Move It Beat Smart Dumbbell User Guide v2.0.
Box Contents 1x Dumbbell bb ll with h a sensor module d l (black (bl k display d l screen) 1x Dumbbell 1 D bb ll without ith t a sensor module d l 1x USB Charging Cable 1x User Guide 1x Warranty Card
Initial Device Setup Please pair and setup through the Move It app 1. Retrieve the Sensor Module Push out the sensor module (indicated by a black display) from the rear of the dumbbell as shown. 1 2. Activate the Sensor Module Insert the charging cable into a computer or a USB power source, then connect the cable to the sensor module. Charge the sensor module for at least 20 minutes or until two bars are fully lit. 2 曲线大于 0.
3. Re-insert the Sensor Module Align the sensor module’s notch and insert it into the dumbbell as shown. The screen will display the corresponding dumbbell weight once the module has been securely inserted. 3 4. Download the Move It App Scan the QR Code to download the Move It app. The app supports mobile devices with Apple iOS 9.0 or Android 4.4 and higher. For iOS Users For Android Users Alternatively, get the app by searching Move It Fitness on either Apple Appstore or Google Playstore.
. Pair & Setup through the Move It App For new accounts: Turn on your phone’s Bluetooth, open the Move It app and follow the onscreen prompt during the account setup process. For existing accounts: Turn on your phone’s Bluetooth, open the Move It app, proceed to 「 Me 」, select Smart Dumbbell from 「 Device Management 」,and allow the app to complete the pairing setup process. Starting your Workout 1. Enter 「 GO 」from the Move It app’s home screen. 2.
Sensor Module Status Indicators Display Info Fully Lit: battery is fully charged (each bar represents 25%) Slow Blink: battery is charging Fast Blink: battery is low Slow Blink: waiting to be connected with the Move It app Fully Lit: connected with the Move It app Fully Lit: grip with right hand for proper motion sensing Audio Feedback Beep 1x Disconnected from the Move It app Beep 2x Connected with the Move It app Beep 3x Battery is low.
Additional Information Pairing Troubleshoot 1. The product must be paired through the app. Pairing with the phone’s operating system’s Bluetooth setting does not provide any functionality. 2. To avoid signal interference during the initial pairing and setup process, please turn off nearby Bluetooth devices. 3. If you are still unable to detect your device during the pairing and setup process within the app, restart your phone or try turning the Bluetooth off and back on again. 4.
2TQFWEV 5RGEKƒEKCVKQPU Model No: MVDB Dimensions: 0.5kg (L190 * W58 * H58mm) 0.75kg (L200 * W58 * H58mm) 1.0kg (L210 * W58 * H58mm) Materials: Cast iron, TPU, polycarbonate App Support: iOS 9.0 & Android 4.4 and above Wireless Connection: Bluetooth 4.0 Sensor: 6-Axis Gyroscope Battery: 180 mAh Charging Port: Micro-usb Input Rating: 5V 1A Designed in Hong Kong.