Optional Wall Mounting The UC-8200 Series can be mounted on to a wall using a wall-mounting kit as shown in the following illustrations. Step 1 Step 2 Use four screws to fasten the wall-mounting Use another four screws to mount the computer on brackets on the left panel of the computer. a wall or a cabinet. The optional wall-mounting kit is not included in the product package and should be purchased separately.
3 Hardware Connection Description In this chapter, we describe how to connect the UC-8200 to a network and various devices.
UC-8200 Series Hardware Hardware Connection Description Wiring Requirements In this section, we describe how to connect various devices to the embedded computer. Be sure to read and follow these common safety precautions before proceeding with the installation of any electronic device: • Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point.
UC-8200 Series Hardware Hardware Connection Description Connecting to the Network The Ethernet ports are located on the front panel of the UC-8200 computers. The pin assignments for the Ethernet port are shown in the following figure. If you are using your own cable, make sure that the pin assignments on the Ethernet cable connector match the pin assignments on the Ethernet port.
UC-8200 Series Hardware Hardware Connection Description Connecting to the Console Port The console port is an RS-232 port located on the top panel, and can be connected to with a 4-pin pin header cable. You can use this port for debugging or firmware upgrade. Pin Signal 1 TxD 2 RxD 3 NC 4 GND Connecting the CAN Port There is a CAN port in DB9 interface, located on the bottom panel. Refer to the figure on the left for detailed pin definitions.
UC-8200 Series Hardware Hardware Connection Description Inserting the SIM Card The UC-8220 computer comes with a SIM card socket that allows users to install two SIM card for the cellular communication. Step 1 Step 2 Remove the screw on the SIM card holder cover Insert the SIM card into the socket. Make sure you located on the bottom panel of the UC-8220 insert in the right direction. To remove the SIM card, computer. press the SIM card in to release and then you can pull out the SIM card.
A Regulatory Approval Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Class A: FCC Warning! This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Taiwan NCC Support FDD LTE 850/900/1900/2100 MHz 減少電磁波影響，請妥適使用 『注意：行動電話業務(2G)於106年6月停止提供服務後，本設備2G功能在國內將無法使用。』
