User Manual V 1.0 MRW-1 Movcam Tech Co.
1、Contents 2、Learn about HELM Wheels 1 Structure 2 Control panel 3. Parameter setting Movcam Tech Co.
1、Contents Helm wheels is a multifunctional remote controller with high precision. It offers both wired and wireless control over Helm remote head and other third-party 3-axis stage. Helm wheels offers real time data synchronization for better control. The wheels shares almost the same parameter structure and keyboard layout as that of the Helm remote head, which makes it easier for users to operate.
2、Learn about HELM Wheels Structure 1 2 6 8 9 3 4 5 6 6 7 10 11 12 13 1、Handle 2、Sensitivity Knob 3、Display screen 4、Deadband Knob 5、Indicator light 6、Angle Lock 7、Reverse/switch 8、Speed Adjust knob 9、Tighten Knob 10、Base plate 11、Switch/Confirm Knob 12、Detachable module 13、Wheel Movcam Tech Co.
Control Panel 1 8 2 3 4 5 9 10 11 6 13 7 14 12 1 Deadband 2 Pause 3 indicator light 4 Mounting mode switch button 5 Camera REC 6 Return 7 Multi-function button 8 Sensitivity 9 Recenter 10 Play/stop 11 Follow mode switch button 12 REC 13 Enter 14 Display screen Movcam Tech Co.
1 2 3 4 5 6 7 8 9 1 Antenna 2 3/8" threaded holes 3 1/24" threaded holes 4 DC OUT 5 MicroSD card slot 6 MBUS port 7 Power switch 8 Battery release 9 Base plate 10 Battery mount 10 Movcam Tech Co.
Operators can rearrange the composition of the master wheels according to their own preference and for more flexible configuration.
4. Parameter setting After balance adjustment, use the control panel to do set up Helm. Helm can also be controlled via external controller like the wheel controller. Power up Helm before starting setup. 1. 2. Press the Switch/Confirm Knob to enter setup menu. Turn the knob to choose entry for setup. When external controller like the wheel is used to do setup, first step is to enter the System to set wireless channel.
Movcam Tech Co.
HELM remote controlled stabilizaion head MRW-1 Movcam Tech. Co., Ltd F4-Bld2,Guole SciencePark,#1 Lirong Road, Longhua New District,Shenzhen,518109,CHN Tel :+86 755 2658 0888 Fax: +86 75526580999 Email:mov800@movcam.com www.movcam.com P.C.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.