User Manual SMART CONTROLLER MC710
ENCLOSURE 1. SMART CONTROLLER 2. Micro USB charger 3. Manual PRODUCT COMPONENTS OF SMART CONTROLLER UNIT 3.
CHARGING Connect a micro USB charger to the charging port and plug it into USB port of PC. Before using the unit, charge the battery completely. The LED blinks in RED while charging and will be off when charging is completed. Low battery alarm : When the battery is low, the LED will blink in RED three time and beep sound every 30 seconds. Once MC710 alerts, please charge immediately, otherwise MC710 will be powered off within approx. 10 minutes.
Auto Reconnection : MC710 will try to re-connect to the last connected devices when you turn on the MC710.
HANDS-FREE CALL Making a call: Press button for 2 seconds Receiving a call: Press button Rejecting a incoming call: Press button Ending a call: Press button Call waiting : press two seconds and you will be connected to the waiting call. Transferring a call : To transfer a call from your device to MC710 and vice versa, press button for 2 seconds HOW TO SWITCH THE MODE You can switch from Navigation Mode to Multimedia mode and vice versa by pressing -4- button on Keypad.
STATUS INDICATION STATUS ON Pairing mode Connectable mode Connected mode Active on a call Receiving a call Charging Fully charged Require charging LED STATUS Blue LED light blinks twice Blue LED light blinks quickly.
SAFETY AND GENERAL INFORMATION 1. Please read this guidebook carefully and follow the instruction. 2. To avoid any damage or malfunction of the unit, do not drop it from high place. 3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit. 4.
If this equipment does cause harmful interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experiencedradio/TV technician for help.” FCC RF Radiation Exposure Statement 1.
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.