MD2263-XLK INSTALLATION INSTRUCTION x1 42"~86" Max:800x400mm/32x16" Min:200x100mm/8x4" 1 TV 2 (B2)
Before getting started, let’s make sure this mount is perfect for you! MAX:800mm/32" 1 Is your TV VESA equal to/greater than 200x100mm/8x4" and equal to/less than 800x400mm/32x16"? Yes --- Perfect! MAX: 400mm/16" No --- This mount is NOT compatible. 2 Does your TV Yes --- Perfect! (including accessories) weigh less than 120 LBS (54.5 KG)? No --- This mount is NOT compatible.
STEP 1 Attach Brackets to TV Parts and Hardware WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. NOTE: Not all hardware included will be used. TV Brackets Spacers TV Screws M4x12mm M4x30mm x4 M8x22mm M6x17mm x4 x4 M6x12mm 2.
1-3 Attach the TV Brackets No! Spacer(s), screw and washer Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.
STEP 2 Attach Wall Plate to Wall For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B on PAGE 6 Parts and Hardware Lag Bolt M8x60mm Wall plate x4 x2 Mounting Template M8 Washer x4 Allen Key M5x8mm Bolt x1 x8 Connection Plate x1 Concrete Wall Anchor 4pcs Assemble Wall plate Wall plate unit STEP 2A <16mm (5/8") Wood Stud Installations 32"(812.8mm) 24"(609.6mm) /16"(406mm) Min. Wood Stud Size: nominal 4"(102mm) actual 3 1/2"(89mm) Min.
Centre line O Again, find another wood stud Centre line 32"(812.8mm) 24"(609.6mm) 16"(406mm) Mounting Template CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. 2.5"(64mm) Level 7/32" (5.5mm) Wall plate unit Go to Step 3 on PAGE 7.
STEP 2B Solid Concrete Wall Installation Min. 8"(203mm) DANGER 3/8" (10mm) 2.5" (64mm) Mounting Template CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
STEP 3 Hang and Secure TV to Wall Plate Before hanging TV, please conduct "wall plate installation integrity test" first. P O 120 LBS (54.
STEP 4 Adjustment 4-1 TV leveling adjustment (±1°): Loosen 2 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure. Tighten Loosen 4-2 Tilting angle adjustment (+5°/-15°): Loosen handle , adjust TV to your desired position,then tighten handle .
STEP 5 Take Down the TV from the Mount Pull down the straps Product dimensions: 860.6mm MAX:800mm +5°/-15° 64.