Move It Speed Quick Start Guide MVPB0010 (v1.2.
What’s in the Box Upper Rod x1 Base x1 Middle Rod x1 Base Rod x1 Accessory Box Air Pump & Pump Needle x1 Bag Sensor Unit x1 Bolt & Nut Tool / Lubricant x1 Sensor Battery & Charging Cable x1 Bolt & Nut x2 (1 spare) Top Bracket x1 Large Washer x1 Mid Rod Cap x1 Lock Knob x1 Bottom Bracket x1 Small Washer x1 Spring Washer x1 Large Screw x1
Overview Air Pump Socket Sensor LED Punch Bag Sensor Power Button Sensor Battery (Rear) Nut Bolt Upper Rod Height Adjust Pin Mid Rod Cap Mid Rod 6 Height Adjust Socket Lock Knob Locking Pin Socket Locking Pin Base Rod Speed Adjust Top Bracket Large Washer Base Bottom Bracket Spring Washer Small Washer Large Screw Assembly Before assembly, please prepare the corresponding screwdriver for the two screw types. For a video assembly tutorial, scan the QR code.
Step 1 of 10: Secure the Base Rod Insert the base rod through the large washer, top bracket, base, bottom bracket, small washer and spring washer. Tighten everything in place with the large screw.
Step 2 of 10: Fill up the Base with Water Loosen the base cap, then fill up the base (13L) with water. Close and tighten the base cap once the base is filled close to the brim. For additional grip, you may wet the suction feets prior to setting it on a smooth surface.
Step 3 of 10: Connect the Middle Rod · Insert the base rod’s locking pin into the mid rod’s bottom socket. · Tighten on the lock knob to secure the mid rod in place.
Step 4 of 10: Connect the Top Rod · Carefully insert the rubber end of the top rod into the mid rod · Secure the top rod’s locking pin into one of the mid rod’s height adjust sockets. · Insert the mid rod cap over the top and mid rod, then turn it clockwise to tighten the mid rod cap in place..
Step 5 of 10: Inflate the Punch Bag · Retrieve the pump needle and attach it to the air pump. · Insert the pump needle tip into the punch bag’s valve stem. · Pinch and hold the punch bag’s valve stem as you inflate the bag until it is firm to the touch.
Step 6 of 10: Secure the Sensor Bag Unit · Insert the top rod’s upper two sockets into the bag sensor unit’s two bottom notches. · Next, align the bag sensor unit’s bottom left and right screw hole with the top rod. · Lastly, insert the bolt screw through the bag sensor unit and the top rod. Use the provided tool to keep the screw nut in place as you tighten the bolt in.
Step 7 of 10: Insert the Sensor Battery · Insert the sensor battery at the rear of the bag sensor unit. · The bag sensor unit LED should cycle once to indicate that the sensor battery has been securely attached. The bag sensor unit LEDs will pulsate blue while it searches nearby for a phone with the Move It app. Note: if the bag sensor unit does not light up, you may need to remove the sensor battery and charge it by its micro USB slot.
Step 8 of 10: Get the Move It App Scan the QR Code to download the Move It app. Alternatively, search Move It Fitness on either Appstore or Playstore. * only Apple iOS 9.0 or Android 4.4 and higher are supported Step 9 of 10: Pair the Device Please pair the product through the app, and not by the mobile phone’s system Bluetooth setting. Based upon Google’s framework requirement, Android user’s may be required to turn on GPS to maintain a stable connection with the product.
Optimal Bag Height For optimal punching accuracy, its recommended to adjust the top rod so the top of the bag aligns approximately to the height of your shoulders.
Adjust Rebound Speed You may personalize how fast you want the punch bag to return by lowering or raising the Speed Adjust located on the spring. Default Speed Speed Adjust is positioned to the top. Increase Speed Increase the rebound speed by turning the Speed Adjust downwards in a clockwise direction.
Sensor LED Indicators Startup Status Sequence 1x Sensor battery inserted securely Pulse Effect Waiting to be connected with Move It APP Fast Blink 3x Successfully connected with Move It APP During Training Sequence 1x Get ready Blink 1x Accurate strike Blink 1x Target / tempo missed Blink 1x Pause and follow onscreen During Firmware Update Cycle Blink Device firmware updating Cycle Blink Update failed, keep your phone near the device and try again Battery LED Indicators Fully Lit Battery i
FAQ Q: The device is having trouble pairing or connecting to the Move It app. A: Nearby wireless signals may interfere with the initial pairing process or connection with the Move It app. For android phones, please enable GPS for better detection of the product’s Bluetooth signal. Alternatively, you may resolve the issue by restarting both the App and the Bluetooth.
Designed in Hong Kong. Manufacturer: Eggplant Technologies Limited Email support@eggplant-tech.com Address: Webpage: Unit 510, Blk A1, 411 Shougouling Road, Tianhe, Guangzhou, China https://move-it.