MI-386 MI-386W Please Scan this QR code to visit the product page.
Thank you for choosing Mount-It Mount-It! Mount-It! will automatically move to the position saved in the 1. The mount beeps constantly or is making an abnormal noise. a). Reset the system: Press and hold the " " button for 5 seconds. The mount will retract to the highest position, and the reset is complete. c). If the beeps or noise continueplease contact Mount-It! for more assistance. 2. The TV mount stops moving during operation and emits a long beep. a).
COMPATIBLE VESA SIZES 200x100 200x200 300x200 300x300 400x200 400x300 400x400 600x400 COMPATIBLE WITH Screens UP TO 35kg 70 (77lbs) RATED Tools Needed • The height of the mount is dependent on the depth of the mantel to ensure the motorized arm clears the mantel when fully lowered. • Determine the proper wall placement using the chart. Measure the depth of your mantel and locate the closest measurement in column a that your mantel depth is Greater Than Or Equal To.
Step 1a Wood Stud Installation Option Step 1b Concrete/Brick Installation Option • Once the proper height is determined using the Mounting Height Chart. locate the studs using a stud finder and hold the Wall Template (#C) at the proper height on the wall. Use a level to ensure an even installation and mark the wall through the template in the center of the stud with a pencil. • Once the proper height is determined using the Mounting Height Chart.
Step 4 Attaching the TV Plate Step 2 Completing Wall Installation • Plug in the Power Cord (#H) and then attach the Decorative Covers (#B) to cover the wall plate. • Remove the three nuts and washers (pictured here) from the end of the arm using the Wrench (#I). Install the TV Plate (#D) over the three exposed bolts and reinstall the nuts and washers. Tighten until secure. Attach the TV Plate Cover (#F) over the bolts as shown.
Step 5 Attaching the VESA Arms to the TV Step 6 Attaching the TV to the Motorized Arm • Lay your TV down on a flat surface and align VESA Arms (#E) over the VESA holes as shown. • Select the appropriate size mounting bolt (#M-A through M-D) for your display’s mounting holes and verify the length of the VESA bolt is not too long. If you are unsure of the correct bolt size for your display refer to your TV user manual or contact the TV manufacturer for sizing information.
