Gyration Ultra Cordless Optical Mouse User Manual
Product Specifications Spec System Requirements Ultra Cordless Optical Mouse T T T T Size Weight Operating Range RF Receiver Full functionality on Mac and IBM compatible PCs running Windows 2000, ME, XP or higher Available USB port CD ROM drive (for GyroTools installation) Microsoft or Mac compatible mouse driver 4.8”L x 2.0”W x 1.8”H (12.2cm x 5.1cm x 4.5cm) 5.3 oz (150g) with battery pack Consumer model - Up to 25 feet (7.
Gyration Ultra Cordless Optical Mouse Identifying the Parts Included with your mouse are the following components: Ultra mouse - Consumer: mouse handset, charging station, RF receiver, NiMH battery pack, AC adapter Ultra mouse - Professional: mouse handset, charging station, RF receiver, 2 NiMH battery packs, inline charger, AAA battery clip, GyroTools CD, AC adapter Installing and Charging the Batteries The Ultra mouse comes with a NiMH battery pack already installed but you will need to remove the plast
partment. This clear plastic tab prevents the battery from discharging until you are ready to use your mouse. 1. Press release button on the end of the mouse and lift battery pack off. 2. Remove and discard plastic tab. 3. Replace battery pack by snapping into place. Important! Your mouse must be charged for 8 hours prior to first use. To charge your mouse: 1. Be sure that the NiMH battery pack is firmly in place. 2. Connect power adapter to charging cradle and plug into AC power source. 3.
1. Insert 3 AAA batteries into battery clip. 2. Attach battery clip to mouse by snapping into place. Setting Up and Synchronizing Ultra Mouse and the Receiver: 1. Make sure the mouse is fully charged. 2. Power on your computer and connect the Receiver’s USB cable into an available USB port on your computer. Follow standard USB device installation screens. 3. Press and hold the LEARN button on the Receiver for 2 seconds.
Determining Which Channel Ultra Mouse is Using The Ultra mouse has eight individual channels available to it. To determine which channel a device is currently using: 1. Press and quickly release the CHANNEL button on the bottom of the mouse handset. Count the number of times the red LED on the bottom of the handset or the green LED on the top of the handset flashes. The number of flashes indicates the channel the handset is using.
and its optical sensor allows for precise tracking on virtually any surface (for optimal performance, avoid highly reflective glass or mirrored surfaces). To use on the desktop: 1. Set up and synchronize the mouse with the Receiver (see page 3). 2. Remove the fully charged mouse from the charging cradle and place it on a flat surface. The LED light on the receiver base will flicker rapidly when communicating with the mouse handset. 3. Use the mouse like a standard desktop mouse.
While holding the ACTIVATION TRIGGER, flex your wrist up, down, sideways, in a manner similar to using a flashlight. The mouse cursor tracks the motions of your hand. 4. Use your thumb to press the left/right mouse buttons or to operate the scroll wheel. 5. Double-click the ACTIVATION TRIGGER to keep the cursor continuously active. To stop the cursor, click the ACTIVATION TRIGGER once. Powering Off Ultra Mouse To power off the Ultra mouse: 1.
coverage with the cursor. T Acceleration – Low or Off. Ultra Mouse Troubleshooting Tips Symptom Reason Solution Mouse LED comes on when activate button is pressed, but receiver is unresponsive Mouse and Receiver not Synchronized Perform a Teach/Learn sequence. (See “Getting Started” on page 1.) Cursor is visible but shows no movement Gyro not activated Squeeze or double-click trigger on bottom of mouse. Cursor movement is choppy or erratic Radio interference 1.
Gyration RF Receiver Learn Button Pressing the LEARN button for 2 seconds puts the receiver into “Learn Mode” allowing you to synchronize one or more devices with the receiver. After devices have been synchronized, pressing the LEARN button again for 2 seconds takes the receiver out of Learn mode. If the receiver is not manually taken out of Learn Mode, it will automatically return to Normal Mode after five minutes.
T The Status LED flickers rapidly when the receiver is operating in “Normal Mode” and a synchronized device is transmitting. If there is radio interference, the flickering light will be inconsistent. T The Status LED blinks slowly (1 blink per second) when the receiver is in Learn Mode and is awaiting a Teach instruction from a device. T The Status LED blinks rapidly for a 4-second burst when it is in Learn Mode and processing a Teach instruction and synchronizing the receiver with the device.
simultaneously with any of the devices on the other channel. Two devices that share a channel may not be used simultaneously. When installing the devices try to determine which devices will be used simultaneously and set them on opposite channels. The following example describes a single-receiver system with two mice and a keyboard that requires one mouse to be used by a presenter for cursor control while another presenter inputs data on the keyboard.
REGULATORY INFORMATION ATTENTION! THIS DEVICE EMITS RADIO FREQUENCIES AND HAS NOT BEEN CERTIFIED BY THE FAA FOR USE ONBOARD AIRCRAFT. DO NOT USE THIS DEVICE AT ANY TIME ONBOARD CIVIL AIRCRAFT. TO MINIMIZE THE POSSIBILITY OF INTERFERENCE, POWER OFF MOUSE TO ENSURE THAT IT REMAINS OFF DURING FLIGHT. FCC Statement The Ultra Cordless Optical Mouse and RF Receiver have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1. these devices may not cause harmful interference, and 2. these devices must accept any interference received, including interference that may cause undesired operation. The mouse operates in the frequency band of 49.82 to 49.9 MHz with RF output power of less than 30 MicroWatts EIRP (Effective Isotropic Radiated Power). Warning: Using these products in any way other than as described in this manual or altering the antenna in any way may violate FCC rules.
Contacting Gyration If you have any questions on your new Gyration product, please use any of the phone/FAX numbers or addresses below: Main Office Gyration, Inc. 12930 Saratoga Avenue, Bldg. C Saratoga, CA 95070 USA Phone: 408-255-3016 Fax: 408-255-9075 Sales Phone: 800-316-5432 (Toll-free in US and Canada) Fax: 408-351-4433 E-mail: sales@gyration.com Technical Support Phone: 408-973-7086 E-mail: support@gyration.com World Wide Web www.gyration.
permission from Gyration. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication, nor as a result of service to the product by anyone other than by Gyration. Gyration is not responsible for any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, this product. This includes damage to property and, to the extent permitted by law, damages for personal injury.
Gyration Ultra Cordless Optical Mouse User Manual Gyration, Inc. 12930 Saratoga Avenue, Bldg. C Saratoga, CA 95070 1.800.316.5432 www.gyration.