Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Visit mount-it.com for product registration and warranty information.

1 of 5

Mount-It!

• • •

Mount-It!

Wire Shelving Cart / Printer Stand

(MI-7856)

PAGE 1
ASSEMBLY INSTRUCTIONS Mount-It! Wire Shelving Cart / Printer Stand (MI-7856) Visit mount-it.com for product registration and warranty information. • • • Contact us at support@mount-it.com for support and questions.
PAGE 2
HARDWARE PACK 1 PARTS LIST CODE DESCRIPTION A Top with Frame B Lower Shelf C Post QTY 1 2 4 D HARDWARE PACK 2 E Half-Sleeve Qty. 24 Non-Locking Caster Qty. 2 G F Caster Wrench (not shown) Qty. 1 Locking Caster Qty.
PAGE 3
1 Attach the casters to the bottom of the posts. Place the Locking Casters on the accessible side of the cart. 2 (x4) (2 per assembled post) D C Small End C Ridge D Groove E F 3 Large End Connect the half-sleeves at the desired height for the lower shelf. Use lowest grooves for maximum capacity. Insert the posts into the corners of the lower shelf.
PAGE 4
Press the lower shelf firmly to position it in place. B 5 D (2 per assembled post) Press the middle shelf firmly to position it in place. Connect the half-sleeves at the desired height for the middle shelf.
PAGE 5
6 D (2 per assembled post) Press the top firmly to position it in place.